Hunter Hunter Ceiling fans Bedienungsanleitung
1
41524-01 9-5-2001
®
Installation and Operation Manual
For Hunter Ceiling Fans
41524-01 9-5-2001
®
SINCE 1886
2
41524-01 9-5-2001
®
3
41524-01 9-5-2001
®
CONGRATULATIONS!
Your new Hunter ceiling fan is an
addition to your home or office that
will provide comfort and perfor-
mance for many years. his manual
gives you complete instructions for
installing and operating your fan.
We are proud of our work. We ap-
preciate the opportunity to supply
you with the best ceiling fan avail-
able anywhere in the world.
Before installing your fan, record the
following information for your
records and warranty assistance.
Please refer to the carton and the
Hunter nameplate (located on top
outside fan motor housing) for the
proper information.
© 2001 Hunter Fan Co.
9-5-2001
Model Name __________________
Catalog No. ___________________
Serial No. _____________________
Date Purchased ________________
Where Purchased ______________
_____________________________
Please attach your Hardware Sheet
and Exploded View Sheet to this
manual for future reference.
Attach Your Receipt
or a Copy of
Your Receipt Here
4
41524-01 9-5-2001
®
CONTENTS
Important Information....................................................................................................................................... 5
Step 1 - Getting Ready ...................................................................................................................................... 6
Step 2 - Installing the Ceiling Plate .................................................................................................................... 8
Step 3 - Assembling Pipe/Ball Assembly ........................................................................................................... 10
Step 4 - Assembling the Fan ............................................................................................................................ 12
Step 5 - Hanging the Fan ................................................................................................................................ 14
Step 6 - Wiring the Fan ................................................................................................................................... 15
Step 7 - Attaching the Canopy ........................................................................................................................ 17
Step 8 - Assembling Fan Blades ....................................................................................................................... 18
Step 9 - Attaching the Switch Housing ............................................................................................................ 20
Step 10 - Installing Light Fixture ...................................................................................................................... 23
Operating Your Hunter Fan ............................................................................................................................. 28
Cleaning and Maintenance ............................................................................................................................. 29
roubleshooting .............................................................................................................................................. 30
5
41524-01 9-5-2001
®
IMPORTANT INFORMATION
not lo k the ir uit break-
ers in the off position, se-
urely fasten a prominent
warning devi e, su h as a
tag, to the servi e panel.
• All wiring must be in a or-
dan e with national and lo-
al ele tri al odes and
ANSI/NFPA 70. If you are
unfamiliar with wiring, you
should use a qualified ele -
tri ian.
• To redu e the risk of per-
sonal injury, do not bend
the blade atta hment sys-
tem when installing, bal-
an ing, or leaning the fan.
Never insert foreign obje ts
between rotating fan
blades.
DO YOU NEED HELP?
o install a ceiling fan, be sure you
can do the following:
• Locate ceiling joist or other suit-
able support in ceiling.
• Drill holes for and install wood
screws.
• Identify and connect electrical
wires.
• Lift 40 pounds.
If you need help installing the fan,
your Hunter fan dealer can direct you
to a licensed installer or electrician.
• To redu e the risk of fire,
ele tri al sho k, or motor
damage, do not use a solid-
state speed ontrol with
this fan. Use only Hunter
speed ontrols.
WARNINGS
• To avoid possible ele tri al
sho k, before installing
your fan, dis onne t the
power by turning off the
ir uit breakers to the out-
let box and asso iated wall
swit h lo ation. If you an-
CAUTIONS
• Read entire booklet are-
fully before beginning in-
stallation and save these
instru tions.
• To redu e the risk of per-
sonal injury, atta h the fan
dire tly to the support
stru ture of the building a -
ording to these instru -
tions, and use only the
hardware supplied.
6
41524-01 9-5-2001
®
GATHERING THE TOOLS
You will need the following tools for
installing the fan:
• Electric drill with 9/64" bit
• Standard screwdriver
• Phillips-head screwdriver
• Wrench or pliers
OPTIONAL ACCESSORIES
Consider using Hunter’s optional ac-
cessories, including a wall-mounted
or remote speed control. o install and
use the accessories, follow the instruc-
tions included with each product.
For quiet and optimum performance
of your Hunter fan, use only Hunter
speed controls.
STEP 1 - GETTING READY
PREPARING THE FAN SITE
he location of a ceiling fan and how
the fan is attached to the building
structure are essential for reliable
operation, maximum efficiency, and
energy savings. For this reason, we
have included a separate booklet —
“Guide to Choosing and Preparing
a Ceiling Fan Site” — to help you
select the best location for your fan.
he booklet also provides informa-
tion to ensure your fan support and
electric outlet box meet UL-approved
safety codes for ceiling fans.
he instructions in this installation
manual assume that you have used
“Guide to Choosing and Preparing
a Ceiling Fan Site” to pick the fan
location and make certain the proper
fan support and outlet box are in-
stalled.
CHECKING YOUR FAN PARTS
Carefully unpack your fan to avoid
damage to the fan parts. Check for
any shipping damage to the motor
or fan blades. If one of the fan blades
was damaged in shipment, return all
the blades for replacement.
Hint: If you are installing more than
one fan, keep the fan blades
in sets, as they were shipped.
he fan includes a separate diagram
of the screws and other small parts
needed for the fan. Keep this dia-
gram handy for identifying parts dur-
ing installation; the diagram indicates
the step in which each part is used.
If any parts are missing or damaged,
contact your Hunter dealer or call
Hunter Parts Department at
901-248-2222.
7
41524-01 9-5-2001
®
INSTALLER’S CHOICE®
his patented 3-position mounting
system provides you maximum instal-
lation flexibility and ease. You can
install your Hunter fan in one of three
ways. he steps in this manual in-
clude specific instructions for the fan
mounting method of your choice. For
a ceiling 8 feet or higher, standard
mounting is recommended.
Flush Mounting (Figure 1a) fits
close to the ceiling, for low ceilings
less than 8 feet high.
Standard Mounting (Figure 1b)
hangs from the ceiling by a connec-
tor pipe (included), for ceilings 8 feet
or higher. For ceilings higher than
eight feet, you can purchase Hunter
extension rods. All Hunter fans use
sturdy 3/4" diameter pipe to assure
stability and wobble-free perfor-
mance.
Angle Mounting (Figure 1c) hangs
from a vaulted or angled ceiling.
Figure 1 - Angle Mounting
Figure 1b - Standard Mounting
Figure 1a - Flush Mounting
10"
12"
34°Max
Pitch
12
8
8
41524-01 9-5-2001
®
STEP 2 - INSTALLING THE CEILING PLATE
4. Align the slotted holes in the ceil-
ing plate with the pilot holes in
the wood support structure.
Note: he isolation pads should
be flush against the ceiling.
1. Drill two pilot holes into the wood
support structure through the
outermost holes on the outlet
box. he pilot holes should be
9/64" in diameter by 2 3/4" in
depth.
2. Bring the lead wires around the
sides of the ceiling plate. hread-
ing the lead wires through the
hole in the middle may cause
problems when installing the re-
mote and trying to close the
canopy.
3. Your fan comes with two neo-
prene noise isolators. Position the
isolators between the ceiling plate
and ceiling by inserting the raised
areas on each isolator into the
holes in the ceiling plate. Refer to
Figure 2a.
Figure 2a - Adding Isolators to Ceiling
Plate
Figure 2b - Corre t Position of Ceiling
Plate for Angle Mounting
Ceiling Plate
Hook
I olator
Ceiling
Plate
For Angle Mounting Only: Be
sure to orient the ceiling plate so
that the two hooks point up to-
wards the ceiling peak as shown
in Figure 2b. Note: You will use
the hooks to support the fan
while wiring the fan.
9
41524-01 9-5-2001
®
Figure 2 - Atta hing Ceiling Plate to
2 x 4 Bra e
2 x 4 Brace
Ceiling Joi t
Ceiling
Outlet Box
Ceiling
Plate
Flat
Wa her 3" Wood
Screw
5. Place a flat washer on each of the
two 3" screws and pass the
screws through the slotted holes
in the ceiling plate as shown in
Figure 2c.
6. ighten the screws into the 9/64"
pilot holes; do not use lubricants
on the screws. Do not over-
tighten.
10
41524-01 9-5-2001
®
As discussed in S EP 1 - GE ING
READY, your Hunter fan can be in-
stalled in a standard mounting posi-
tion.
Included with the fan are two pipes:
one 3" long pipe/ball assembly for
standard mounting on 8' ceilings and
one 12" long pipe for 9' ceilings and
higher. See Figure 3a.
If you are going to install the fan us-
ing the standard mounting, go to
S EP 4 - ASSEMBLING HE FAN.
If you are going to install the fan us-
ing the 12" long pipe for 9' ceilings
or higher, complete the steps below.
STEP 3 - ASSEMBLING PIPE/BALL ASSEMBLY
3. Remove the ball from the pipe.
4. Remove the pin from the pipe.
Figure 3a - Pipes
Figure 3b - Removing ball assem-
bly
REMOVING BALL ASSEMBLY
For the following steps refer to
Figures 3b and 3c.
1. Locate the 3" pipe/ball assembly.
2. Remove the positioning screw
from the top of the ball.
NOTE: he ball will become
loose and should slide down the
pipe.
3" Pipe/Ball
A embly
12" Pipe
Pin
Po itioning Screw
Leadwire
A embly
Ball
Ground
Screw
Andere Handbücher für Hunter Ceiling fans
23
Inhaltsverzeichnis
Andere Hunter Lüfter Handbücher
Hunter
Hunter Lake Cottage Gebrauchsanweisung
Hunter
Hunter 54151 Bedienungsanleitung
Hunter
Hunter 21345 Service-Handbuch
Hunter
Hunter Solaria Bedienungsanleitung
Hunter
Hunter 20171 Bedienungsanleitung
Hunter
Hunter MB502-01 Bedienungsanleitung
Hunter
Hunter 22540 Bedienungsanleitung
Hunter
Hunter 50171 Bedienungsanleitung
Hunter
Hunter Beacon Hill 53083 Gebrauchsanweisung
Hunter
Hunter 23782 Handbuch
Hunter
Hunter 50333 Bedienungsanleitung
Hunter
Hunter ECO 14 Bedienungsanleitung
Hunter
Hunter Kensie 50642 Bedienungsanleitung
Hunter
Hunter 22437 Handbuch
Hunter
Hunter Sandin Bedienungsanleitung
Hunter
Hunter Ashbury 87001 Bedienungsanleitung
Hunter
Hunter Hunter Ceiling Fan Bedienungsanleitung
Hunter
Hunter 41535-01 Bedienungsanleitung
Hunter
Hunter 7 Models Bedienungsanleitung
Hunter
Hunter Vernazza 53029 Gebrauchsanweisung
