Hunter Caribbean Breeze 54095 Bedienungsanleitung

Installation Manual

Model: 54094 Textured White

54095 Weathered Bronze

Fan weight ±2 lbs: 28.1 lbs (13 kg)

Caribbean Breeze

PG3763 r040419

Ladder

9/64” Drill BitDrill

Screwdriver

Pliers Wire Strippers

OPTIONAL

Congratulations on purchasing your new Hunter®ceiling fan!

Here are the tools you’ll need to complete your installation:

The ceiling fan you purchased will provide comfort and performance in your home or ofce for many years. This

instruction manual contains complete instructions for installing and operating your fan. We are proud of our work and

appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world.

We are here to help!

This Instruction Manual is designed to make installation as simple as possible. While working through this Instruction

Manual, keep your smartphone or tablet nearby. We have added video links to help you through the more technical

sections. If you are unfamiliar or uncomfortable with wiring, contact a qualied electrician. We also provide telephone

support at 1.888.830.1326 or visit us at HunterFan.com.

WARNING

This product conforms to UL Standard 507.

READ and SAVE These Instructions

Warning

w.1 - To reduce the risk of re, electrical shock, or personal injury, mount fan directly from building structure and/or an outlet box marked acceptable for fan support of 70 lbs (31.8 kg) and use the

mounting screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you

cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.

w.3 – To reduce the risk of electric shock, this fan must be installed with an isolating wall control/switch.

w.4 - To reduce the risk of personal injury, do not bend the blade brackets when installing the blade brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between

rotating fan blades.

Caution

c.1 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualied electrician.

c.2 - Use only Hunter replacement parts.

If mounting to a support structure, you will also need these tools.

PB 2

1886

Do not discard the hardware bags or mix parts from

different bags. Make note of the symbol printed on

each hardware bag. The symbols can be used to

identify the appropriate hardware for each step.

x15 x15

For installing the hanger bracket and wiring the fan

For installing the blades

For installing the canopy

For installing the light xture

Hunter Pro Tip:

Find a part that is missing or damaged?

Don’t take it back to the store. Let us make it right. Visit us at HunterFan.com or call us at 1.888.830.1326.

Spare Parts

For your convenience,

you may receive extra fasteners. Pullchains and extra downrod

Remove the shipping blocks from the

motor. Save the screws. They will be

needed for blade iron installation.

Note: Some fans will have a shipping

ring instead of shipping blocks. Please

remove the ring and save the screws.

IMPORTANT

Bulb

Glass

Globe Retainer

Finial Cap

Finial

Lower Switch Housing

Upper Switch Housing

Motor

Downrod

Blade Arm

Blade

Canopy Canopy Screw

Blade Screw

Grommet

Ceiling Bracket

Wood Screw

WIre Nut

Washer

Blade Arm Screw

x10

Light Kit Screws

Fan style may vary.

Note:

M0216-01 r042018

We recommend that you pull everything out of the box and lay it out. We have

grouped the drawn components below with the hardware you’ll need for those

parts. The screws below are drawn to scale to make it easier to identify what

piece of hardware is needed to install each component.

Here is what comes in your box:

1886

Choosing the Right Installation Location

Checking the Ceiling Angle:

Angled Mounting

You probably bought this fan with a location in mind. Let’s check below to make sure it is a good t.

If you have an angled or vaulted ceiling:

1. You will need a longer downrod. (sold separately at HunterFan.com)

2. If your ceiling angle is greater than 34°, you will also need an

Angled Mounting Kit. (Sold separately at HunterFan.com)

Check the room dimensions: Check the outlet box:

You must be able to

secure the fan to building

structure or fan-rated

outlet box.

30 inches

from blade tip to

nearest wall or

obstruction 7 feet

from bottom edge

of blade to the

oor

Support

Structure

Ceiling

Outlet Box

(required)

Angled Mounting

If you have a at ceiling:

Hang your fan by a standard downrod. Some fans come

with a shorter downrod for a Low Prole installation.

Support Structure

Ceiling

Outlet Box

(required)

Standard Mounting

A little more information on Angled Mounting:

For optimum performance and appearance, a longer downrod should

be used with your Hunter ceiling fan when installing on high or angled

ceiling. If your ceiling is angled greater than 34°you will also need an

Angled Mounting Kit. Longer downrods and the Angled Mounting Kit are

sold separately at HunterFan.com.

Determining if you need an Angled Mounting Kit:

Fold on the dotted line. Place against edge againts

the wall. Slide towards the ceiling.

If the guide touches the wall but not the ceiling, you

need an angled mounting kit.

