i-Flash P2DS Series Bedienungsanleitung
1 | P a g e
Pulse P2DS Series
User Manual
Pulse IP Camera User Manual
Model Number: P2DS Series
Revision: 3.0.1.2
2 | P a g e
Pulse P2DS Series
User Manual
Safety Instruction
These instructions are intended to assist users with the o eration of the P2DS and also to instruct on
how to avoid dangerous situations or damage to the device.
Warnings: Serious injury or death may be caused if any of the warnings below are neglected.
Cautions: Injury or damage to the equi ment may occur if any of the following caution
messages are neglected.
Warnings
Follow these safeguards
to prevent serious injury or death.
Cautions
Follow these precautions
to prevent potential injury or material
damage.
Warnings:
Input voltage should meet both the SELV (Safety Extra Low Voltage) and
the Limited Power Source with DC 12V according to the IEC60950-1
standard. Please refer to the technical specifications for more details.
Do not use a third-party power adapter or power cord
When the device is installed on the wall or ceiling, make sure that it is
firmly attached.
3 | P a g e
Pulse P2DS Series
User Manual
Notice：
•Make sure that the power supply voltage is correct before using the camera.
•Do not drop the device or expose it to physical shock.
•Do not expose the device to temperatures outside the range of -10 °C to +50°C
when the device is in operation.
•Do not expose the device to damp/wet conditions or high electromagnetism
radiation.
•To avoid heat accumulation, make sure that your operating environment has
proper ventilation.
•Do not attempt to open, disassemble, or modify the device
•
A few parts (e.g. electrolytic capacitor) of the equipment shall be replaced
regularly according to their average life time. The average life time varies from
the differences between operating environments and usage history. Regular
maintenance checks are recommended for all users. Please contact your dealer
for more details.
4 | P a g e
Pulse P2DS Series
User Manual
Contents
Welcome ………………………………………………………………………………………………………………… 5
Pac age Contents ………………………………………………………………………………………………… 6
Product Overview ………………………………………………………………………………………………… 7
Configuring the P2DS via Web Browser ……………………………………………………… 10
Access P2DS Web Configuration Menu ……………………………………………… 10
Connect The Camera to DHCP server …………………………………………………………… 10
Connect to the Camera using Static IP …………………………………………………………… 11
Home Web Page …………………………………………………………………………………………… 12
System Page ………………………………………………………………………………………………… 14
Video & Audio Page …………………………………………………………………………………….. 15
Networ ing Page…………………………………………………………………………………………… 16
DDNS Page……………………………………………………………………………………………………. 19
SIP Page…………………………………………………………………………………………………………. 21
Status Page ………………………………………………………………………………………………….. 23
User Management Page ………………………………………………………………………………….. 25
Maintenance Page ………………………………………………………………………………………… 26
SMTP Page ……………………………………………………………………………………………………. 27
FTP Page ………………………………………………………………………………………………………. 28
Alarm HTTP Server Setting……………………………………………………………………………. 29
Motion Detection Page ………………………………………………………………………………… 30
System Log …………………………………………………………………………………………………… 32
5 | P a g e
Pulse P2DS Series
User Manual
Welcome
The
P2DS
is a next generation mini IP dome camera for remote monitoring and
surveillance over your LAN or internet.
The
P2DS
combines best in class IP video technology and SIP rotocols for a robust IP
surveillance solution. The roduct features H.264 video streams with u to 30 frames er
second in full D1, delivering rich image clarity at ra id transmission rates. Integrated SIP can
ass alarms to the PSTN, mobile hones, SIP IP hones, SIP video hones and enables
2-way VoIP communication.
The
P2DS
ensures ease of use, integration and de loyment with a multilingual gra hical
user interface. The
P2DS
can be quickly installed and connected to your network and
accessed from anywhere over the internet. i-Flash Technology flexible video management
software enables users to monitor multi le environments in one easy to use a lication. The
intuitive web interface lets users easily access, manage, view and record live video streams
from the device.
The
P2DS
is a owerful solution for small to medium sized offices, homes and storage
facilities looking to safeguard their valuables.
6 | P a g e
Pulse P2DS Series
User Manual
Package Contents
Items in the pac age:
•P2DS IP Camera
•Quick Installation Guide and Software CD
P2DS
IP Camera
Quick Installation Guide
and Software CD
7 | P a g e
Pulse P2DS Series
User Manual
Product Overview
P2DS Camera
Connectors and Cables
Network: 10/100 Switch LAN Port for connecting to Ethernet
Power – 12V DC Power Jack
Reset Button – Reset the Camera
Connectors and Cables (With Audio)
Audio: Audio In ut
Network: 10/100 Switch LAN Port for connecting to
Ethernet
Power – 12V DC Power Jack
Reset Button – Reset the Camera
8 | P a g e
Pulse P2DS Series
User Manual
P2DS Key Features
Video Com ression H.264 HP、JPEG, Motion JPEG
Image Sensor 1/3.2”, 2-Mega ixel CMOS, 1,600Hx1,200V
Lens 1/3", M12 MEGA, f=3.6 mm, F=1.8 (Selectable）
Day/Night IR Light and IR-CUT control (O tional)
Min. illumination 0.5Lux
Min. illumination Res onse 1.0V/lux-sec (550nm)
Max Video Resolution 1600x1200
Max Frame Rate 6 f s 1600x 1200, 25f s at 1280x720, 30f s at
800x460, 640x360, 480x270, 320x180 and 240x135
Pixel Dynamic Range 71dB, with ( SNRMAX = 42.3dB)
Video Out ut NTSC or PAL Com lex video signal
Frame Rate 10-30f s
Video Com ression Ty e Video Stream / Com lex Video Stream
Com ressed Video Out ut rate 16Kb s - 2Mb s
Audio In ut MIC IN (o tional)
Audio Out ut Linear out ut (LINEOUT，600Ω, O tional)
Audio Com ression Standard G.711
Audio Com ression Rate 16-96kb s，su ort8-16KHz
Network Connection RJ45 10M/100M Ethernet
Power 12VDC or PoE with S litter
O eration Tem erature -10°C – 45°C
O eration Humidity 10–90%（non-condensing）
Dimension 107 mm diameter
Weight ~ 450g
9 | P a g e
Pulse P2DS Series
User Manual
Installation Guide
Minimum Recommended System Requirement
• Windows 2000 Server Professional, Windows XP, Windows Vista, Windows 7
• CPU: Intel Pentium 4 or higher, 2 GHz.
• RAM: 1 GB (4 GB recommended for larger systems).
• Su ort for DirectX 8.0 and above.
Connect your P2DS
Using the Power ada ter as ower su ly
• Connect an RJ-45 cable to the NETWORK ort of the P2DS.
• Connect the other end of the RJ-45 cable to your network or PC.
• Connect the ower su ly to the DC 12V ower jack on the back of the P2DS.
• Connect the other end of the ower su ly with 12VDC 1A minimum to a wall outlet (not included)
Using PoE as power supply with PoE Splitter (not included in Pac age):
• Connect an RJ-45 to the NETWORK ort of P2DS.
• Connect the other end of the RJ-45 cable to a PoE switch.
NOTE: If you are going to connect the device to a hub/switch/router, lease use a straight-through cable.
A cross over cable should be used if you are going to connect the device directly to a PC.
10 | P a g e
Pulse P2DS Series
User Manual
Configuring the P2DS via Web Browser
The P2DS’s embedded Web server res onds to HTTP/HTTPS GET/POST requests.
Embedded HTML ages allow you to configure your IP camera through Microsoft Internet Ex lorer.
Access P2DS Web Configuration Menu
Connect the Camera to DHCP server.
1. Run the Search tool rovided in Software CD
2. Click on button in order to begin device detection
3. The detected devices will a ear in the Out ut field
4. Start Internet Ex lorer on your com uter
5. Enter device IP in the address bar of the browser or double click the camera in Search tool
6. Enter the administrator user name and assword to access the Web Configuration Interface
7. The default user name and assword are both set to admin.
8. IE will indicate that “This website wants to install the following add-on:
9. Install this add-on by following the instructions in IE.
10. You will see the home age.
Inhaltsverzeichnis
Andere i-Flash IP-Kamera Handbücher
