HuddleCamHD NDI HX Bedienungsanleitung
Please check HUDDLECAMHD.com for
the most up to date version of this document Ver 1.0 2/20
HuddleCamHD EPTZ Webcam
NDI®|HX EPTZ CAMERA
INSTALLATION & OPERATION MANUAL
Page 2 of 32
Ver 1.0 2/20
Precautions………………………………………………………………………………………….
Safety Tips……………………………………………………………………………………………………
•Please read this manual carefully before using the camera.
•Avoid damage from stress, violent vibration or liquid intrusion during
transportation, storage or installation.
•Take care of the camera during installation to prevent damage to the camera
case, ports, or lens.
•Do not apply excessive voltage. (Use only the specified voltage.) Otherwise, you
may experience electrical shock.
•Keep the camera away from strong electromagnetic sources.
•Do not aim the camera at bright light sources (e.g. bright lights, the sun, etc.) for
extended periods of time.
•Do not clean the camera with any active chemicals or corrosive detergents.
•Do not disassemble the camera or any of the camera's components. If problems
arise, please contact your authorized dealer.
•Contact your authorized dealer for repair.
In the Box…………………………………………………………………………………………….
Supplied Equipment…………………………………………………………………………………….
•HC-EPTZ-NDI Camera (1)
•12V Power Supply (1)
•IR Remote Controller (1)
•User Manual (1)
Page 3 of 32
Ver 1.0 2/20
Physical Description………………………………………………………………………………
1. Front View………………………………………………………………………………………….
1. Lens
108° Field of View lens
2. Power LED
Blue LED lights when unit is powered and on.
3. Mounting Base
Mounting base for camera. 1/4-20 mounting screw.
4. Microphone Array
Beamforming Microphone Array
1
2
3
4
Page 4 of 32
Ver 1.0 2/20
2. Rear View………………………………………………………………………………………………………….
5. RJ-45 Connection
For connection to LAN and for PoE powering
6. USB 2.0 Connection
For future use
7. DC12V Power Connection
For powering on camera
5
6
7
Page 5 of 32
Ver 1.0 2/20
NDI®|HX Connection Guide……………………………………………………………………
This connection guide will explain the method to connect your NDI®|HX camera to your PC
for use with software applications.
Three easy steps:
1. Install the latest NDI® Tools
2. Connect your camera to the NDI® Virtual Input
3. Select the NDI® Virtual Input in your software of choice
Step 1:
•Download and install the latest NDI® Tools
https://www.newtek.com/ndihx/products/
Please note this will install NewTek® NDI® Studio Monitor & NDI® Virtual Input
Step 2:
•Open the NDI® Virtual Input
•Right-click the NDI® Virtual Input and select your camera of choice
Step 3:
•Open your software of choice
•Go to video settings and select video source as “NewTek NDI® Video”
NewTek®, NDI®, & NDI®|HX are all registered trademarks of VZRT Group®.
Please note that your license key is non-transferrable.
Page 6 of 32
Ver 1.0 2/20
OSD Menu………………………………………………………………………………………………
On Screen Display Menu
Use the OSD menu to access and change the camera’s settings.
Note: Electronic P / T / Z functionality is disabled when the OSD menu is displayed.
