Hunter 41545 Bedienungsanleitung

41545-01 6/10/2002

Installation and Operation Manual

For Hunter Ceiling Fans

41545-01 6/10/2002

CONGRATULATIONS!

Your new Hunter ceiling fan is an

addition to your home or office that

will provide comfort and perfor-

mance for many years. This manual

gives you complete instructions for

installing and operating your fan.

We are proud of our work. We ap-

preciate the opportunity to supply

you with the best ceiling fan avail-

able anywhere in the world.

Before installing your fan, record the

following information for your

records and warranty assistance.

Please refer to the carton and the

Hunter nameplate (located on top

outside fan motor housing) for the

proper information.

6/2002

Model Name __________________

Catalog No. ___________________

Serial No. _____________________

Date Purchased ________________

Where Purchased ______________

_____________________________

Attach Your Receipt

or a Copy of

Your Receipt Here

41545-01 6/10/2002

CONTENTS

CONGRATULATIONS! ......................................................................................................................................... 3

IMPORTANT INFORMATION ................................................................................................................................ 5

STEP 1 - GETTING READY ................................................................................................................................... 6

STEP 2 - INSTALLING THE CEILING PLATE ............................................................................................................ 8

STEP 3 - ASSEMBLING HOUSINGS..................................................................................................................... 10

STEP 4 - ASSEMBLING THE FAN ........................................................................................................................ 11

STEP 5 - WIRING THE FAN ................................................................................................................................ 13

STEP 6 - HANGING THE FAN ............................................................................................................................. 15

STEP 7 - ASSEMBLING FAN BLADES .................................................................................................................. 16

STEP 8 - ATTACHING THE SWITCH HOUSING ................................................................................................... 18

STEP 9 - INSTALLING LIGHT FIXTURE ................................................................................................................. 20

OPERATING YOUR HUNTER FAN ....................................................................................................................... 21

CLEANING AND MAINTENANCE ....................................................................................................................... 23

TROUBLESHOOTING ......................................................................................................................................... 24

41545-01 6/10/2002

IMPORTANT INFORMATION

not lock the circuit breakers

in the off position, securely

fasten a prominent warning

device, such as a tag, to the

service panel.

• All wiring must be in accor-

dance with national and lo-

cal electrical codes and

ANSI/NFPA 70. If you are

unfamiliar with wiring, you

should use a qualified elec-

trician.

• To reduce the risk of per-

sonal injury, do not bend

the blade attachment sys-

tem when installing, bal-

ancing, or cleaning the fan.

Never insert foreign objects

between rotating fan

blades.

DO YOU NEED HELP?

To install a ceiling fan, be sure you

can do the following:

• Locate ceiling joist or other suit-

able support in ceiling.

• Drill holes for and install wood

screws.

• Identify and connect electrical

wires.

• Lift 40 pounds.

If you need help installing the fan,

your Hunter fan dealer can direct you

to a licensed installer or electrician.

• To reduce the risk of fire, elec-

trical shock, or motor dam-

age, do not use a solid-state

speed control with this fan.

Use only Hunter speed con-

trols.

WARNINGS

• To avoid possible electrical

shock, before installing

your fan, disconnect the

power by turning off the

circuit breakers to the out-

let box and associated wall

switch location. If you can-

CAUTIONS

• Read entire booklet carefully

before beginning installation

and save these instructions.

• To reduce the risk of personal

injury, attach the fan directly

to the support structure of the

building according to these in-

structions, and use only the

hardware supplied.

41545-01 6/10/2002

GATHERING THE TOOLS

You will need the following tools for

installing the fan:

• Electric drill with 9/64" bit

• Standard screwdriver

• Phillips-head screwdriver

• Wrench or pliers

OPTIONAL ACCESSORIES

Consider using Hunter’s optional ac-

cessories, including a wall-mounted

or remote speed control. To install and

use the accessories, follow the instruc-

tions included with each product.

For quiet and optimum performance

of your Hunter fan, use only Hunter

speed controls.

STEP 1 - GETTING READY

PREPARING THE FAN SITE

The location of a ceiling fan and how

the fan is attached to the building

structure are essential for reliable

operation, maximum efficiency, and

energy savings. For this reason, we

have included a separate booklet —

“Guide to Choosing and Preparing

a Ceiling Fan Site” — to help you

select the best location for your fan.

The booklet also provides informa-

tion to ensure your fan support and

electric outlet box meet UL-approved

safety codes for ceiling fans.

The instructions in this installation

manual assume that you have used

“Guide to Choosing and Preparing

a Ceiling Fan Site” to pick the fan

location and make certain the proper

fan support and outlet box are in-

stalled.

CHECKING YOUR FAN PARTS

Carefully unpack your fan to avoid

damage to the fan parts. Check for

any shipping damage to the motor

or fan blades. If one of the fan blades

was damaged in shipment, return all

the blades for replacement.

Hint: If you are installing more than

one fan, keep the fan blades

in sets, as they were shipped.

The fan includes a separate diagram

of the screws and other small parts

needed for the fan. Keep this dia-

gram handy for identifying parts dur-

ing installation; the diagram indicates

the step in which each part is used.

If any parts are missing or damaged,

contact your Hunter dealer or call

Hunter Parts Department at

901-248-2222.

41545-01 6/10/2002

INSTALLER’S CHOICE®

This patented 3-position mounting

system provides you maximum instal-

lation flexibility and ease. You can

install your Hunter fan in one of three

ways. The steps in this manual in-

clude specific instructions for the fan

mounting method of your choice. For

a ceiling 8 feet or higher, standard

mounting is recommended.

