Hunt CCTV HTP-T13MG28D Bedienungsanleitung
HTP‐T13MG28D
H.264IPDOMECAMERA
UserManualVer.1.0
HTP-T13MG28D User Manual
-1-
Safety Precaution
Make sure to turn off the power before installing HTP-T13MG28D.
Do not install under the direct sunlight or in dusty areas.
Make sure you use the product within the temperature and humidity specified in the specification.
Do not operate the product in the places with vibration or strong magnetic fields.
Do not put electrically conductive materials into the product unless specified in the manual.
Do not open the top cover of the product. It can cause an static shock and damage the
components.
In order to prevent overheating, make sure there is at least 10 cm of space between the wall and
the product.
After checking rated voltage, please connect the power.
We appreciate your purchasing HTP-T13MG28D.
Before installing the product, please read the following with care.
HTP-T13MG28D User Manual
-2-
Table of contents
1. Introduction ...................................................................................................................................... 3
1. About User Manual.................................................................................................................... 3
2. Features .................................................................................................................................... 3
3. Product and Accessories ........................................................................................................... 4
4. Rotation Functions .................................................................................................................... 5
5. System Connections ................................................................................................................. 5
2. Installation ........................................................................................................................................ 7
1. Connecting Network (LAN)........................................................................................................ 7
2. Connecting Audio ...................................................................................................................... 7
3. Connecting Serial Ports............................................................................................................. 7
4. Connecting Sensor & Alarm ...................................................................................................... 7
5. Connecting Power ..................................................................................................................... 8
6. Checking Operating................................................................................................................... 8
3. System Operation............................................................................................................................. 9
1. Remote Video Monitoring ......................................................................................................9
2. Initialization of IP Address ....................................................................................................... 11
4. Remote Configuration..................................................................................................................... 12
1. Using Remote Configuration ................................................................................................... 12
2. HTP-T13MG28D Setup ........................................................................................................... 13
2.1 System ........................................................................................................................... 13
2.2 Video.............................................................................................................................. 15
2.3 Audio .............................................................................................................................. 18
2.4 Network.......................................................................................................................... 19
2.5 Serial Port Configuration ................................................................................................ 22
2.6 Event Configuration........................................................................................................ 24
2.7 Preset............................................................................................................................. 27
2.8 User ............................................................................................................................... 28
2.9 Camera .......................................................................................................................... 30
5. APPENDIX : PoE Specification................................................................................................32
HTP-T13MG28D User Manual
-3-
1. Introduction
1. About User Manual
The User Manual is provided to advise how to use this premium network camera, HTP-T13MG28D. This manual
includes how to trouble shoot in case of problems as well as installation, operation and setting up the HTP-
T13MG28D.
2. Features
HTP-T13MG28D is a 1.3 Megapixel network-based camera with remote live monitoring, audio monitoring and
control via an IP network such as LAN, ADSL/VDSL, and Wireless LAN.
Video
-Highly efficient compression algorithm, H.264 & MJPEG support
-18 kinds of compression and resolutions:
352x240 ~ 1280 x 960
-Wide range of transmission rates: 32kbps ~ 8Mbps
-Various transmission modes: CBR, VBR
-Motion detection
Audio
-Multi-transmission mode: Simplex (HTP-T13MG28D ÆClient PC or Decoder, Client PC or Decoder Æ
HTP-T13MG28D), Full Duplex
Network
-Fixed IP & Dynamic IP (DHCP) support
-1:1, 1:N support
-Multicasting
-Automatic transmit rate control according to network conditions
Serial Data
-RS-485 support
-Data pass-through mode: serial data communications between HTP-T13MG28D and Decoder
HTP-T13MG28D User Manual
-4-
Sensor & Alarm
-Support direct connections of external sensor and alarm devices.
-Event alarm
User Interface
-Diagnose and upgrade through dedicated program called True Manager
-System configuration using Internet Explorer
High Reliability
-Embedded system
-System recovery by dual Watch-dog functions
3. Product and Accessories
HTP-T13MG28D System User Manual
S/W CD
<Picture 1> Package
HTP-T13MG28D User Manual
-5-
4. Rotation Functions
5. System Connections
HTP-T13MG28D IP Cameras can be connected in either 1 to 1 connection where one HTP-T13MG28D is
connected one PC client or a decoder system or 1 to many connections where one HTP-T13MG28D can be
connected several PCs and decoder systems.
Topology
Generally HTP-T13MG28D and a PC or a decoder are connected in a 1 to 1 mode or a 1 to many configuration.
