Hunter SVC Bedienungsanleitung

SVC

Smart Valve Controller

Owner’s manual and programming instructions

ENG

ESP Programador Autónomo de Pila

Instrucciones de instalacion y manual del usuario

FR Programmateur Autonome

Guide de l’utilisateur et Instructions d’installation

IT Programmatore per Valvole Intelligente

Guida per l’utente ed istruzioni per l’installazione

DE Das Intelligente Magnetventil-Steuergerät

Hinweise zur installation und bedienungsanleitung

PRT Programador de Válvulas Inteligente

Guia do utilizador e instruções de instalação

ENG

TABLE OF CONTENTS

SVC Features ....................................................................2

SVC Components ..............................................................2

LCD Display .................................................................2

Control Buttons ............................................................3

Connecting the Battery .....................................................4

Attaching Solenoids ..........................................................5

Mounting the SVC ............................................................6

To Mount the SVC to a Valve .........................................6

Valve Box Mounting Method ..........................................6

Stake Mounting Method ................................................7

Connecting A Weather Sensor ...........................................7

Programming ...................................................................8

Setting the Date and Time .............................................8

Setting Watering Start Times .........................................8

Eliminating a Start Time ................................................9

Setting the Run Time (Length of Watering) ....................9

Setting Days to Water ...................................................9

Selecting Specific Days of the Week to Water ................9

Selecting Interval Watering ......................................... 10

Programming Stations to Operate Together

(SVC-200 & SVC-400) ................................................10

System Off .................................................................10

To Activate the Controller from the System

Off Mode ....................................................................11

Programmable Rain Off ...............................................11

Manual Watering ........................................................ 11

To Suspend Manual Watering to All

Stations Operating ......................................................12

To Suspend Manual Watering to Individual

Stations Operating ......................................................12

Battery Life Indicator ......................................................12

Troubleshooting Guide ....................................................13

SVC COMPONENTS

This section provides a brief overview of some of the com-

ponents of the SVC. Each item will be discussed in further

detail later. However, this section can be helpful in getting

acquainted with the different options available.

SVC FEATURES

• Simple push button programming

• Operates up to four valves

• Large Liquid Crystal Display (LCD) with easy to

understand icons

• Operates on a standard 9-volt alkaline battery

• Days-of-the-week water schedule

• Up to nine start times per day

• Run times from 1 minute to 4 hours

• Manual watering

• Low battery status shows status of life of battery

• Rain sensor (or other micro-switch sensor) compatible

• Multiple mounting options

• Non-volatile memory retains all program information

LCD Display

1. Main Display – Indicates all programmed information.

2. Station Number – Indicates the station number

being programmed.

3. Current Time/Day – Icon indicates when current

day and clock are being set.

4. Run Times – Icon indicates when Run Times are

being set. Allows user to set run times from 1 minute to

4 hours.

5. Start Times – Icon indicates when Start Times are

being set.

6. Start Time Number – Indicates the start time number

from 1 to 9.

7. Watering Days – Allows the user to select individual

days to water or a selected number of days between

waterings (interval).

ENG

10 11

8. Rain Drop – Indicates that watering will occur on a

selected day.

9. Crossed Rain Drop – Indicates that watering will not

occur on a selected day.

10. System Off – Indicates that watering is suspended.

11. Calendar – Indicates interval watering sched-

ule is being programmed. Allows the user to program

1 to 31 days between waterings.

12. Battery Status – Indicates the remaining life of the

battery in the SVC.

13. Manual On/Off – Icon indicates when manual

watering is programmed. Allows the user to activate the

station manually.

14. Sensor Interrupted – Icon indicates that the rain

sensor has shut down the system.

15. Watering – Icon indicates that watering is occurring.

Control Buttons

Button – Increases the selected flashing display.

Button – Decreases the selected flashing display.

Button – Selects programming function.

Button – Advances the selected flashing display to the

next item.

Button – Navigates the selected flashing display back to

the previous item.