Flush Mounting (Figure 1a) fits close

to the ceiling, for low ceilings less

than 8 feet high.

Standard Mounting (Figure 1b) hangs

from the ceiling by a connector pipe

(included), for ceilings 8 feet or

higher. For ceilings higher than eight

feet, you can purchase Hunter ex-

tension rods. All Hunter fans use

sturdy 3/4" diameter pipe to assure

stability and wobble-free perfor-

mance.

Angle Mounting (Figure 1c) hangs

from a vaulted or angled ceiling.

Figure 1c - Angle Mounting

Figure 1b - Standard Mounting

Figure 1a - Flush Mounting

10"

12"

34°Max

Pitch

41545-01 6/10/2002

STEP 2 - INSTALLING THE CEILING PLATE

4. Align the slotted holes in the ceil-

ing plate with the pilot holes in

the wood support structure.

Note: The isolation pads should

be flush against the ceiling.

1. Drill two pilot holes into the wood

support structure through the

outermost holes on the outlet

box. The pilot holes should be

9/64" in diameter.

2. Thread the lead wires from the

outlet box through the hole in the

middle of the ceiling plate.

3. Your fan comes with two neo-

prene noise isolators. Position the

isolators between the ceiling plate

and ceiling by inserting the raised

areas on each isolator into the

holes in the ceiling plate. Refer to

Figure 2a.

Figure 2a - Adding Isolators to Ceiling

Plate

Figure 2b - Correct Position of Ceiling

Plate for Angle Mounting

Ceiling Plate

Hooks

Isolators

Ceiling

Plate

For Angle Mounting Only: Be

sure to orient the ceiling plate so

that the two hooks point up to-

wards the ceiling peak as shown

in Figure 2b. Note: You will use

the hooks to support the fan dur-

ing STEP 5 - WIRING THE FAN.

41545-01 6/10/2002

Figure 2c - Attaching Ceiling Plate to

2 x 4 Brace

Ceiling Joist

Ceiling

Outlet Box

Ceiling

Plate

Flat

Washer 3" Wood

Screw

5. Place a flat washer on each of the

two 3" screws and pass the

screws through the slotted holes

in the ceiling plate as shown in

Figure 2c.

6. Tighten the screws into the 9/64"

pilot holes; do not use lubricants

on the screws. Do not over-

tighten.

41545-01 6/10/2002

Some fans are shipped with the

decorative upper and lower housings

detached from the fan motor. This

step tells you how to attach the hous-

ing. If the housing for your fan is al-

ready attached to the fan motor, go

directly to STEP 4 - ASSEMBLING THE

FAN.

1. Fit the upper fan housing on the

motor hanger adapter. Make sure

the tabs in the motor hanger

adapter fit into the notches in the

upper housing as shown in Fig-

ure 3a.

2. Attach the upper fan housing to

the motor hanger adapter with

three 1/2" screws and lockwash-

ers as shown in Figure 3b.

STEP 3 - ASSEMBLING HOUSINGS

3. Attach the bottom cover to the

upper fan housing with thrubolts

and acorn nuts as shown in Fig-

ure 3b, or with #6-32 screws and

lockwashers as shown in Figure

3c – depending upon style of fan.

Motor Hanger

Adaptor

Upper Fan

Housing Acorn Nut

Washer

Thrubolt

Bottom Cover

Upper Fan

Housing

Bottom Cover

#6-32 Screw

with Lockwasher

Figure 3b - Assembling and Attaching

Housings to Motor Hanger Adapter

Figure 3c - Attaching Bottom Cover to

Upper Fan Housing

Figure 3a - Motor Hanger Adapter

Tabs and Upper Housing Notches

Upper Housing

Notches

Motor Hanger

Adaptor Tab

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hunter Lüfter Handbücher

Hunter

Hunter 42027-01 Bedienungsanleitung

Hunter

Hunter Hunter Ceiling fans Bedienungsanleitung

Hunter

Hunter Hunter Ceiling fans Bedienungsanleitung

Hunter

Hunter 51379 Bedienungsanleitung

Hunter

Hunter 5XXXX series Bedienungsanleitung

Hunter

Hunter 23898 Betriebsanleitung

Hunter

Hunter 42693-01 Gebrauchsanweisung

Hunter

Hunter 21361 Service-Handbuch

Hunter

Hunter 82022 Bedienungsanleitung

Hunter

Hunter Hunter Ceiling Fan Bedienungsanleitung

Hunter

Hunter 21958 Bedienungsanleitung

Hunter

Hunter Donegan 50274 Bedienungsanleitung

Hunter

Hunter Coral Gables II Bedienungsanleitung

Hunter

Hunter Ellipse 90063 Bedienungsanleitung

Hunter

Hunter 23860 Handbuch

Hunter

Hunter Norden Bedienungsanleitung

Hunter

Hunter Neutron Bedienungsanleitung

Hunter

Hunter Eurus Bedienungsanleitung

Hunter

Hunter 20510 Handbuch

Hunter

Hunter 42015-01 Bedienungsanleitung

Hunter

Hunter Ananova Bedienungsanleitung

Hunter

Hunter Studio Series Gebrauchsanweisung

Hunter

Hunter 20543 Handbuch

Hunter

Hunter 21571 Handbuch

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Hinkley

Hinkley HIGHLAND Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung

Lindab

Lindab LTDF Bedienungsanleitung