i3TOUCH P5510 Bedienungsanleitung
www.i3-technologies.com
2| Discover more i3 products on www.i3-technologies.com
Important Safety Information
Please read and understand all safety information before installing and using this product. Follow all instructions
marked on the product and described in this, or other documents to ensure a safe use, maintain the full service life,
and bring the best performance of the product into full play. Pay attention to all the usage and installation warnings
and safety precautions. Store this user’s manual near the product for later reference, and to instruct all future users
of this product.
Intended Use
The i3TOUCH units were designed as an interactive touch display, and should only be used as such, as this product
has considered the personal safety factors in its design, and has been tested thoroughly on safety, quality, and
performance before delivery.
Safety Precautions
DANGEROUS VOLTAGE
The lightning flash with arrow head within a triangle is intended to warn that parts inside the product are
a risk of electric shock.
ATTENTION
The exclamation point within a triangle is intended to warn users that important operating and servicing
instructions are mentioned.
Definitions of Safety Terms
The following indicators notify a safety of product warning, caution, or note. Read them carefully when displayed in this
document, or on the product, and heed its instruction.
DANGER indicates an imminent hazard. If you fail to avoid this hazard, it will cause
serious injury or death.
WARNING indicates a potential hazard. If you fail to avoid this hazard, it could cause
serious injury or death.
CAUTION indicates a potential hazard. If you fail to avoid this hazard, it may cause
minor or moderate injury, or may cause property damages.
NOTICE indicates information of special importance.
To prevent electric shocks, do not remove the covers of the unit. There are no user-serviceable parts
inside, and internal servicing should only be performed by qualified, i3 verified personnel. Refer to your
i3 Support contact.
–User Manual | 3
Important Safety Information
WARNING –Electric Safety
Follow all precautions to prevent electric shocks or fire, which could cause serious injury or death.
Do not use a damaged power cord or plug, or a loose power socket. Contact an electrician if you
notice any damages to the wall socket, or the power supply cord.
Do not use multiple products with a single power socket. Parallel powering many devices can fail or
overheat power sockets.
Do not touch the power plug, wall outlet, power cord, or any other electrical components with wet
hands.
Do not place the product or power cord on, or near heat sources.
Do not place heavy objects on the power cord. This may damage the power cord, which may result
in electric shock or fire. Immediately replace the power cord when any damage is noticed.
CAUTION –Electric Safety
Follow all precautions to prevent electric shocks or fire, which may cause minor to moderate injury, or property damage.
Do not disconnect the power cord while the product is in use. Always properly power down the
display, before disconnecting the power supply, to prevent product damage.
Prefer the power supply cord that is delivered with the unit. Do not use any other power supply
cords before checking (and verifying) its electrical safety compliance.
When disconnecting the power cord from the wall outlet, do not pull the cord. Grip the plug, and
pull the plug straight out the power outlet.
4| Discover more i3 products on www.i3-technologies.com
Important Safety Information
WARNING –Installation
Follow all precautions to ensure a safe installation process, and the later use of the product.
Always have an experienced technician install the wall mount of the display. Installation by
unqualified personnel may result in injury of the installer or user.
Do not install the product in poorly ventilated spaces, such as cabinets or closet. Without effective
ventilation the internal temperature may raise, which can result in product damage, or even fire.
Install the product at least 10 cm away from the wall to allow proper ventilation. Mounting the
product too close to the wall, with other wall mounting methods, may block the ventilation flow to
the intakes.
Keep the plastic packaging and smaller accessories away from children. Children may suffocate, or
swallow the smaller parts.
Do not install the product on unstable surfaces, like insecure shelves or sloped surfaces, etc. The
product may fall and become damage or cause an injury. Using the product in an area with excess
vibration may damage the product, and even cause a fire.
Do not install the product in a location that is exposed to dust, moisture, humidity, oil, or smoke.
Fire or electric shocks may result from excess of these exposures.
Do not expose the product to direct sunlight, heat, or heat sources like radiators or stoves. The
product’s lifespan may be reduced or a fire may result.
CAUTION –Electric Safety
Follow all precautions prevent product or property damage, and prevent minor injury.
Do not drop the product while moving. Before carrying the product, make sure everyone is informed about
the product weight, there is the required amount of personnel to help, and that the carry-path is cleared from
obstacles beforehand.
–User Manual | 5
Important Safety Information
Do not place the product face down. The glass of the display may become damaged.
Make sure that the product is always property supported and secured, to prevent the product from falling.
When installing on a table-mount, make sure that the product is not placed near the edges, where it may fall.
Installing the product in an unusual place (exposed to fine particles, chemical substances, extreme
temperatures, or a public place where the product should operate continuously for a really long period), may
seriously affect its performance.
WARNING –Operation
Follow all precautions to ensure a safe use of the product, and prevent minor, or moderate injuries.
There are high voltages inside the product. Never disassemble, repair or modify the product. Do not open the
external covers, or poke through the ventilation holes with any foreign object. For repairs, contact your
authorized i3 Support contact person.
Before moving the product, turn off the power switch and disconnect the power cord, antenna cable, and all
other connected cables.
