Hunter Carera Bedienungsanleitung
1
41419-01 10/29/2002
®
Installation and Operation Manual
For Hunter Ceiling Fans
41419-01 10/29/2002
241419-01 10/29/2002
®
3
41419-01 10/29/2002
®
CONGRATULATIONS!
Your new Hunter ceiling fan is an
addition to your home or office that
will provide comfort and perfor-
mance for many years. This manual
gives you complete instructions for
installing and operating your fan.
We are proud of our work. We ap-
preciate the opportunity to supply
you with the best ceiling fan avail-
able anywhere in the world.
Before installing your fan, record the
following information for your
records and warranty assistance.
Please refer to the carton and the
Hunter nameplate (located on top
outside fan motor housing) for the
proper information.
© 2002 Hunter Fan Co.
10/29/2002
Model Name __________________
Catalog No. ___________________
Serial No. _____________________
Date Purchased ________________
Where Purchased ______________
_____________________________
Attach Your Receipt
or a Copy of
Your Receipt Here
441419-01 10/29/2002
®
CONTENTS
ImportantInformation.....................................................................................................................................5
Step 1 - Getting Ready .....................................................................................................................................6
Step 2 - Installing the Ceiling Plate .................................................................................................................8
Step 3 - Assembling the Fan........................................................................................................................... 11
Step 4 - Wiring the Fan .................................................................................................................................. 14
Step 5 - Installing the Canopy........................................................................................................................ 17
Step 6 - Assembling Fan Blades...................................................................................................................... 18
Step 7 - Installing the Light Bulbs ................................................................................................................. 20
OperatingYourHunterFan ........................................................................................................................... 21
CleaningandMaintenance ............................................................................................................................ 22
Troubleshooting ............................................................................................................................................. 23
5
41419-01 10/29/2002
®
IMPORTANT INFORMATION
not lock the circuit break-
ers in the off position, se-
curely fasten a prominent
warning device, such as a
tag, to the service panel.
• All wiring must be in accor-
dancewithnationalandlo-
cal electrical codes. If you
are unfamiliar with wiring,
you should use a qualified
electrician.
• To reduce the risk of per-
sonal injury, do not bend
the blade attachment sys-
tem when installing, bal-
ancing,or cleaning the fan.
Neverinsertforeignobjects
between rotating fan
blades.
• The fan blades cannot be
placed lower than 2,3m
from the floor.
DO YOU NEED HELP?
To install a ceiling fan, be sure you
can do the following:
• Locate ceiling joist or other
suitable support in ceiling.
• Drillholes for and install wood
screws.
• Identify and connect electrical
wires.
• Lift 16 kg.
If you need help installing the fan,
yourHunterfandealercandirect you
to a licensed installer or electrician.
• The installation site must
haveanall-pole switch with
a minimum separation gap
of 3 mm.
WARNINGS
• To avoid possible electrical
shock, before installing
your fan, disconnect the
power by turning off the
circuit breakers to the out-
let box and associated wall
switch location. If you can-
CAUTIONS
• Read entire booklet care-
fully before beginning in-
stallation and save these
instructions.
• To reduce the risk of per-
sonal injury, attach the fan
directly to the support
structureofthe building ac-
cording to these instruc-
tions, and use only the
hardware supplied.
641419-01 10/29/2002
®
GATHERING THE TOOLS
You need the following tools to in-
stall the fan:
• Electric drill with 9/64" bit and
masonry bit
• Standard screwdriver
• Phillips-head screwdriver
• Wrench or pliers
• Two M5 x 30 mm expansion an-
chors (for concrete ceilings only)
OPTIONAL ACCESSORIES
Consider using Hunter’s optional ac-
cessories, such as a wall-mounted or
remote speed control. Follow the in-
structions for installation and use in-
cluded with each Hunter accessory.
Forquiet and optimum performance
of your Hunter fan, use only Hunter
speed controls.
STEP 1 - GETTING READY
PREPARING THE FAN SITE
Reliable operation, efficiency, and
maximum energy savings depend
upon proper placement and attach-
ment of the fan. For this reason, we
have included a separate booklet —
“Guide to Choosing and Preparing
a Ceiling Fan Site” — to help you
select the best location for your fan.
The booklet also provides informa-
tion to ensure your fan support and
electricoutletboxmeetUL-approved
safety codes for ceiling fans.
The instructions in this installation
manual assume that you have used
the “Guide to Choosing and Prepar-
ing a Ceiling Fan Site” to pick the
fan location and make certain the
proper fan support and outlet box
are installed.
CHECKING YOUR FAN PARTS
Carefully unpack your fan parts to
avoid damage. Check for shipping
damage. If one of the fan blades is
damaged, return all blades for re-
placement.
Hint: Ifinstallingmorethan one fan,
keep the fan blades in sets, as
shipped.
7
41419-01 10/29/2002
®
Flush Mounting (Figure1a) fits close
to the ceiling, for low ceilings less
than 2,6 m high.
Figure 1c - Angle Mounting
Figure 1b - Standard Mounting
Figure 1a - Flush Mounting
25,5 cm
30,5 cm
34
12
8
Standard Mounting (Figure 1b)
hangs from the ceiling by a connec-
torpipe (included), for ceilings 2,6 m
orhigher. For ceilings higherthan2,6
m, you can also purchase Hunter ex-
tension rods. All Hunter fans use
sturdy 2 cm inner diameter pipe to
assure stability and wobble-free per-
formance.