The camera OSD Menu offers the following settings options:
•Exposure
oFull Auto
▪ExpCompMode Off On / Off
▪Exp Comp 0-7 ~ +7
Note: Available when ExpCompMode is “On”
▪Gain Limit 60 ~ 15
▪Meter Average Bottom / Average / Top / Center
▪Backlight Off On / Off
▪DRC Strength 50 ~ 8
▪Anti-Flicker 60Hz Off / 50Hz / 60Hz
oShutter Priority
▪Shutter 1/60 1/30s, 1/60s, 1/90s, 1/100s, 1/125s, 1/200s,
1/250s, 1/350s, 1/500s, 1/725s, 1/1000s,
1/1500s, 1/2000s, 1/3000s, 1/4000s,
1/6000s, & 1/10000s
▪Meter Average Bottom / Average / Top / Center
▪DRC Strength 50 ~ 8
oBright
▪Bright 70 ~ 17
▪Gain Limit 60 ~ 15
▪Meter Average Bottom / Average / Top / Center
▪DRC Strength 50 ~ 8
▪Anti-Flicker 60Hz Off / 50Hz / 60Hz
Page 7 of 32
Ver 1.0 2/20
oManual
▪Shutter 1/60 1/30s, 1/60s, 1/90s, 1/100s, 1/125s, 1/200s,
1/250s, 1/350s, 1/500s, 1/725s, 1/1000s,
1/1500s, 1/2000s, 1/3000s, 1/4000s,
1/6000s, & 1/10000s
▪Gain 20 ~ 15
▪DRC Strength 50 ~ 8
•Color
oAuto
▪AWB Sens High Low / Middle / High
▪RG Tuning 0-10 ~ +10
▪BG Tuning 0-10 ~ +10
▪Saturation 100% 60% ~ 200%
▪Hue 70 ~ 14
oIndoor
▪Saturation 100% 60% ~ 200%
▪Hue 70 ~ 14
oOutdoor
▪Saturation 100% 60% ~ 200%
▪Hue 70 ~ 14
oOnePush
▪AWB Sens High High / Low / Normal
▪RG Tuning 0-10 ~ +10
▪BG Tuning 0-10 ~ +10
▪Saturation 100% 60% ~ 200%
▪Hue 70 ~ 14
oManual
▪RG Tuning 226 0 ~ 255
▪BG Tuning 188 0 ~ 255
Page 8 of 32
Ver 1.0 2/20
▪Saturation 100% 60% ~ 200%
▪Hue 70 ~ 14
•Image
▪Luminance 70 ~ 14
▪Contrast 70 ~ 14
▪Sharpness 4Auto / 0 ~ 15
▪Flip-H Off Off / On
▪Flip-V Off Off / On
▪Gamma EXT Default / 0.45 / 0.5 / 0.56 / 0.63
▪Style Default Clarity / Bright / PC / Clarity (LED) / Norm
▪LDC 10 Off / -10 ~ +10
•Noise Reduction
▪2D-NR Close / Auto / 1 ~ 5
▪3D-NR Close / 1 ~ 8
•Setting
▪Language English English, Chinese, Russian, Italian, German,
French, Spanish
▪Protocol VISCA VISCA, PELCO-P, PELCO-D
▪Visca Addr 11 – 7 (VISCA), 0 – 254 (PELCO-P),
0 – 31 (PELCO-D)
▪EPTZ On On / Off
▪Zoom Limit 1x-3x 1x-3x / 1x-4x / 1x-8x / 2x-4x / 2x-8x / 3x-8x
▪Audio In MicIn 16K MicIn 16K
▪AutoFraming Off On / Off
•Information Displays current camera settings
•Restore Default Restore camera default settings
Page 9 of 32
Ver 1.0 2/20
IR Remote Controller…………………………………………………………………………….
Note: IR Remote will not work on other HuddleCamHD cameras
1. Standby Button:
Press this button to enter standby mode. Press it again to
enter normal mode.
NOTE: Power consumption in standby mode is
approximately half of the normal mode.
2. Position Buttons:
To set preset or call preset
3. * (asterisk) Button:
For multiple functions.
4. Preset Button:
Allows for setting a preset
NOTE: [PRESET] + Numeric button (0–9) to set
5. Home Buttons:
Press the Home button to send the camera back to front
6. Return Button:
Press the button to back previous menu
7. Zoom Buttons:
Zoom+: Zoom In (Slow and fast speed)
Zoom-: Zoom Out (Slow and fast speed)
8. L/R Set Button:
Set the left & right direction of the remote control.
(not available on this model)
9. Focus Buttons:
Used for focus adjustment
Press AUTO to adjust the focus on the center of the
object automatically. To adjust the focus manually, press
the MANUAL button, and adjust it with FAR and NEAR.
10. Camera Address Select Buttons:
Camera the button corresponding to the camera which
you want to operate with the remote controller
11. # Button:
For multiple functions
12. Multiple function Buttons:
Function 1. Set camera IR address
Press 3 keys contiguously can set camera IR address as
follow:
[*] + [#] + [F1]: IR Address 1
[*] + [#] + [F2]: IR Address 2
[*] + [#] + [F3]: IR Address 3
[*] + [#] + [F4]: IR Address 4
Function 2. Image freezing function
Press [F4] to start the freeze function. The word “Freeze” displays on the upper left corner. After five seconds, the
display disappears automatically (though the freeze feature continues). To cancel the freeze, press the [F4] key
the word “Unfreeze” displays on the upper left corner. After five seconds, the display disappears automatically.
13. Reset Button:
Clear preset: Erase a preset position [RESET] + numeric button (0-9), or: [*] + [#] + [RESET]: Erase all presets
14. Pan/Tilt Control Buttons:
Allows for electronic Pan/Tilt control
15. Menu Buttons:
Menu Button: Press this button to enter or exit the OSD menu.
16. Backlight Button:
Backlight button: Press this button to enable the backlight compensation. Press it again to disable the backlight
compensation.
Page 10 of 32
Ver 1.0 2/20
NOTE: Only available in manual exposure mode.
NOTE: If there is a light begin the subject, the subject will appear dark. In this case, press the backlight ON/OFF
button. To cancel the function, press the backlight ON/OFF button
17. P/T RST Button:
Press this button to self-calibrate pan & tilt once again.
NOTE: not available on this model
•Shortcuts:
[*] + [#] + [1]: Display OSD menu in English
[*] + [#] + [3]: Display OSD menu in Chinese
[*] + [#] + [4]: Show IP Address
[*] + [#] + [6]: Quickly restore the default settings
[*] + [#] + [8]: Show the camera version
[*] + [#] + [9]: Quickly set mount mode (flip/normal)
[*] + [#] + [MANUAL]: Resets IP information
[#] + [*] + [4]: Toggle between DHCP & Static IP addressing
[#] + [*] + [#] + [1]: Set IP address to 192.168.100.81
[#] + [*] + [#] + [2]: Set IP address to 192.168.100.82
[#] + [*] + [#] + [3]: Set IP address to 192.168.100.83
[#] + [*] + [#] + [4]: Set IP address to 192.168.100.84
[#] + [*] + [#] + [5]: Set IP address to 192.168.100.85
[#] + [*] + [#] + [6]: Set IP address to 192.168.100.86
[#] + [*] + [#] + [7]: Set IP address to 192.168.100.87
[#] + [*] + [#] + [8]: Set IP address to 192.168.100.88
[#] + [*] + [#] + [9]: Set IP address to 192.168.100.89
[#] + [*] + [#] + [0]: Set IP address to 192.168.100.80
Care Of The Unit………………………………………………………………………………….
Remove dust or dirt on the surface of the lens with a blower (commercially available).
Installation Instructions………………………………………………………………………
Monitor Installation…………………………………………………………………………………….
When mounting the HuddleCamHD camera on a monitor, ensure that the mount screw
is fastened tightly to the camera. Use the top mount to rest the camera on a
monitor. Position the bottom mount on the back of the monitor to secure the camera
in position. You can rotate the camera lens as necessary.
Tripod Installation………………………………………………………………………………………
When using the HuddleCamHD camera with a tripod, screw the tripod to the bottom
of the camera. The tripod screw must fit below specifications:
The tripod screw must fit shown specifications:
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere HuddleCamHD Sicherheitskamera Handbücher
HuddleCamHD
HuddleCamHD HC12X-HUDDLEVIEW Bedienungsanleitung
HuddleCamHD
HuddleCamHD 10X-G3 Bedienungsanleitung
HuddleCamHD
HuddleCamHD 10X-G2 Bedienungsanleitung
HuddleCamHD
HuddleCamHD 10X-USB2 Bedienungsanleitung
HuddleCamHD
HuddleCamHD 3X-G2 Bedienungsanleitung
HuddleCamHD
HuddleCamHD HC10X-GY-G2 Bedienungsanleitung
HuddleCamHD
HuddleCamHD HuddleCam-HD 10X Bedienungsanleitung
HuddleCamHD
HuddleCamHD 30X Bedienungsanleitung
HuddleCamHD
HuddleCamHD 3X Bedienungsanleitung