1:1 connection
Camera PC
Site Remote Center
Camera Decoder
Site Remote Center
Decoder Monitor
Remote Center
HTP-T13MG28D User Manual
-6-
One HTP-T13MG28D is installed at a site where video images are transmitted. A PC or a decoder is installed at
a central location to receive and view the video images on an analog monitor. Audio and serial data are
transferredin either direction.
1:N connection
In this configuration, a site can be monitored from many remote central locations. Although up to 64 PCs or
decoders can be connected to on HTP-T13MG28D, in the real network environment, network bandwidth can limit
the maximum connections.
Functionally, the central monitoring system (CMS) software provided can replace the decoder
Multicast
If the network supports multicasting, a large number of decoders can be used to receive video effectively from a
HTP-T13MG28D using a single streaming of video and audio.
Relay
Video and audio can be retransmitted from a center to another center. The arrangement is useful when the
network bandwidth to the site is limited while there are more than one center want to monitor the site.
Camera Decoder
Site Center 1
Decoder
Center 2
Camera PC or Decoder
PC or Decoder
PC or Decoder
Remote Center
Site
HTP-T13MG28D User Manual
-7-
CMS (Central Monitoring System)
CMS is a Window-based remote monitoring program in order to monitor or control video, audio, and events in
real time from several IP cameras or video servers. Please refer to the CMS User Manual for more in detail.
2. Installation
1. Connecting Network (LAN)
- Connect the power adaptor to HTP-T13MG28D
- Connect network cable to Ethernet port.
2. Connecting Audio
Audio is full-duplex. It is possible to set the mode as Tx-only, Rx-only or Tx-Rx.
- Connect audio input and output ports to audio devices accordingly.
- The Audio signal required is line level, so audio equipment with an amp, mixer or other amplifier should be
used.
3. Connecting Serial Ports
RS-485 of HTP-T13MG28D can be connected to external equipment such as PT receiver etc. PC client can
send PT commands to the external equipment via the serial port.
When a decoder system instead of PC client is connected to HTP-T13MG28D, the serial port and that of the
decoder system works in pass-through mode. That is, data from at one port is delivered to the other port, vice
versa .
4. Connecting Sensor & Alarm
Connect sensor and alarm devices to corresponding terminals accordingly
Camera Decoder
Site Remote Center
Camera CMS
CMS
Site Remote Center
HTP-T13MG28D User Manual
-8-
5. Connecting Power
After confirming the power source, connect power adaptor and then 12V DC connector to the system.
6. Checking Operating
Once the power is supplied to the camera, it will start booting.
The system will boot up to an operating mode after approximately 40-60 seconds. The green LED on the
Ethernet port will flash indicating the system is ready.
Software provided on the disc called True Manager allows you to check the IP address and other network details
of the camera. Please refer to the True Manager manual for instructions on how to find the IP address of the
camera and if required changing it.
HTP-T13MG28D User Manual
-9-
3. System Operation
1. Remote Video Monitoring
There are two ways to monitor video when the decoder site and HTP-T13MG28D are connected.
IP address should be correct, please refer to True Manager Manual and Remote Setting in Chapter 5 for
further details.
Video Monitoring via Decoder System
Once the HTP-T13MG28D’s IP address is set in the remote IP address section of the decoder, the decoder
system will connect to the HTP-T13MG28D and start receiving the video images.
Normally, a monitor connected to the decoder will display video images.
Video Monitoring by Internet Explorer
If HTP-T13MG28D’s IP address is entered in to Internet Explorer, the system will ask for confirmation to install
Active-X control. Once authorized, Internet Explorer will start to display video images from the encoder as shown
below.
http://192.168.10.100
Default ID : admin Password : 1234
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Hunt CCTV Sicherheitskamera Handbücher
Hunt CCTV
Hunt CCTV HTZ-1000ISWBH Bedienungsanleitung
Hunt CCTV
Hunt CCTV HTC-15A-24(DN) Bedienungsanleitung
Hunt CCTV
Hunt CCTV HTC-LP112DID Bedienungsanleitung
Hunt CCTV
Hunt CCTV HTP-T3700 Bedienungsanleitung
Hunt CCTV
Hunt CCTV HTC-5AH2810D Bedienungsanleitung
Hunt CCTV
Hunt CCTV HTP-T3MG28L Bedienungsanleitung
Hunt CCTV
Hunt CCTV HNC301-CU Benutzerhandbuch
Hunt CCTV
Hunt CCTV HTC-79C Bedienungsanleitung
Hunt CCTV
Hunt CCTV HNC301-XB Benutzerhandbuch
Hunt CCTV
Hunt CCTV HA0312OCT16 Bedienungsanleitung
