Hydro-Force Pumpout-V115 Bedienungsanleitung

REVISED: 03.14.2019

V115 PUMP OUT MANUAL

AC12H

Introduction

Congratulations on your purchase of the Hydro-Force V115 Pump-out. The V115

is designed to give performance combined ith versatility. Years of experience,

engineering, and planning have gone into the design and manufacturing of the

V115. We take a great deal of pride in the V115 Pump-out; our goal is no less than

your complete satisfaction.

This manual ill provide users ith the kno ledge required to operate the V115

Pump-out safely, to understand ho to properly operate and maintain the

machine, and to ensure that the equipment operates at its maximum performance

level.

All users must read and understand this manual completely efore

operating the machine.

Al ays maintain this manual in legible condition adjacent to the V115 Pump-out,

or place in a secure location for future reference.

Any questions pertaining to the operating or servicing of this unit should be

directed to your nearest Hydro-Force distributor.

This manual is ritten specifically for the V115 Pump-out units manufactured by:

Aramsco

4282 S 590 W

Salt Lake City, UT 84123

801-268-2673

801-268-3856 FAX

Information in this manual is subject to change ithout notice and does not

represent a commitment on the part of Hydro-Force or its parent or affiliated

companies.

Technical Specifications

V115 Pump-out

Height: 18-1/2”

Length: 15”

Width: 14-3/8”

Weight: 28.4l s.

Tank Capacity: 11 gallons

Pump-out Pump: Little Giant 115VAC 8-20 gpm

Maximum psi 11.4 – Maximum pumping height 26 ft.

Power Draw: 5.00amps Waste Pump

Standard Equipment

V115 Pump-out Tank Unit

Pump-out Hose: 50’ x 3/4” with male & female garden hose fittings

AH65

50’ X 3/4” Pump Out Hose

Additional / Optional Equipment

Extra Pump-Out Hose 3/4” x 50’: AH65

Replacement SS Filter: AC11S

GFCI Protected Extension cord 12/3 x 50’: NM4407

Extension Cord 12/3 x 50’: AX33

Shock uster - External GFCI Protector: AX126

2” Flash Cuff Male Starter Cuff AH203

AX126

SHOCKBUSTER GFCI

NM4407

50’ X 12/3 CORD WITH GFCI

AX33

50’ X 12/3 EXTENSION CORD

AC11S

SS FILTER SCREEN

AH65

50’ X 3/4” PUMP OUT HOSE

AH203

2” FLASH CUFF MALE STARTER

Safety

CAUTION! This machine is an electrical appliance. Care must e

taken to reduce the risk of electrical shock.

•READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE OPERATING THE V115 Pump-

out.

•To reduce the risk of property damage or injury, repairs to electrical systems should only be performed by

experienced technicians. Contact your distributor for assistance.

•Unplug machine po er cord from outlet before performing any repairs on the pump-out.

•Plug unit into grounded outlets only. Do not remove ground prong from plug. Use of a Ground Fault Circuit

Interrupting (GFCI) device will reduce the risk of electrical shock.

•Do not use the V115 Pump-out in standing ater or on et surfaces.

•Do not store the V115 Pump-out in et conditions.

•If V115 Pump-out is leaking, unplug po er cord from outlets before approaching or touching machine.

•Do not unplug po er cord by pulling on the cord. Grasp the plug hen unplugging the cord.

•Do not pull the V115 Pump-out by the cord.

•If cord or plug is damaged, do not use cord. Replace ith ne cord or repair as needed before use.

Section

WARNING! This machine must e protected from conditions which may

damage the pump, tank, hoses and other components.

•Freezing of water in this machine will cause serious damage. The V115 Pump-out and hoses must be

protected from freezing temperature. Store, transport, and use this equipment only in temperatures ell above

freezing. (32ºF or 0ºC). If you suspect the V115 Pump-out has been frozen, do not plug in or turn on machine

until you are sure it has tha ed completely.

•If the equipment cannot be stored or transported in a arm environment, it can be guarded from freezing by

running an anti-freeze solution through the pump. The V115 Pump-out is filled at the factory ith anti-freeze

to eliminate damage during shipment in cold eather.

•The V115 Pump-out must not be used to pump flammable or combustible materials or used in areas here

these materials may be present.

•Rinse the V115 Pump-out tank and pump ith fresh ater after each day’s use.

•Do not allo pump to run dry. Do not by-pass the float s itch to operate the pump.

•Examine the pump-out hose before each use and replace or repair hose as needed.

•Clean the V115 Pump-out tank daily to keep pump-out pump from becoming clogged.

•Keep Vacuum Filters clean and check float s itch for proper operation.

•Drain V115 Pump-out tank before moving unit. Lift using only the handle or support tank from underneath.

•Water may be spilled, drip, or be exhausted from discharge port or hose connections during operation. Place

unit in area here ater ill not cause damage or use drop cloth to protect surfaces.

Operation Procedures

Knowledge of the proper operation of the V115 Pump-out is required to

ensure user safety and efficient performance of the extractor.

SET UP AND OPERATION

Vacuum Hose Connection:

Connect the hose cuff from the 2” vacuum hose coming from the cleaning tool to one of the 2” hose barbs

on the inlet side of the V115 Pump-out. If you are using t o tools the second hose can be connected to the

other barb. If you are only using one tool keep the rubber stopper in the second barb. Arro s indicate the

direction of the airflo from the tool to the extractor.

Connect the hose cuff from the 2” vacuum hose coming from the extractor to one of the 2” hose barbs on

the outlet side of the V115 Pump-out. If you are using t o tools the second hose can be connected to the

other barb. If you are only using one tool keep the rubber stopper in the second barb.

For “4 to the Door” operation connect two 2” vacuum hoses to the ar s on the outlet side of the

V115 Pump-out tank. A single 2” vacuum hose can run from one inlet port to the tool.

Starter Cuffs can be used to connect Flash Cuffs to the V115 Pump-out. Connect 2” Flash Cuff Male Starter

Cuffs (AH203) to the 2” hose barbs on the inlet side of the V115 Pump-out. Then connect your 2” Female

Flash cuffs. Standard 2” hose cuffs can still be used on the outlet side of the V115 Pump-out.

Section

OUTLET SIDE

–

Connect this side

to EXTRACTOR

INLET SIDE

–

Connect this side

to the TOOL

Electrical Connection:

Plug an extension cord into an 115v AC all outlet. Use a GFCI protected outlet, a GFCI protected cord or

an external GFCI device to reduce the risk of electrical shock.

The V115 Pump-out only dra s 5amps of po er so most household outlets ill safely handle the load.

If a circuit breaker trips during operation, reset the breaker and move the cord to another outlet as needed.

Connection of Pump-out Hose:

The pump-out hose is a 50’ section of 3/4” garden hose.

•Remove the cap from the pump-out discharge port fitting on the side of the tank.

•Connect the pump-out hose to the discharge port fitting.

•Place the other end of the hose in a commode or drain connected to the sanitary se er system.

•Secure hose end to prevent movement during pumping.

When ready to begin cleaning, turn the V115 Pump-out po er s itch to the ON position.

•Do not turn on waste pump switch unless pump-out hose is connected and has een routed

to a proper drain.

Pump-out Hose – AH65

3/4” id X 50’ with M-F Garden Hose Fittings

Connect the Female Garden Hose Fitting end of the

Pump-out Hose to the pump-out discharge port fitting

on the side of the tank. Place the other end of the

pump-out hose in a sanitary drain.

DISCHARGE PORT

Shutdown Procedures:

Turn the V115 Pump-out po er s itch to the OFF position and disconnect the po er cord.

Disconnect the pump-out hose from the discharge port fitting and replace the cap.

Roll up the pump-out hose to ard drain to remove remaining ater from hose.

Connect ends of hose together to prevent dirty ater from dripping from hose during transport.

Disconnect the vacuum hoses.

Clean the filter screens as needed. Replacement filter screens are available (AC11S.)

Empty the remaining ater from the tank and rinse out the tank.

•Disconnect the po er cords from the outlets and from the machine.

•Roll up all hoses and cords. Collect and store V115 Pump-out, all tools, and accessories.

Troubleshooting –

V115 Pump-out

Problem

Cause

Solution

Pump-out not

working Building circuit breaker tripped.

Reset breakers or move cords to other outlets. Repeated

tripping of breaker may indicate a short circuit. Check cord

and unit wiring and repair before using pump-out.*

GFCI tripped

Reset GFCI, replace GFCI or move to other outlet

Repeated tripping of GFCI may indicate a short circuit.

Check cord and unit wiring and repair before using pump-

out.*

Faulty power cord Replace cord (AX33 or NM4407)

Faulty switches or internal wiring Check wiring & test switch - Repair as needed * (NM5008)

Pump-out pump faulty Replace pump-out pump (NM5053)

Pump-out pump clogged Clean pump-out – Clean filter screens - Keep tank clean

Outlet check valve stuck Clean or replace check valve

Discharge hose restricted Un-kink, clean out or replace hose

Float switch stuck Clean switch make sure float slides up & down easily

Float switch faulty Replace float switch (NM5054)

* To reduce the risk of fire electrical shock or injury repairs to wiring should only be performed by

experienced service technicians.

If you are not experienced in checking electrical wiring contact your nearest authorized service

center to perform tests and repairs to cords, wiring and switch.

•Contact your distributor for additional troubleshooting

assistance, to order parts, or for advice and assistance in

performing necessary repairs.

Section

Troubleshooting

Inhaltsverzeichnis

Andere Hydro-Force Wasserpumpe Handbücher

Hydro-Force

Hydro-Force V115 Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

moyno

moyno 2000 CC Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung