Hubble X-100 Bedienungsanleitung
HUBBLE LITHIUM X100-48
Integrated Lithium-ion Battery
User Manual
Version：V2.0
Released Date：2020-06-08
Quick Setup
The Hubble is designed to work with 48V UPS and inverter systems and will work under AGM charge
characteristics. For solar inverters that is not on the approved integration list it is recommended to set
your inverter battery parameters manually to ensure your battery operates at optimal levels.
It is highly recommended to study the manual before installation, however for quick setup and startup of
the Hubble Lithium pack, follow the following steps:
1. Ensure cuircuit breaker is in the OFF position
2. Securely connect the DC cables to the terminals ensuring correct polarity.
3. If the unit is in sleep mode (LED lights off), press and hold RESET button for 3 seconds. The LED's
will light up.
4. Switch on DC breaker.
Inverter setup for Axpert King & VMIII (with BMS port)
The below settings is for setting up Axpert type inverters that does not have the lithium comms port.
Item Settings Value
Program 02 Maximum charge current
The Hubble is set to charge at a maximum rate of
21Amps.
Multiple batteries (2 or more) can be setup as as
20Amps x (amount of Hubble units).
Program 05 Battery Type USE
Program 12 Voltage point back to Utility 48V
Program 13 Voltage point back to Battery 51V
Program 26 Bulk Charge Voltage (C.V.) 53.2V
Program 27 Float charge voltage 51.2V
Program 29 Low DC cut-off voltage 46V
The Hubble has full integration with the Axpert King and VMII type inverters and other Axpert type
inverters with a BMS comms port.
To setup the Axpert King or VMIII, ensure you have at least firmware version 02.49 installed on the King
or VMII inverter. If you do not have this version please request it from your inverter supplier.
Connect the communications cable into port RS485-A and the other end into the Lithium RS485 port on
the inverter. Ensure you have the cable connected the correct way around as each side has a different pin
layout.
After the Lithium is connected and the inverter is powered on, change setting 5 in the inverter setup to
"Lib". This will enable the Lithium battery communication.
It takes up to 120 seconds to syncronize the communication. Once the battery icon on the inverter
flashes, communication has been successfully setup. No further settings or setup is required as the
battery will communicate to the inverter what charge, cutoff, float, bulk charge voltage should be used.
Integrated Lithium-ion Battery Pack For Solar &
UPS User Manual
FOREWORD
All Right Reserved ©
ii
FOREWORD
Overview
This manual describes the installation, history recording and parameter settings etc.
Readers
This document provides technical details regarding the tools and infrastructure used
by the following users:
Sales engineer
Technical support engineer
Installation engineer
Application engineer
Maintenance engineer
Symbol convention
The following symbols may appear in this article, and they are represented as follows:
Symbol
Indication
Used as warning in an emergency, if not avoided, it will result in
death or serious personal injury.
Used as a warning of a middle or low potential hazards, if not
avoided, it may cause minor or normal injury.
Integrated Lithium-ion Battery Pack For Solar &
UPS User Manual
FOREWORD
All Right Reserved ©
iii
Used as a warning of potential dangers, if ignore this information,
it may result in equipment broken, data lost, equipment
performance decrease and other unpredictable result.
represents the supplement information of main text to emphasize
or replenish.
Integrated Lithium-ion Battery Pack For Solar &
UPS User Manual
DIRECTORY
All Right Reserved ©
4
DIRECTORY
FOREWORD..................................................................................................................................... ii
DIRECTORY..................................................................................................................................... iv
1OVERVIEW.....................................................................................................................................6
1.1
Product specification................................................................................................................................................ 6
1.2
Product profiles..........................................................................................................................................................6
1.3
Product structure.......................................................................................................................................................7
2ILLUSTRATION............................................................................................................................. 8
2.1
Panel description....................................................................................................................................................... 8
2.2
Menu operation instructions................................................................................................................................13
2.3
The working principle.............................................................................................................................................14
2.4
The product features.............................................................................................................................................. 15
3INSTALLATION GUIDE.............................................................................................................17
3.1
Installation precaution notes................................................................................................................................17
3.2
Installation preparation..........................................................................................................................................19
3.2.1
Unpacking and inspection................................................................................................................................. 19
3.2.2
Installation tools................................................................................................................................................... 20
3.3
Installation and wiring............................................................................................................................................21
3.3.1
Standard cabinet installation.............................................................................................................................21
4MAINTENANCE..........................................................................................................................27
4.1
Electrical maintenance............................................................................................................................................27
4.2
Battery maintenance...............................................................................................................................................28
4.3
Treatment for malfunctions...................................................................................................................................28
Integrated Lithium-ion Battery Pack For Solar &
UPS User Manual
DIRECTORY
All Right Reserved ©
5
5SPECIFICATIONS........................................................................................................................33
5.1
Technical specifications..........................................................................................................................................33
5.2
The main performance index of the battery....................................................................................................34
6ENVIRONMENT PROTECTION..............................................................................................36
6.1
Environmental Label............................................................................................................................................... 36
6.2
Recycle........................................................................................................................................................................36
7APPENDIX....................................................................................................................................37
7.1
Connection cable.....................................................................................................................................................37
8 G-SENSOR……………………………………………………………………………………………………………………………..39
Integrated Lithium-ion Battery Pack For Solar &
UPS User Manual
1 OVERVIEW
All Right Reserved ©
6
1OVERVIEW
1.1 Product specification
The model of integrated lithium Ion battery (hereafter referred to as lithium
battery or PACK) for Solar & UPS is the HUBBLE X-100.
1.2 Product profiles
The lithium battery group is developed by Supplier. Belonging to one of the series of
48V communication for back-up lithium battery products, the system adopts the
international advanced lithium iron phosphate battery application technology and
BMS control technology. Due to it’s a long lifecycle, small size, light weight, stable
performance, safety and environmental protection, as well as a strong ability to adapt,
it can be used in harsh outdoor environments.
Integrated Lithium-ion Battery Pack For Solar &
UPS User Manual
1 OVERVIEW
All Right Reserved ©
7
The system integrates advanced battery manage system (BMS), including charge
and discharge management, thermal management, communication management,
balance management, data management, and realize remote centralized monitoring,
remote management and maintenance of the battery. It has outstanding advantages
in specific occasions, as a backup power supply is widely used in the remote access
network equipment, exchange, mobile communication equipment, transmission
equipment, satellite and microwave communication equipment and communication.
1.3 Product structure
The appearance of the lithium battery pack is shown in figure 1-2, for interface
description; please refer to the 2.2 panel description".
Figure1-2 Product picture
All Right Reserved ©
8
Integrated Lithium-ion Battery Pack For Solar &
UPS User Manual
2 ILLUSTRATION
2ILLUSTRATION
2.1 Panel description
The lithium battery panel as the Figure2-1 shows below.
Figure2-1 Module panel description
For detailed descriptions of each location, see the following figure2-2.
All Right Reserved ©
9
Integrated Lithium-ion Battery Pack For Solar &
UPS User Manual
2 ILLUSTRATION
Handle
Figure2-2 Panel Effect Chart
Made of galvanized steel and make it for transportation.
SOC
The meaning of SOC indication light shown in table 2-1
Table2-1 The relationship between the capacity of the battery and the light
●
●
●
●
Capacity
¤
¤
¤
¤
75%-100%
¤
¤
¤
○
50%-75%
¤
¤
○
○
25%-50%
¤
○
○
○
0%-25%
¤indicates ON，○indicates OFF。
1 Handle
2 SOC (capacity light)
3 ALM（alarm）
4 RUN
5 ADD
6 RS232
7 RS485
8 RESET / POWER ON
9 Dry Contact
10 Main panel
11 Mounting holes
12 Output-
13 MCB
14 Output﹢
15 LCD display
Inhaltsverzeichnis
Andere Hubble Batteriepack Handbücher
Beliebte Batteriepack Handbücher anderer Marken
IOGear
IOGear GBP24V Series Bedienungsanleitung
Inventus Power
Inventus Power PROTRXion S-12V100-TRX-HD Bedienungsanleitung
Clas Ohlson
Clas Ohlson PW-290A Bedienungsanleitung
EINHELL
EINHELL MULTI-Ah Power X-Change Plus Bedienungsanleitung
Samsung
Samsung EB-U3300 Bedienungsanleitung
ECTIVE
ECTIVE LC Series Bedienungsanleitung