Angle Mounting (Figure1c)hangs
from a vaulted or angled ceiling.
841419-01 10/29/2002
®
STEP 2 - INSTALLING THE CEILING PLATE
1. Drill two pilot holes into the
wood support structure through
the outermost holes on the out-
let box. The pilot holes should be
9/64" in diameter and 4 1/4"
(110mm) apart. See Figure 2a.
2. Insert the 3 rubber isolators into
the 3 round holes in the ceiling
plate as shown in Figure 2b.
Thread the lead wires from the
outlet box through the opening
in the middle of the ceiling plate.
3. Align two opposing oval slots in
the ceiling plate with the pilot
holes in the wood support struc-
ture. See Figure 2b.
ANGLE MOUNTING
For Angle Mounting be sure to orient
the Ceiling Plate so that the arrows
marked on the plate are pointing to-
wards the ceiling peak. See Figure 2b.
Figure 2a - Pilot Holes and Outlet Box
location
40mm x 80mm
Brace
Outlet Box
Lead Wires Pilot Holes
4. Place a flat washer on each of the
two3" wood screws and pass the
screws through two opposing
oval slots in the ceiling plate, as
shown in Figure 2c.You may sub-
stitute the 3" wood screws with
the provided 1 1/2" wood screws
for shorter depth installations.
Besurethatenoughofthe screws
enters the mounting surface to
support the assembled fan.
WARNING
• To avoid possible electrical
shock, before wiring fan,
disconnect power by turn-
ing off the circuit breakers
both to the outlet box and
toits associated wall switch
location. If you cannot lock
the circuit breakers in the
offposition, securely fasten
a prominent warning de-
vice, such as a tag, to the
service panel.
• All wiring must be in accor-
dance with national and
local electrical codes. If you
are unfamiliar with wiring,
you should use a qualified
electrician.
9
41419-01 10/29/2002
®
Figure 2c - Attaching Ceiling Plate to
40 mm x 80 mm Brace
Rubber
Isolators (4)
Outlet
Box
Ceiling
Plate
Flat Washer 3" Wood
Screw (3)
40mm x 80mm
Brace
Note: You must purchase the ex-
pansion anchors separately. Drill
the holes in the ceiling to the
depth and diameter recom-
mended by the manufacturer of
theexpansion anchors.
2. Drill two holes 110 mm (4,32")
apart on either side of the mains
as shown in Figure 2d. The holes
are for M5 x 30 mm expansion
anchors.
3. Drive the expansion anchors into
theholes until the ends of the an-
chors are flush with the ceiling.
See Figure 2e.
5. Tighten the screws into the 9/64"
pilot holes.
Note: The rubber isolators in the
ceiling plate should be compressed
against the ceiling. Do not over-
tighten.
FOR CONCRETE CEILINGS
1. Locatethe electrical supply mains
in the ceiling.
110 mm
Electrical Mains
Ceiling
Masonry Bit
Figure 2d - Drilling Anchor Holes
4. Hold the Ceiling Plate up to the
ceiling and align two opposing
oval slots in the Ceiling Plate with
the expansion anchors. See Fig-
ure 2b. Be sure that the electrical
mains protrude through the cen-
ter opening in the Ceiling Plate
by at least 150 mm. continued
Figure 2b - Correct Position of Ceiling
Plate for Angle Mounting and location
of rubber isolators.
Rubber
Isolators (3)
Arrows
toward
ceiling
peak
Oval slots for
attaching ceiling
plate to ceiling
10 41419-01 10/29/2002
®
Figure 2f - Attaching Ceiling Plate to
Ceiling
M5 x 30 mm Screw (2)
(supplied with anchor)
Ceiling
Plate Rubber
Isolators
(3)
5. Drive the M5 x 30 mm screws
into the anchors so that the Ceil-
ing Plate is tight against the ceil-
ing. See Figure 2f.
Note: The rubber isolators in the
Ceiling Plate should be com-
pressedagainstthe ceiling. Donot
overtighten.
Figure 2e - Driving Expansion Anchors
into Holes
Expansion
Anchor Flush With
Ceiling
Inhaltsverzeichnis
Andere Hunter Lüfter Handbücher
Hunter
Hunter Norway 20490 Gebrauchsanweisung
Hunter
Hunter Hunter Ceiling Fan Gebrauchsanweisung
Hunter
Hunter 97316 Bedienungsanleitung
Hunter
Hunter Seawave Bedienungsanleitung
Hunter
Hunter Raefield Gebrauchsanweisung
Hunter
Hunter 25120 Handbuch
Hunter
Hunter Italian Countryside Gebrauchsanweisung
Hunter
Hunter 52387 Bedienungsanleitung
Hunter
Hunter T Gebrauchsanweisung
Hunter
Hunter M3586-01 Bedienungsanleitung
Hunter
Hunter 42783-01 Gebrauchsanweisung
Hunter
Hunter 45039-01 Gebrauchsanweisung
Hunter
Hunter 51481 Bedienungsanleitung
Hunter
Hunter 23683 Bedienungsanleitung
Hunter
Hunter 20432 Handbuch
Hunter
Hunter Type 3 Models Bedienungsanleitung
Hunter
Hunter 20168 Gebrauchsanweisung
Hunter
Hunter Highbury Gebrauchsanweisung
Hunter
Hunter 45065-01 Gebrauchsanweisung
Hunter
Hunter 85095 Bedienungsanleitung