Hunter Pro Tip:

CEILING

WALL

34°

Installing the Ceiling Bracket

Installing the Downrod

1886

Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Glass/Bulbs

Check the outlet box:

Installing the Ceiling Bracket

Installing the Downrod

Follow below if you are using the downrod that came pre-assembled in your box. Need to

install a longer or shorter downrod? Check out the guide at the end of this manual.

Use wood screws and

washers (included) when

securing to support structure

with approved electrical

outlet box. Drill 9/64” pilot

holes in support structure

to aid in securing ceiling

bracket with hardware found

in the hardware bag.

Use machine screws

(provided with outlet box)

and washers when securing

to existing ceiling fan-rated

outlet box. Make sure it is

securely installed and is

acceptable for fan support of

31.8 kg (70 lbs) or less.

Option 2:

Wood Screws

Option 1:

Machine Screws

OFF

Turn Power

Do this rst!

The machine screws are the ones

that came with your outlet box.

Hunter Pro Tip:

8”

3/8”

(not to scale)

Pass all wires to one side of horizontal

bar in downrod assembly. Hand tighten

the downrod (at least 4–5 full turns)

until it stops. Trim the wires coming

from the fan so that 8-inches remain

coming from the top of the downrod.

Tighten the setscrew

with pliers. DO NOT

HAND TIGHTEN.

For angled ceilings,

point opening

toward peak.

ANGLED

MOUNTING TIP

STEP

Wood Screw

Washer

Hunter Pro Tip:

The ground wire attached to the

downrod is approximately 8 inches.

You have two options for installation. Pick which one works best for your location. Remove any existing

bracket prior to installation. Only use the provided Hunter ceiling bracket that came in your fan’s box.

WARNING

FAN FALL HAZARD

To prevent SERIOUS INJURY or DEATH:

• ALWAYS tighten setscrew with pliers.

• DO NOT hand tighten setscrew.

• CHECK the setscrew is tight using pliers

each time you change fan direction.

Remove the pre-installed

setscrew so that the

downrod can be inserted.

1886

Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Glass/Bulbs

Hanging the Fan

Progress Check:

Your fan should look like this.

Wiring the Fan

Place the downrod ball into

the slot in the ceiling bracket.

NOTICE

To prevent damage to fan,

ALWAYS lift holding either the

fan housing or the downrod.

1886

Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Glass/Bulbs

Wiring the Fan

We know wiring is hard. Let’s make it easier.

You are going to need these:

4 Wire Nuts (these are in the bag)

Follow these steps to get your fan wired quickly and safely. Follow the route below that best matches your wall switch

setup. If you are unfamiliar with wiring or uncomfortable doing it yourself, please contact a qualied electrician.

Have a single switch?

Follow these steps:

Have dual switches?

Follow these steps:

Have extra wiring?

Turn the wires upward and push them carefully back through

the hanger bracket into the outlet box. Make sure that the

wires are still attached to the wire nuts.

Hunter Pro Tip:

Here is how to connect the wires:

Push the bare metal ends of the wires together and slide a wire

nut over them. Then, twist the wire nut clockwise until tight.

Give it a gentle pull to make sure none of the wires are loose.

Connect the white

(grounded) wire

from the ceiling

to the white wire

from the fan.

Connect the white

(grounded) wire

from the ceiling

to the white wire

from the fan.

Connect the second ungrounded

(light) wire from the ceiling to

the blue wire from the fan.

Connect the three

grounding wires (green,

green/yellow stripe, or

bare copper) coming from

the ceiling, downrod, and

hanging bracket.

Connect the three

grounding wires (green,

green/yellow stripe, or

bare copper) coming from

the ceiling, downrod, and

hanging bracket.

Connect the black

(ungrounded) wire from

the ceiling to the black

wire from the fan.

Blue

Black

Green/Yellow Stripe

White

Ungrounded

Ungrounded (light)

Grounded

Grounding

Wire Nut

Connect the black wire

(ungrounded) from the

ceiling to the black and the

blue wires from the fan.

Black

Blue

WARNING

All wiring must be in accordance with

national and local electrical codes ANSI/NFPA

70. If you are unfamiliar with wiring or in

doubt, consult a qualied electrician.

1886

Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Glass/Bulbs

Canopy Screw

Installing the Bulbs and Glass

Installing the Canopy

Installing the Blades:

x15

Insert grommets found in the hardware bag into the

holes in the blades, then secure each blade to a blade arm

with screws found in the hardware bag.

Repeat x5

Lift the canopy into place so that

the screw holes are aligned.

Insert the two canopy screws

found in the hardware bag.

x10

Lightly attach the blade arms to the motor with

the blade arm screws, then securely tighten

after both screws are attached.

Repeat x5

Canopy Screw

Blade Screw

Grommet

Blade Arm Screw

Remember the screws that you

kept after removing the shipping

blocks? You need them here.

Fan style may vary.

Note:

Assembling the Light

1886

Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light Glass/Bulbs

Canopy Screw

WARNING

GLASS FALL HAZARD

To prevent SERIOUS INJURY or DEATH, make

sure that glass is properly secured.

Installing the Bulbs and Glass

Turn Power

Press the globe and globe

keeper ush against the metal

plate. Thread the light pull chain

through the hole in the center of

the nial cap and thread the fan

pull chain through the hole in the

side of the cap. Finally, thread

only the light pull chain through

the hole in the nial and screw

the nial onto the threaded rod.

Install the included LED

bulbs into the sockets.

When necessary, replace

with bulbs of same wattage.

Want to install your fan without a light kit?

Go to www.HunterFan.com/FAQs and click “How do I install my

fan without the light kit?”

Hunter Pro Tip:

Repeat x2

Fan style may vary.

Note:

Screw light kit screws from the

hardware bag halfway into

the motor housing. It does not

matter which two screw holes

you choose.

Connect the plugs from the upper and

lower switch housings. Make sure to line

up the colored markings on the connectors.

Lift the lower switch housing up until its

screw holes are aligned with the screw

holes in the upper switch housing.

Install the three light kit screws found in

the hardware bag.

Feed the wire plug through the center

hole of the upper switch housing,

then wrap keyhole slots around the

screws and twist counterclockwise.

Insert a third screw, found in the

hardware bag, into place and

then tighten all three screws.

1 of 6

Light Kit Screw

2 of 6

Light Kit Screw

STEP

Assembling the Light

WARNING

FAN FALL HAZARD

Make sure all three screws are tight to secure

the upper switch housing to the mounting plate.

WARNING

FAN FALL HAZARD

Make sure all three screws are tight to secure the

lower switch housing to the upper switch housing

STEP

3 of 6

Light Kit Screw

STEP

910

1886

Reversing the Fan

Reverse

Switch

Ceiling fans work in two directions: downdraft (counterclockwise rotation) and updraft (clockwise

rotation). To change the direction of air ow, turn the fan off and let it come to a complete stop.

The reversing switch is located inside the light xture cage. It can only be accessed when the

cage is removed. Slide the reversing switch to the opposite position. Restart the fan.

Updraft (clockwise rotation)

creates a more indirect airow.

Updraft airow is great for

moving warm air downward.

Downdraft (counterclockwise

rotation) creates a direct breeze

and maximum cooling effect.

Repeat x2

Feed the pull chains from the fan switch

and the light switch down through the

holes in the upper switch housing as

shown. Attach the pull chain pendants

to the light and fan pull chains.

The fan pull chain controls

the speed: from high to off.

The light pull chain controls

the light xture: on and off.

Installing the Pull Chains

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hunter Lüfter Handbücher

Hunter

Hunter Altitude Gebrauchsanweisung

Hunter

Hunter Phenomenon Bedienungsanleitung

Hunter

Hunter 42737-01 Bedienungsanleitung

Hunter

Hunter Elliston Bedienungsanleitung

Hunter

Hunter 41949-01 Bedienungsanleitung

Hunter

Hunter Rhinebeck Bedienungsanleitung

Hunter

Hunter 50472 Bedienungsanleitung

Hunter

Hunter MB502-01 Bedienungsanleitung

Hunter

Hunter 20772 Handbuch

Hunter

Hunter Hunter Ceiling fans Bedienungsanleitung

Hunter

Hunter Hunter Ceiling Fan Bedienungsanleitung

Hunter

Hunter M3571-01 Bedienungsanleitung

Hunter

Hunter Timpani Bedienungsanleitung

Hunter

Hunter Baseball 23252 Bedienungsanleitung

Hunter

Hunter Type 2A Series Gebrauchsanweisung

Hunter

Hunter Marshal Bedienungsanleitung

Hunter

Hunter Stingray Bedienungsanleitung

Hunter

Hunter 90405 Bedienungsanleitung

Hunter

Hunter 42008-01 Bedienungsanleitung

Hunter

Hunter 28496 Handbuch

Hunter

Hunter Dempsey Bedienungsanleitung

Hunter

Hunter Windspan 59012 Gebrauchsanweisung

Hunter

Hunter X-BOARD 20727 Service-Handbuch

Hunter

Hunter Jetty Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung

Lindab

Lindab LTDF Bedienungsanleitung

Clarke

Clarke CDF20HV-P Installations- und Betriebshandbuch