289

CONNECTING THE BATTERY To Install the Battery

1. Unscrew the rear half of the SVC body to gain access to

the battery compartment.

2. Snap the battery into the battery holder (use a high

quality 9 volt akaline battery).

NOTE: The battery holder is designed so that

the battery can only be inserted one way.

3. Make sure no water is inside the battery compartment.

Screw the SVC body halves together to seal the

compartment.

The SVC uses a standard 9-volt alkaline battery (not

included) to operate the valve and program the controller.

Under normal conditions the battery should provide at least

one full year of service. Use of a 9-volt lithium battery will

extend the service life of the SVC between battery changes

(approximately 3 years).

NOTE: The SVC has non-volatile memory

which allows for the battery to be removed

without losing any program information.

ENG

ATTACHING SOLENOIDS

The SVC-100 is provided with a solenoid attached to

the controller. The SVC-200 and SVC-400 multi-station

controllers will operate up to 2 or 4 solenoids, respectively.

Hunter DC solenoids (P/N 458200) can easily be installed

on all Hunter Plastic Valves. For the SVC-200 & SVC-400,

solenoids must be ordered separately.

NOTE: Must use DC Latching Solenoids.

24VAC Solenoids will not operate with

the SVC.

To Wire DC Solenoids to the SVC

1. Attach the black leads from each solenoid to the single

common wire (black lead) coming from the SVC. Secure

all wire connections with waterproof connectors.

2. Attach one red wire from each solenoid to the cor-

responding station wire (red lead) from the SVC. The

station numbers are identified on the face of the SVC.

Secure all wire connections with waterproof connectors.

NOTE: The maximum wire distance between

the solenoid and SVC is 100 feet (18 gauge

minimum wire size).

The SVC can also operate non-Hunter DC latching sole-

noids. Below is a list of SVC compatible solenoids.

Model Solenoid

Baccara G75-0-1002

Bermad S392-2

Nelson 8090

Rain Bird TBOSPSOL

Station Wire (Red Leads)

Common Wire (Black Leads)

MOUNTING THE SVC

The SVC can easily be mounted on any Hunter plastic valve.

A specially designed valve mounting clip makes installation

a snap. A protective rubber cover is provided to prevent dirt

from accumulating on the face of the SVC.

To Mount the SVC to a Valve (Figure 1)

1. Unscrew the existing solenoid from the valve.

2. Screw the Hunter DC latching solenoid (P/N 458200)

into the valve bonnet.

3. Attach the large end of the valve mounting clip to the

middle of the SVC body.

4. Snap the small end of the valve mounting clip to

the solenoid.

Mounting Clip

Mounting

Adapter

Along with the universal mounting clip, a mounting adapter

is also provided with the SVC. This mounting adapter

allows for alternate methods of mounting the controller

either to the side of the valve box or stake mounted within

the valve box.

Valve Box Mounting Method (Figure 2)

1. Position the universal mounting adapter on the side of

the valve box. Make sure that the bracket is positioned

so that the controller will not interfere with the valve

box cover when closed.

2. Drive two screws to secure the adapter to the side of

the valve box.

3. Attach the SVC to the mounting clip and slide it on the

end of the mounting adapter.

Figure 1 Figure 2

ENG

Stake Mounting Method (Figure 3)

The universal mounting adapter can also be used to stake

mount the SVC.

1. Cut a section of ½" diameter plastic pipe.

2. Drive the pipe into the ground inside the valve box to

the desired height of the controller.

3. Slip the mounting adapter on top of the pipe.

4. Attached the SVC to the mounting clip and slide onto

the adapter.

A Hunter Mini-Clik® rain sensor can be connected to the

SVC. The purpose of this sensor is to stop watering when

weather conditions dictate.

NOTE: When the Rain Sensor is interrupt-

ing the watering, the display will show the

System Off icon , “OFF” and on

the display.

1. Cut the yellow wire loop attached to the SVC at approxi-

mately the middle of the loop.

2. Remove approximately ½" (13mm) of insulation from

each wire. Attach one yellow wire to each of the wires

of the weather sensor. You can mount the rain sensor

up to 100 feet from the SVC controller (18 GA minimum

wire size).

3. Secure wire connec-

tions with waterproof

connectors.

Mounting Clip

Mounting

Adapter

Plastic Pipe

Figure 3

CONNECTING A WEATHER SENSOR

Hunter Model Mini-Clik®

The SVC utilizes independent station programming.

For each station being programmed, you need to program

at least one Start Time, a Run Time, and Water Day(s).

The button allows you to quickly navigate among

programming options.

The SVC display shows time and day when the button

is pressed. The button allows you to easily navigate

among programming options. During a short period of

inactivity, the display will shut off to retain battery power.

When programming, the flashing portion of the display can

be changed by pressing the or buttons. To change

something that is not flashing, press the or buttons

until the desired item is flashing.

The SVC allows for up to 9 start times per day. Multiple

start times permit morning, afternoon, and evening water-

ing, perfect for the establishment of new lawns and thirsty

annual flowers. Simply designate the days of the week you

want to water. The SVC makes it easy.

Setting the Date and Time

1. Press the button until the Current Time/Day icon

is displayed.

2. Hours will be flashing. Press the or button to

change the hour shown on the display. Press the to

proceed to setting the minutes.

3. Minutes will be flashing. Use the or button to

change the minutes shown on the display. Press the

to proceed to select AM, PM, or 24 hour time.

4. The time will be displayed, and the time of day flashing.

Press the or button to select AM, PM, or 24 hour.

Press the to proceed to setting the day of the week.

5. The number 1 will be flashing at the bottom of the

display, indicating the first day of the week. Press

the or buttons to select the day of the week

(1 through 7) corresponding to the day.

The time and day have now been set.

Setting Watering Start Times

1. Push the button until the Start Times icon is

displayed. A Start Time or “Off” will be flashing. The

number directly to the left of the start time number

(1 through 9) indicates the start time number. The

number directly below the start time number indicates

the station being programmed.

2. Use the or button to change the start time.

(The start times advance in 5 minute increments.)

PROGRAMMING

Inhaltsverzeichnis

Andere Hunter Controller Handbücher

Hunter

Hunter XC Hybrid Betriebsanleitung

Hunter

Hunter Hydrawise HC-1200M Bedienungsanleitung

Hunter

Hunter X2-400 Betriebsanleitung

Hunter

Hunter Hydrawise Pro-HC Bedienungsanleitung

Hunter

Hunter Pro-C Bedienungsanleitung

Hunter

Hunter EC Bedienungsanleitung

Hunter

Hunter ACC Bedienungsanleitung

Hunter

Hunter X-CORE Betriebsanleitung

Hunter

Hunter ACC-1200 Bedienungsanleitung

Hunter

Hunter Hydrawise HC-1200M Montageanleitung

Hunter

Hunter Smart Valve Controller Betriebsanleitung

Hunter

Hunter Eco-Logic 6 Betriebsanleitung

Hunter

Hunter 27206 Bedienungsanleitung

Hunter

Hunter SVC-400 Bedienungsanleitung

Hunter

Hunter Hydrawise HC-1200M Bedienungsanleitung

Hunter

Hunter SRC Plus Installations- und Betriebshandbuch

Hunter

Hunter Hydrawise HPC Bedienungsanleitung

Hunter

Hunter Genesis Bedienungsanleitung

Hunter

Hunter X-CORE XC-2 Bedienungsanleitung

Hunter

Hunter ICC-800PL Betriebsanleitung

Hunter

Hunter ICC2 Bedienungsanleitung

Hunter

Hunter Pro-C Betriebsanleitung

Hunter

Hunter PRO-C Hydrawise Stücklistenhandbuch

Hunter

Hunter i-core IC-600PL Betriebsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch