HUUM UKU Leitfaden
UKU GSM/ Wi-Fi/ Local
HEATER CONTROLCONSOLE 3–15
ELEKTRIKERISE JUHTSEADE 17–29
SÄHKÖKIUKAAN OHJAUSKESKUS 31–43
STEUERKONSOLE 45–58
59–73
BASTUAGGREGATETES STYRENHET 75–87
DISPOSITIVO DI COMANDO 89–101
103–115
117–129
CONSOLE DE COMMANDE POUR POÊLE 131–144
145–157
[email protected] www.huum.eu
3
UKU GSM/Wi-Fi/Local
HEATER CONTROLCONSOLE
Installation and User Instructions
NB! The electrical work described in this manual must be carried
The devices set contains:
• UKU control panel;
•
• thermal sensor;
• door sensor;
•
•
NB! Keep this operating manual near the device so that at any time
4
BEFORE INSTALLATION
Before installation read the operation manual thoroughly This
way
prevent
•
install the device.
• Installation and maintenance of the device is only allowed when it
is not under voltage.
• For unique problems that are not covered in the installation
•
authorisation.
• The manufacturer has the right to make improvements to the
device. The latest version of the operation manual can be found
• Make sure that the building’s cables from the main switchboard
switchboard
to the sauna. Install
separate
protection for the heater.
• It is recommended to connect the unit to the mains without an
earth-leakage circuit breaker.
• This product is intended to operate with equipment that meets
Symbols used in the installation manual
6
2
1
3
4
5
7
UKU control panel
Main controller
Door sensor
Temperature sensor
5
6
WARNING! Not following these instructions may lead to serious or fatal
CAUTION! Not following these instructions may lead to minor to semi-
NB! Also follow the special safety requirements given in the individual
INSTALLING UKU ELECTRICALCONTROL
DEVICE
• Before installation disconnect the electric heater from the power
supply in the switchboard.
• The control device 1must be installed outside the steam
manufacturer’s recommendations.
• If your main controller 2
supports the use of Wi-Fi or GSM
connec
tions
it must be
installed
where the appropriate
reception
is
available.
• The device must be installed in a dry place. The protection
•
CAUTION! The control device must be connected to the mains
NB! Measure the lengths of the cables and determine the locations of
NB! When connecting the the control device with a singel phase make
sure the fuse where the power is coming from has the necessary
7
Control panel UKU 1
With a wooden housing
• Remove
the
back
cover
of UKU
control
panel
to
it
to the
wall
.
•
control panel is at eye level.
•
•
wall. Secure it with screws from the sides.
With a plastic housing
•
the power cable with the cable screws of UKU
control
panel
.
•
•
• Replace the control knob to the control panel.
Main module 2
•
•
•
sensor and door switch through a cable gland to the enclosure
•
Door sensor 3
• T
•
• Secure the magnet to the door. It must allow the door to close
and pass directly by the doorpost.
• Secure the sensor to the doorpost so that when the door closes
the sensor and the magnet will be aligned. The maximum distance
door is closed.
8
Temperature sensor with overheating protection 4
•
•
•
•
•
Vaporiser 6
• A vaporiser is connected to outputs SLSN as shown in the
instructions.
CAUTION! When connecting the control console with an electrical
heater with vaporiser function ensure that the water tank is always
Connection of a lighting system
•
the control console.
•
•
7
9
Connecting the Wi-Fi controller to the network
•
controller doesn’t support Wi-Fi names and passwords longer
•
•
•
•
• You
can
continue
to enter the password after selecting a Wi-Fi network.
•
•
Connecting the GSM controller to the network
•
SIM card is activated. The SIM card and sauna will come online in
•
not want the mobile app after the free year you don’t have to pay
Payment is made by credit card in the mobile app.
•
UKU mobile app
The UKU Wi-Fi or GSM device can also be controlled by a smartphone
with a special mobile application in addition to the control panel. This
way you can put the sauna to work being far from home.
10
Download the HUUM application from the application page of your
• IOS – App Store;
• Android – Google Play;
• Web application - app.huum.eu
•
•
ID number and code of the sauna are on the sticker of the main
module.
•
working properly and your commands actually reach the sauna.
• An unlimited number of users can be connected to one sauna.
NB! In case the control console is not connected to the user account
in the mobile application, the sauna will not be connected with the
TESTING
NB!
WARNING!
• Check the power terminals of the circuit breaker and main
from the switchboard on by using the circuit breaker. The screen
• Check the door switch: close the steam room’s door. Turn the
control console on. Set the temperature. Turn the heating on.
seconds
must switch on
again
.
Andere Handbücher für UKU
2
Inhaltsverzeichnis
Sprachen:
Andere HUUM Fernbedienung Handbücher
Beliebte Fernbedienung Handbücher anderer Marken
Panasonic
Panasonic EUR7622KB0 Bedienungsanleitung
Bang & Olufsen
Bang & Olufsen Beo4 Bedienungsanleitung
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung
Multiplex
Multiplex PROFI TX 9 Bedienungsanleitung
One Remote
One Remote RMB4 Bedienungsanleitung
FUTABA
FUTABA 9ZAP - PART2 Bedienungsanleitung