If the product generates abnormal sounds, a burning smell, or smoke, disconnect the power cord immediately
and contact your i3 Support contact. Do not continue to use the product.
Do not let children hang from the product, or climb on top of it. Children may become injured or seriously
harmed.
If the product is dropped or the outer case is damaged, turn off the power switch and disconnect the power
cord. Then, contact your i3 Support contact, and do not continue to use the product. Continued use may result
in fire or electric shock.
During a lightning or thunder storm, power off the product and remove the power cable from the wall outlet.
A fire or electric shock may be cause by a lightning strike.
Do not drop object on the product, or have products force impact.
Do not lift or move the product by pulling the power cord or any other cable. Product failure, electric shocks
or fire may result from damaged cables or parts.
6| Discover more i3 products on www.i3-technologies.com
Important Safety Information
Do not use or keep combustible sprays or inflammable substances near the product. An explosion or fire may
result.
CAUTION –Operation
Follow all precautions to ensure a safe use of the product, and prevent product or property damages.
Leaving the screen fixed on a stationary image for an extended period of time may cause image
burn-in or defective pixels. Activate Power-Saving Mode or a moving picture screensaver if you will
not be using the product for a while.
Disconnect the power cord from the power socket if you do not plan on using the product for a
longer time. Dust accumulation with heat can cause a fire, electric shocks, or electric leakage.
Use the product at the recommended resolution and frequency, to prevent eye strain. Caution
should also be taken with the use near persons with an epileptic condition. These persons may
experience seizures when viewing certain kinds of flashing lights or patterns.
Do not hold the product upside-down or move it by holding the stand. The product may fall and
become damaged and may cause an injury.
Do not use humidifiers, stoves, or air-conditioning around the product. It may cause fire or electric
shocks.
Do not place heavy objects on the product. Product or installation failure may happen, which can
result in personal injury.
–User Manual | 7
Unboxing
Remove packaging materials
The i3TOUCH is always packed on a pallet, combined with packing lint. Move the box
to an open location before you remove the packing lint around the box. You cannot
move the box anymore when these lints are cut.
Be careful not to damage the product when you open the packaging with sharp tools.
Open the box
Use the openings in the box to lift and remove the top of the box.
Unpack the smaller contents of the box. Check the table
below and verify if all accessories are included in the box.
Remove the styrofoam and plastic bag from the product.
Storage
Store the packaging of the i3TOUCH in a dry location, so that the packaging can be used to move or relocate the
product in the future.
Verify contents
i3TOUCH display
*
Power Cord
USB cable 3m
HDMI cable 3m
*
Remote control + batteries
Stylus holder
Stylus x2
Wi-Fi USB dongle
User Manual
Screws
* Components may differ in different locations.
8| Discover more i3 products on www.i3-technologies.com
Product Overview
Dimensions
(The following dimensions are not necessarily to scale. Some dimensions are subject to change without notice. Refer to the
dimensions on product sheets prior to installing the product.)
(Unit: mm)
Model Name
1
2
3
4
5
VESA hole
(AxB)
1280.0
781.0
1212.0
683.0
96
400x400
1498.2
894.2
1430.0
806.0
103
400x600
1801.2
1090.2
1650.9
920.9
109
400x600
2040.2
1242.2
1875.0
1056.0
120
400x600
–User Manual | 9
Product Overview
Main Features
Display Technology
The i3TOUCH Premium series displays consists of a (LED/TFT) LCD panel and microprocessor-controlled main board.
It is designed to meet the demanding and rigid performance requirements of education, schools, public premise,
corporate and industrial applications.
Power Switch
The power supply and the power switch are located at the bottom of the display.
10 | Discover more i3 products on www.i3-technologies.com
Product Overview
I/O Interface
The touch display’s input and output connectors are located at the rear, on the left side and bottom of the display.
They are shown in the images below and described in the following paragraphs. Please note that connectors may vary
in some derivate models. Please refer to the individual product sheets for verification.
Bottom ports
Side ports
VGA IN
Audio IN 3.5mm jack
AV OUT
YPbPr IN
AV IN
SPDIF OUT
Audio Out 3.5mm jack
RS232 IN
Touch USB (HDMI 2, VGA, DP)
LAN IN
LAN OUT
DisplayPort IN
HDMI 2 IN (ARC)
HDMI 1 IN (MHL)
USB 3.0
USB 3.0
HDMI OUT
Touch USB (HDMI 1)
Power Button (hold)
Menu Button (press)
Dieses Handbuch passt für folgende Modelle
3
Inhaltsverzeichnis
Andere i3TOUCH Touchscreen Handbücher
Beliebte Touchscreen Handbücher anderer Marken
IBASE Technology
IBASE Technology ASTUT-152-RE1S Bedienungsanleitung
YASKAWA
YASKAWA TP 610C Bedienungsanleitung
B&R
B&R Power Panel C Series Bedienungsanleitung
Beijer Electronics
Beijer Electronics X2 control Bedienungsanleitung
AXIOMTEK
AXIOMTEK GOT321W-521 Bedienungsanleitung
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Bedienungsanleitung
