Hunter EC-401-A Betriebsanleitung

QUICK PROGRAMMING GUIDE

Setting the Date and Time

1. Turn the dial to the CURRENT

TIME/DAY position.

2. Hours will be flashing. Press the

or button to change the hour

shown on the display. Press the

to proceed to setting the minutes.

3. Minutes will be flashing. Use the

or button to change the minutes

shown on the display. Press the

to proceed to select AM PM or 24

hour time.

4. The time will be displayed and an

arrow will be flashing on AM. Press

the or buttons to select AM

PM or 24 hour. Press the to

proceed to setting the day of the

week.

MO will be flashing indicating the

first day of the week. Press the

or to select the day of the week

(-E models are indicated by

numbers 1 through 7)

HUNTER EC-401-A Residential Irrigation Controller

Setting Watering Start Times

1. Turn the dial to the START

TIMES position.

2. The factory preset is set on

program A. If necessary you can

select program B or C by

pressing the button.

3. Use the or button to

change the start time. (The start

times advance in 15 minute

increments).

Press the button to select the

next start time or press for the

next program.

NOTE: One start time will acti ate all stations

sequentially in that program. This eliminates the

need to enter each station’s start time. Multiple start

times in a program can be used for separate

morning, afternoon, or e ening watering cycles.

Installed by:

www.property aintenance.net.au

QUICK PROGRAMMING GUIDE

Setting Station Run Times (Length of Watering for Each Area)

1. Turn the dial to the RUN TIMES position.

2. Use the or button to

change the station run time

on the display.

3. Press the button to

advance to the next station.

4. Repeat steps 3 and 4 for

each station.

5. You can set station run times

anywhere from 0 to 4 hours.

6. You can move between programs while staying on the

same station. However it is recommended that one program is

completed before going on to the next program.

Setting Days To Water

1. Turn the dial to the WATER

DAYS position.

2. The controller will display the

seven days of the week with a



icon or a icon above the numbered day. The



icon would

represent an “On” water day while a icon would represent an

“Off” watering day.

Installed by:

www.property aintenance.net.au

Selecting Specific Days of the Week to Water

1. With the cursor on a specific day

(the cursor always starts with

MO) press the button to

activate a particular day of the

week to water. Press the

button to cancel watering for that day. After pressing a button the

cursor automatically advances to the next day.

2. Repeat step 1 until all desired days have been selected.

The selected days will show with a



to indicate their status as ON.

The last



is the last day of watering for that program.

Selecting Inter al Watering

With this option you can select interval

watering from 1 to 31 days.

1. With the cursor on day 7 press

the button until the two calendars

and a flashing 1 appear in the display. Interval watering schedule

appears on the display.

2. Press the or button to select the number of days between watering

days (1 to 31). This is called the interval. The controller will water the

selected program at the next Start Time and will then water at the

interval programmed.

Automatic

After programming is complete turn the dial to

AUTOMATIC to enable automatic execution of all

selected programs and start times. Watering will not

occur unless dial is in the AUTOMATIC position.

HUNTER EC-401-A Residential Irrigation Controller

Andere Hunter Bewässerungssystem Handbücher

Hunter

Hunter Institutional Series I-35 Bedienungsanleitung

Hunter

Hunter Professional Series PGP Bedienungsanleitung

Hunter

Hunter Institutional Series Bedienungsanleitung

Hunter

Hunter PGP Ultra Series Bedienungsanleitung

Hunter

Hunter Institutional Series Bedienungsanleitung

Hunter

Hunter Institutional Series I-90 Bedienungsanleitung

Hunter

Hunter I-60 Series Bedienungsanleitung

Hunter

Hunter Professional Series Leitfaden

Hunter

Hunter Institutional Series Bedienungsanleitung

Hunter

Hunter Hydrawise HC-1200M Bedienungsanleitung

Hunter

Hunter ST Series Bedienungsanleitung

Hunter

Hunter I-31 Plus Bedienungsanleitung

Hunter

Hunter Institutional Series Bedienungsanleitung

Hunter

Hunter X-CORE Betriebsanleitung

Hunter

Hunter Professional PGP Bedienungsanleitung

Hunter

Hunter Professional PGP Ultra Series Bedienungsanleitung

Hunter

Hunter PGJ Bedienungsanleitung

Hunter

Hunter Institutional I-40 Series Bedienungsanleitung

Hunter

Hunter Hydrawire Bedienungsanleitung

Hunter

Hunter ST Series Bedienungsanleitung

Hunter

Hunter G835 Bedienungsanleitung

Hunter

Hunter PGJ Rotor Bedienungsanleitung

Hunter

Hunter Institutional Series I-25 Plus Bedienungsanleitung

Hunter

Hunter SRC Plus 600i Bedienungsanleitung

Beliebte Bewässerungssystem Handbücher anderer Marken

Cellfast

Cellfast 52-305 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Star Galaxy SGQR Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product CENTRAL A Bedienungsanleitung

Oral Care Technologies

Oral Care Technologies Hydro Floss Bedienungsanleitung

Reliable

Reliable F1-300 Bedienungsanleitung

Tyco Fire Product

Tyco Fire Product Gem F892 Bedienungsanleitung

Netafim

Netafim NETBEAT Bedienungsanleitung

Irrigation-Mart

Irrigation-Mart KIT-GK100-RV-B Bedienungsanleitung

Tyco

Tyco CC3 Bedienungsanleitung

Reliable

Reliable F4FR Bedienungsanleitung

OpenSprinkler

OpenSprinkler OSPi Bedienungsanleitung

EINHELL

EINHELL GE-WW 5537 E Bedienungsanleitung

Valley

Valley Bender160 Bedienungsanleitung

Reliable

Reliable F1FR42 Series Bedienungsanleitung

Reliable

Reliable F1FR-300 Bedienungsanleitung

Toro

Toro 730 Series Kurzanleitung

Eden

Eden 97063-EDAMZ Bedienungsanleitung

Tyco

Tyco TY-L Series Bedienungsanleitung