HumanCentric XT Series Einrichtungshandbuch

Fits VESA patterns 100mm x 100mm and 75mm x 75mm. If your monitor doesn’t have VESA holes, check

www.humancentric.com for an appropriate adapter for your model.

Models 101-3001 (single), 101-3002 (dual)

TOOLS INCLUDED

M6 Large Allen Wrench

XT-Series Monitor Mount

Patented in the US, International Patents Pending

TECHNICAL SPECIFICATIONS

Dual arm socket

Single

Arm

Dual

Arm

9 kg per arm

N/A 100036003600240010500 - 540 mm 0 - 270mm 9 kg

160 mm 3600360024001050

Lift Angle Pivot Swivel Pan Tilt Extension Vertical Max Weight

Load

Monitor Screws (4)

Base and pole Clamp Padding Lower Arm Upper Arm Monitor Bracket

Monitor Screws (8)

Clamp Padding Lower Arms (2) Upper Arms (2) Monitor Brackets (2)

Base and pole

with clip

PARTS INCLUDED

SINGLE ARM

DUAL ARM

COMPATIBLE WITH MODELS

M6 M3

M3 Small Allen Wrench

0 - 21 in 0 - 10.5 in

0 - 540 mm 0 - 270 mm

0 - 21 in 0 - 10.5 in

1000

6.3 in

19.8 lbs

19.8 lbs per arm

2. INSTALL LOWER ARMS

Install and tighten

the adjustable clamp

as shown. Insert the

M3 allen wrench into

the wrench slot.

click!

DUAL MOUNT

SINGLE MOUNT

click!

Place the clamp

padding between

the desk and the

intended clamp

location. For

optional permanent

placement, remove

the adhesive

backing.

Place the clamp

padding between the

desk and the intended

clamp location. For

optional permanent

placement, remove the

adhesive backing.

Desk Thickness: 20 - 110 mm (0.8 - 4.3 in)

GROMMET OPTION

CLAMP OPTION

1. INSTALL BASE

Disassemble clamp

base as shown. Desk Thickness: 20 - 60 mm (0.8 - 2.35 in)

Hole Diameter: 10-60 mm (0.4 - 2.35 in)

2. INSTALL UPPER ARMS 3. INSTALL MONITOR

The black screw goes

toward the bottom of the monitor

Slide the upper arm(s) onto the

lower arm(s) until the lock clicks

into place.

click!

4. ROUTE CABLES WARNING

Without the monitor weight to hold

the spring in place, the monitor arm

could swing upward and cause

personal injury.

Please make sure that the monitor

arm is in the highest possible position

when mounting or removing the

monitor.

To adjust the swing tension of the arms,

tighten or loosen the set screws with the

M3 allen wrench.

5. ADJUSTMENTS

To adjust the tension for the monitor’s tilt

and rotation, tighten or loosen the monitor

bracket tension screw appropriately.

To adjust the spring tension for your

monitor, raise the monitor up to the

highest position and insert the M6 allen

wrench into the gap at the top of the arm.

To increase the tension for heavier

monitors, loosen the screw. To decrease

the tension for lighter monitors, tighten

the screw.

DUAL MOUNT

M6 M3

For heavier monitors, turn

counter-clockwise.

For lighter monitors, turn clockwise.

Dieses Handbuch passt für folgende Modelle

Andere HumanCentric Rack & Stand Handbücher

HumanCentric

HumanCentric 101-1012 Gebrauchsanweisung

HumanCentric

HumanCentric 101-2092 Bedienungsanleitung

HumanCentric

HumanCentric 101-1046-V3 Bedienungsanleitung

HumanCentric

HumanCentric 101-1018 Bedienungsanleitung

HumanCentric

HumanCentric 101-1004 Bedienungs- und Wartungsanleitung

HumanCentric

HumanCentric 101-2060 Bedienungsanleitung

HumanCentric

HumanCentric 101-1009 Bedienungsanleitung

HumanCentric

HumanCentric 101-2082 Bedienungs- und Wartungsanleitung

HumanCentric

HumanCentric 101-2031 Bedienungsanleitung

HumanCentric

HumanCentric 101-2013-WC Bedienungsanleitung

HumanCentric

HumanCentric 101-2013-WC Bedienungsanleitung

HumanCentric

HumanCentric 401-1022 Bedienungsanleitung

HumanCentric

HumanCentric 101-2100 Bedienungsanleitung

HumanCentric

HumanCentric VESA 101-1030 Bedienungsanleitung

HumanCentric

HumanCentric 101-2012 Bedienungsanleitung

HumanCentric

HumanCentric 101-1058 Bedienungsanleitung

HumanCentric

HumanCentric 101-1020 Bedienungsanleitung

HumanCentric

HumanCentric 101-1064 Bedienungsanleitung

HumanCentric

HumanCentric 101-1015-V2 Bedienungsanleitung

HumanCentric

HumanCentric 101-4002 Bedienungsanleitung

HumanCentric

HumanCentric 101-2009 Bedienungsanleitung

HumanCentric

HumanCentric 101-2078 Bedienungs- und Wartungsanleitung

HumanCentric

HumanCentric 101-2095 Bedienungsanleitung

HumanCentric

HumanCentric 101-1005-V4 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung