I-Tech LCHH1001 Bedienungsanleitung

Page 2

Content

Introduction...................................................................................................... 3

Hardware Installation........................................................................................ 3

The Display Timing........................................................................................... 5

The Display Outline Dimensions....................................................................... 6

The Display Controls........................................................................................ 7

The Screen Adjustment.................................................................................... 8

Troubleshooting Tips...................................................................................... 10

Specification....................................................................................................11

Product Safety Precautions............................................................................ 12

Page 3

Introduction

Welcome to enjoy the fantastic sightseeing world. This new technology will

bring you the whole new feeling about the “monitor”. We show here some of

the major advantages of the LCD monitor. You will really find some other

advantages when you use it.

Hardware Installation

This chapter will guide you the correct installation procedures of your LCD

monitor.

Unpacking

After you unpack your LCD Monitor, please make sure that the following items

are included in the carton and in good condition. If you find that any of these

items are damaged or missing, please contact your dealer immediately.

One LCD Monitor

15-pin D-sub Video cable (Option)

AC/DC adapter with 12V DC output (Option)

AC power cord (Option)

Quick installation Guide

Installation

This analog LCD display does not require any special drivers. Necessary

drivers are supplied by the video card manufacturer and may be found on the

diskettes supplied with the video card that came with your computer. Windows

98/2000/XP drivers for both the display and the video card are supplied on the

Windows 98/2000/XP CD or diskettes. Unfortunately, Microsoft did not provide

a complete listing of the displays on the initial retail release. You may use the

standard XGA (1024x768) as the display type. The video card must also be set

up correctly in Windows 98/2000/XP and make sure the video output of the VGA

card is on list in Section 6.1 or check your Video Card manual or Windows

98/2000/XP Read me file for further information on Video Card. After the

question listed above is solved, we continue the setup procedure as below.

1. Turn power off both Computer and Display before making any connection.

2. Install Display on the solid horizontal surface such as a table or desk.

3. Connect the power cable and the AC/DC adapter, then connect adapter toe

the back of the LCD monitor.

4. The LCD monitor comes with a 15-pin video cable; you may use this cable

for both IBM PC’s & compatibles and Macintosh.

5. Tighten the screws of the Display cable until the connectors are fastened

securely.

6. Switch on power to the Computer system, then to the monitor.

Page 4

The following picture provides the connection outline

Video Input Pin Assignment

This section describes the pin assignment of the LCD’s video connector. It is

called 15pin Mini D-sub connector.

110 6

Pin No. Signal Connector

1Red Video Signal

2Green Video Signal

3Blue Video Signal

4N.C.

5Ground

6Ground for red video signal

7Ground for green video signal

8Ground for blue video signal

9N.C.

10 Ground

11 N.C.

12 DDC data

13 Horizontalsyncsignal

14 Vertical sync signal

15 DDC clock

Page 5

The Display Timing

Applicable video timing

The following table lists the better display quality modes that the LCD monitor

provides. If the other video modes are input, the monitor will stop working or

display unsatisfactory picture quality.

VESA Modes

Mode

Resolution Total Nominal

Frequency

±0.5KHz

Nominal

Frequency

±0.5KHz

Nominal

Pixel Clock

(MHz)

DOS 720x400@70Hz 900x449 31.469 70.087 28.322

640x480@60Hz 800x525 31.469 59.940 25.175

640x480@72Hz 832x520 37.861 72.809 31.500

VGA

640x480@75Hz 840x500 37.500 75.000 31.500

800x600@56Hz 1024x625

35.156 56.250 36.000

800x600@60Hz 1056x628

37.879 60.017 40.000

800x600@72Hz 1040x666

48.077 72.188 50.000

SVGA

800x600@75Hz 1056x625

46.875 75.000 49.500

1024x768@60Hz

1344x804

48.36360.004 65.000

1024x768@70Hz

1328x806

56.476 70.069 75.000

XGA

1024x768@75Hz

1312x800

60.023 75.029 78.750

IBM Modes

EGA 640x350@70Hz 800x449 31.469 70.086 25.175

DOS 720x400@70Hz 900x449 31.469 70.087 28.322

VGA 640x480@60Hz 800x525 31.469 75.000 31.500

XGA 1024x768@72Hz

1304x798

57.515 72.100 75.000

MAC Modes

VGA 640x480@60Hz 800x525 31.469 59.940 25.175

SVGA

832x624@75Hz 1152x667

49.725 74.551 57.2832

XGA 1024x768@75Hz

1328x804

60.927 74.927 80.000

Page 6

The Display Outline Dimensions

Unit: mm

Page 7

The Display Controls

Membrane Control Button

POWER SWITCH:Pushing the power switch will turn the monitor on.

Pushing it again to turn the monitor off.

Power LED: Power ON-Green / Power off-No.

Up Key>:Increase item number or value of the selected item.

Menu Key: Enter to the OSD adjustment menu. It also used for go back to

previous menu for sub-menu, and the change data don’t save to memory.

Down Key<:

Decrease item number or item value when OSD is on.

When OSD is off, it is hot key for input switch between VGA, AV, and S-video.

Screen Adjustment Operation Procedure

1. Entering the screen adjustment

The setting switches are normally at stand-by. Push the Menu Keyonce

to display the main menu of the screen adjustment. The adjustable items

will be displayed in the main menu.

2. Entering the settings

Use the Down Key< and Up Key> buttons to select the desired setting

icon and push the SELECT button to enter sub-menu.

3. Change the settings

After the sub-menu appears, use the Down Key< and Up Key> buttons to

change the setting values.

4. Save

After finishing the adjustment, push the SELECT button to memorize the

setting.

5. Return & Exit the main menu

Exit the screen adjustment; push the “MENU”button. When no operation

is done around 30 sec (default OSD timeout), it goes back to the stand-by

mode and no more switching is accepted except MENU to restart the

setting.

Page 8

The Screen Adjustment

Main Menu

You can adjust the brightness, contrast, display colors, the horizontal and

vertical position of the display and OSD menu, etc. through the main menu

display.

The Down Key< and Up Key>are used to scroll through items within the menu.

The selected item is highlighted as the scrolling move along. The SELECT key

is used to activate the highlighted item. During this state, MENU key is used to

close the OSD menu from the screen.

Page 9

Menukey function:

Color Setup the contrast, brightness and color of

the panel. / The Contrast menu item is used

to adjust image contrast.

Picture Setup the image position within the panel.

Function Select auto adjust & auto color function can

make the monitor have the best efficiency.

OSD There many languages can be selected and

setup OSD position

Miscellaneous You can set signal source, mode select, and

volume and restart the setting.

Exit Exit setting.

Page 10

Troubleshooting Tips

In the event that you experience trouble with your Display, check the following

items before contacting the dealer from whom the Display was purchased. The

most common problems usually involve an incorrectly an incorrect connection

from the Video Card to the Display. We recommend that you also consult your

Video Card User’s manual during the Troubleshooting Procedure. Do not

exceed the maximum refresh rate recommended for the display.

Problem Troubleshooting Tip

No image on display

screen 1. Check that power cord of the Computer has been

connected securely into wall outlet or grounded

extension cable or strip.

2. Check that power switch of the Display has been

pressed and LED on the front of Display is lit.

3. Check that Video (Signal) cable from the Display

has been securely and correctly connected.

4. Check that Video Card is firmly seated in card slot

of Computer motherboard.

5. Check that the video input from the Video Card

falls within the timing range.

Abnormal image 1. Check that the video input from the Video Card

falls within the timing range.

2. Check that Video (Signal) Cable from the Display

has been securely and correctly connected to the

Video Connector at the rear side of the Computer.

Colors of image on

screen are abnormal

1. Check that Video (Signal) Cable from the displays

has been securely and correctly connected to the

15-pin Video Connector at the rear side of the

computer.

Disturbances on

Screen 1. OSD adjustment is incorrect. Please consult

section for OSD screen adjustment procedures.

※Please contact your localauthorized distributors /retailers if you runinto other

unsolved problems.

Inhaltsverzeichnis

Andere I-Tech Monitor Handbücher

I-Tech

I-Tech YPM2130-PCAP Bedienungsanleitung

I-Tech

I-Tech UltraView iOP1000AV Bedienungsanleitung

I-Tech

I-Tech KK1500-TR Montage- und Bedienungsanleitung

I-Tech

I-Tech YPM2000PHB Bedienungsanleitung

I-Tech

I-Tech UltraView iOP2600W Bedienungsanleitung

I-Tech

I-Tech UltraView iAP1700 Bedienungsanleitung

I-Tech

I-Tech UltraView iOP1900 Bedienungsanleitung

I-Tech

I-Tech UltraView iAP17W Bedienungsanleitung

I-Tech

I-Tech UltraView iDP1900 Bedienungsanleitung

I-Tech

I-Tech WMRM1500-PCAP Bedienungsanleitung

I-Tech

I-Tech SLR-CH-460-R Bedienungsanleitung

I-Tech

I-Tech iOP-W1900 Bedienungsanleitung

I-Tech

I-Tech MTD-1XXX Bedienungsanleitung

I-Tech

I-Tech NQW922 Bedienungsanleitung

I-Tech

I-Tech EMCMW2380-4K-PCAP-V1 Bedienungsanleitung

I-Tech

I-Tech EMCMW21500HD-PCT-H Bedienungsanleitung

I-Tech

I-Tech SLED6448F-6 Bedienungsanleitung

I-Tech

I-Tech UltraView iOP1500 Bedienungsanleitung

I-Tech

I-Tech UltraView iAP1000 Bedienungsanleitung

I-Tech

I-Tech UltraView iDP-1000AV Bedienungsanleitung

I-Tech

I-Tech Suntronic GS4600 Bedienungsanleitung

I-Tech

I-Tech UltraView iAP26W Bedienungsanleitung

I-Tech

I-Tech ECHW2400HDWT2 Bedienungsanleitung

I-Tech

I-Tech EMCM1900HB-V2 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung