HuddleCamHD 3X Handbuch

HuddleCamHD 3x

USB 2.0 PTZ CAMERA

INSTALLATION & OPERATION MANUAL

Ver 1.2 7/15

Precautions………………………………………………………………………………………….

Safety Tips…………………………………………………………………………………………….

Please read this manual carefully before using the camera.

Avoid damage from stress, violent vibration or liquid intrusion during

transportation, storage or installation.

Take care of the camera during installation to prevent damage to the camera

case, ports, lens or PTZ mechanism.

Do not apply excessive voltage. (Use only the specified voltage.) Otherwise, you

may experience electrical shock.

Keep the camera away from strong electromagnetic sources.

Do not aim the camera at bright light sources (e.g. bright lights, the sun, etc.) for

extended periods of time.

Do not clean the camera with any active chemicals or corrosive detergents.

Do not disassemble the camera or any of the camera's components. If problems

arise, please contact your authorized dealer.

After long term operation, moving components can wear down. Contact your

authorized dealer for repair.

In the Box………………………………………………………………………………………….

Supplied Equipment…………………………………………………………………………….

3x Zoom USB 2.0 HD Video Conference Camera (1)

12V/2.0A DC Power Adapter (1)

Tripod Mounting System (1)

USB 2.0 A-A cable (3m)

RS-232C Serial Control cable

RS-232C to RS-485 adaptor cable

IR Remote Controller

User Manual (1)

Ver 1.2 7/15

Physical Description…………………………………………………………………………

1. Front View…………………………………………………………………………………….

1. Lens

2. IR Receiver

To receive IR remote controller signal.

3. Power LED

Blue LED lights when unit is powered, LED is dark for Stand-By status.

4. IR Receiver

To receive IR remote controller signal.

Ver 1.2 7/15

2. Rear View……………………………………………………………………………………

5. DC IN 12V Socket

Only use the Power Adapter supplied with this camera.

6. IR Receiver

To receive IR remote controller signals.

7. VISCA IN Port

For hard wired remote control from a 3rd party PC, joystick, etc...

8. VISCA Out Port/RS485

Used for daisy chaining multiple cameras for RS-232 RS-485 control.

9. USB 2.0 Interface

For connection to PC (USB 2.0 port. Will also function in a USB 3.0 port as USB 2.0

device).

Ver 1.2 7/15

3. Bottom View…………………………………………………………………………………

1. Tripod

Will accept 1/4-20 bolt from 3rd party tripod, wall or ceiling mount using

included tripod adapter.

2. Dip-Switches

Used for selecting serial and IR communications settings.

Ver 1.2 7/15

4. Dip-Switch Settings……………………………………………………………………………

Note: When changing Dip-Switch settings, make all changes with camera powered off.

SW1: Used for setting RS232 address.

Address

SW1 Switch State 1-7, (8 for stand-by)

DIP-1

DIP-2

DIP-3

DIP-4

DIP-5

DIP-6

DIP-7

OFF

Notes:

1. Broadcast address: If the Joystick is 255 (all dip switches on), any Camera can be

controlled by any address.

2. Test Address: If the dome camera address is 0 (all dip switches off), any address

code can control the dome camera.

Ver 1.2 7/15

SW2: Used for communication settings.

SW2 DIP-1,2,3: Baud Rate, Communication Protocol

SW2 DIP-4,5: IR Remote Control Receiving Address Table

IR Remote Address

SW2 Switch State (4-5)

DIP-4

DIP-5

OFF (Def)

OFF

SW2 DIP-6: IR Output

IR Out

SW2 DIP-6

Disabled

OFF (Def)

Enabled

Baud Rate

SW2 DIP-

Communication

Mode

SW2 DIP-

Communication

Protocol

SW2 DIP-

9600bps

OFF

(Def)

RS-232

OFF

(Def)

VISCA

OFF

(Def)

38400bps

RS-485

PELCO-D

Ver 1.2 7/15

Cable Connection Info…………………………………………………………………………

VISCA RS-232C - IN Reference………………………………………………………………

VISCA RS-232C - Out Reference……………………………………………………………

Ver 1.2 7/15

OSD MENU……………………………………………………………………………………………..

There is no On Screen Display for the HuddlecamHD 3X.

Ver 1.2 7/15

IR Remote Controller (Note: Some buttons do not operate for all camera models)

1. Reset:

Restarts the camera and restores it

to Factory Default settings.

(Note: Will delete all memory).

2. Camera Selection

Select Camera ID: 1, 2 or 3

3. Preset Positions

1-9: Preset Positions

Set: Setting Preset Position

Clear: Clear Preset Position

Call: Call Preset Position

Note: If you want to set (or call) the first

preset position to 1, you should press

number key “1”, then press

“Set” (or “Call”) to set (call) the position.

4. Fast Zoom in/out Control Zone

+: Zoom in quickly

-: Zoom out quickly

5. Pan/Tilt Controller

Move Up

Move Down

Move Left

Move Right

Auto Pan

6. Additional Function Zone

Freeze: Image Freeze

BL: Back-light Compensation

WB: White Balance

AE: Auto Exposure

D Zoom: Digital Zoom

HDMI: Swap to HDMI video output

DVI: Swap to DVI video output

Format: Swap between different formats

7. Power Supply Switch

Switch for turning camera on

(i.e. Stand-By mode vs. Working mode)

8. OSD Menu Zone

Dome OSD: Enter Pan Tilt Zoom OSD menu

Lens OSD: Enter lens OSD menu

9. Slow Zoom In/Out Zone

+: Zoom in slowly

-: Zoom out slowly

10. Focus Control Zone

Auto: Turn on auto focus

Manual: Turn on manual focus

Far: Set focus at farther distance

Near: Set focus at nearer distance

Andere Handbücher für 3X

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HuddleCamHD IP-Kamera Handbücher

HuddleCamHD

HuddleCamHD HD Color Video Camera Bedienungsanleitung

HuddleCamHD

HuddleCamHD HuddleCamHD 18x Bedienungsanleitung

HuddleCamHD

HuddleCamHD 3X Bedienungsanleitung

HuddleCamHD

HuddleCamHD conference camera Bedienungsanleitung

HuddleCamHD

HuddleCamHD SimplTrack 2 Bedienungs- und Wartungsanleitung

HuddleCamHD

HuddleCamHD SimplTrack Lite Bedienungsanleitung

HuddleCamHD

HuddleCamHD HuddleCamHD 10X 720p Bedienungsanleitung

HuddleCamHD

HuddleCamHD 10XA Bedienungsanleitung

HuddleCamHD

HuddleCamHD HuddleCam-HD 12x Bedienungsanleitung

HuddleCamHD

HuddleCamHD SimplTrack Lite Bedienungsanleitung

HuddleCamHD

HuddleCamHD 3X Gen2 Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung