Hunter Hunter Ceiling Fan Bedienungsanleitung

www.HunterFan.com 1.888.830.1326

PAGE

30 inches

7 feet

PAGE

What to Expect with

Your Installation Ceiling Bracket

Ladder

PAGE

Tools Needed

Wiring Canopy

Operation, Maintenance

& Cleaning Troubleshooting

Secondary Support

System

Wall Control

Table of Contents

PAGE

Mounting Options

PAGE

Congratulations on purchasing

your new Hunter® ceiling fan! It will

provide comfort and performance

in your home or ofce for many

years. This installation and operation

manual contains complete

instructions for installing and

operating your fan.

We are proud of our work and

appreciate the opportunity to

supply you with the best ceiling fan

available anywhere in the world.

To register your fan, please visit:

www.HunterFan.com/register

Save your receipt for proof of purchase.

PAGE

Downrod

PAGE

Switch Housing

PAGE

Blades

M0096-01 • 04/23/14 • © Hunter Fan Company

www.HunterFan.com 1.888.830.1326

M0096-01 • 04/23/14 • © Hunter Fan Company

1.888.830.1326

What to Expect with Your Installation

Know your wiring

If you are unfamiliar

with wiring, use a

qualied electrician.

You may need a

friend to help you.

Check box to see

fan weight

Assess location

30 inches

from blade tip

to nearest wall

or obstruction 7 feet

from bottom

edge of blade

to the oor

w.1 - To reduce the risk of re, electrical shock, or

personal injury, mount fan directly from building

structure and/or an outlet box marked acceptable for

fan support of 70 lbs (31.8 kg) and use the mounting

screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing

or servicing your fan, disconnect the power by turning

off the circuit breakers to the outlet box and associated

wall switch location. If you cannot lock the circuit

breakers in the off position, securely fasten a prominent

warning device, such as a tag, to the service panel.

w.3 - To reduce the risk of re, electrical shock, or motor

damage, use only Hunter Solid State Speed Controls.

w.4 - To reduce the risk of personal injury, do not bend the

blade brackets when installing the blade brackets, balancing

the blades, or cleaning the fan. Do not insert foreign objects

in between rotating fan blades.

c.1 - All wiring must be in accordance with national and

local electrical codes ANSI/NFPA 70. If you are unfamiliar

with wiring, use a qualied electrician.

c.2 - Use only Hunter replacement parts.

Assess ceiling angle

Read and Save These Instructions

This product conforms to UL Standard 507.

WARNINGS

CAUTIONS

Must be able to

secure the fan to

building structure or

fan-rated outlet box

Ceiling angles greater

than 34° will require an

Angled Mounting Kit.

See page 4 for details.

www.HunterFan.com 1.888.830.1326

Tools Needed

Ladder

Power Drill

(optional)

9/64” Drill Bit

(optional)

Screwdrivers

Pliers Wire Strippers

If mounting to a support structure, you will also need these tools.

M0096-01 • 04/23/14 • © Hunter Fan Company

www.HunterFan.com 1.888.830.1326

M0096-01 • 04/23/14 • © Hunter Fan Company

1.866.268.1936

If you have an angled ceiling:

1. If your ceiling angle is less than 34°, hang your fan

by the standard downrod (included).

2. If your ceiling angle is greater than 34°, you will

also need an Angled Mounting Kit (sold separately).

Guide Touches

BOTH Ceiling & Wall

Guide Touches Wall

but

NOT Ceiling

You need an

Angled

Mounting Kit.

Follow the

instructions in

this manual.

*most common

If you have a at ceiling:

Hang your fan by the standard downrod (included).

Mounting Options

Use Standard Mounting

to hang the fan from a at ceiling.

Use Angled Mounting

to hang the fan from a

vaulted or angled ceiling.

34OCEILING

WALL

OPTION

Standard

Mounting

OPTION 2

Angled

Mounting

2 3

SLIDE

toward ceiling

PLACE

against wall

FOLD

on dotted line

34°

Use the three steps below to determine if your ceiling angle is greater than 34°

Support

Structure

Ceiling

Outlet Box

(required)

Angled

Mounting

Style

Standard

Mounting

Style

Support

Structure

Ceiling

Outlet Box

(required)

M0096-01 • 04/23/14 • © Hunter Fan Company

www.HunterFan.com

1.888.830.1326

www.HunterFan.com

Ceiling Bracket

Refer to warning w.1 on pg. 2

To avoid possible electrical shock, before

installing your fan, disconnect the power by

turning off the circuit breakers to the outlet

box associated with the wall switch location.

For angled ceilings, point

opening toward peak.

If you are unable to do this,

call Technical Support at

1-888-830-1326.

Make sure all four bumpers are

still attached.

Use wood screws

(included) when securing

to support structure with

approved electrical outlet

box. Drill 9/64” pilot holes

in support structure to aid

in securing ceiling bracket

with hardware found in

the hardware bag.

Use machine screws

(provided with outlet

box) when securing to

existing ceiling fan-rated

outlet box. Make sure

it is securely installed

and is acceptable for fan

support of 31.8 kg (70 lbs)

or less.

OFF

Turn Power

M0096-01 • 04/23/14 • © Hunter Fan Company

1.888.830.1326

Downrod

Slide

1 2 3 4 5

678910

Sold Separately

Longer

Downrod

Standard

Downrod

Option 1

Option 2

skip to next page

If you need a different downrod length follow these steps:

Steps 1-5 to remove standard downrod pipe

Steps 6-10 to reassemble with new pipe

Included

(pre-assembled)

www.HunterFan.com

M0096-01 • 04/23/14 • © Hunter Fan Company

KEEP!

8”

3/8”

(not to scale)

Remove the pre-installed

setscrew so that the downrod

can be inserted.

Hand tighten the downrod (at

least 4-5 full turns) until it stops.

The wires can be cut, but

leave at least 8” extending

from the top of the downrod.

Downrod (continued)

8” 3/8”

Tighten the setscrew

with pliers. DO NOT

HAND TIGHTEN.

If the setscrew is not tightened

securely, the fan may fall.

1.888.830.1326

www.HunterFan.com

Tip: If you have

difculty feeding the

wires through the

downrod, try taping the

wires to a thin dowel

rod, then drop the dowel

rod and wires through

the downrod. Be sure to

remove all tape once the

wires are fed through to

the other side.

M0096-01 • 04/23/14 • © Hunter Fan Company

1.888.830.1326

M0096-01 • 04/23/14 • © Hunter Fan Company

www.HunterFan.com

Downrod (continued)

DO NOT PICK THE FAN UP BY THE

CANOPY OR WIRES. Place the downrod

ball into the slot in the ceiling bracket.

Put the wires and downrod through the

canopy. Let the canopy sit loosely on top

of the fan.

www.HunterFan.com 1.888.830.1326

M0096-01 • 04/23/14 • © Hunter Fan Company

Secondary Hanging System

Insert the end of the braided cable

through the ceiling bracket and

one of the holes in the outlet box

into the ceiling. Access the support

brace in the ceiling. You may not

be able to do this from below

the ceiling depending on your

installation site.

Loosen the two nuts on the wire

clamp and slide the clamp open.

Thread the end of the cable up

through the wire clamp.

Wrap the braided cable around

the support brace once, creating

a complete circle. Thread the end

of the cable through the bottom

of the clamp again so the excess

cable hangs out the top.

Close the clamp by securely

tightening the nuts. Coil up the

excess cable.

Wire Clamp

www.HunterFan.com 1.888.830.1326

Wiring

Using an orange wire

connector from

the hardware bag,

connect the 3 grounding

wires (green, green/

yellow stripe, or bare

copper) coming from the

ceiling, downrod, and

hanging bracket.

(Grounding) Green/Yellow

Stripe

Green/Yellow

Stripe

White

Black

(Grounded)

Note: To connect the wires, hold the bare metal

leads together and place a wire connector over

them, then twist clockwise until tight.

Using the orange wire

connectors from

the hardware bag, connect

the black wire (ungrounded)

from the ceiling to the black

and the blue wires from the

fan. Connect the white wire

(grounded) from the ceiling to

the white wire from the fan.

Blue

Turn the splices upward and push them carefully back through the hanger bracket

into the outlet box. Spread the wires apart, with the grounded wires on one side of

the outlet box and the ungrounded wires on the other side of the outlet box.

Refer to CAUTION c.1 on pg. 2

(Ungrounded)

Andere Handbücher für Hunter Ceiling Fan

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hunter Lüfter Handbücher

Hunter

Hunter Avia II Bedienungsanleitung

Hunter

Hunter 28568 Bedienungsanleitung

Hunter

Hunter 28496 Bedienungsanleitung

Hunter

Hunter Hardwick 50593 Bedienungsanleitung

Hunter

Hunter 28672 Service-Handbuch

Hunter

Hunter 23860 Handbuch

Hunter

Hunter 21587 Bedienungsanleitung

Hunter

Hunter Brayden 21325 Bedienungsanleitung

Hunter

Hunter 51736 Bedienungsanleitung

Hunter

Hunter Windbound Bedienungsanleitung

Hunter

Hunter 22875 Handbuch

Hunter

Hunter 23915 Bedienungsanleitung

Hunter

Hunter 9101X Bedienungsanleitung

Hunter

Hunter 21421 Handbuch

Hunter

Hunter Exteriors 90195 Bedienungsanleitung

Hunter

Hunter SPA SELECT 90051 Bedienungsanleitung

Hunter

Hunter 52429 Bedienungsanleitung

Hunter

Hunter 99183 Bedienungsanleitung

Hunter

Hunter Bayview Bedienungsanleitung

Hunter

Hunter 42660-01 Bedienungsanleitung

Hunter

Hunter 28439 Gebrauchsanweisung

Hunter

Hunter Hunter Ceiling Fan Bedienungsanleitung

Hunter

Hunter 41847-01 Bedienungsanleitung

Hunter

Hunter 44806 Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Hinkley

Hinkley HIGHLAND Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung

Lindab

Lindab LTDF Bedienungsanleitung