IAdea XMP-3450 Bedienungsanleitung

XMP-3450 User’s Manual

Contents

XMP-3450 User’s Manual 0

1. Introduction 1

1.1. Features 1

1.2. Package contents1

1.3. Mounting options 1

1.4. Physical view 2

2. Configuring the XMP-3450 Media Player 3

2.1. System connections 3

2.2. USB keyboard configuration menus 3

2.3. Connect the XMP-3450 to your network 4

2.4. Video output settings 5

2.5. Clock and calendar settings 5

2.6. Setting a password 5

2.7. Factory reset 6

2.8. Applying firmware upgrades 6

2.9. Video input 6

3. Content Management 7

4. Authoring in HTML5 7

5. Working with SMIL 7

5.1. Introduction 7

5.2. www.a-smil.org for developers 7

6. Technical Data 8

6.1. Specifications 8

7. Appendix: FAQ 9

1. Introduction

This document describes the hardware and software operations of the XMP-3450, system set up, and frequently

asked questions.

1.1. Features

The XMP-3450 is a Full-HD 1080p high definition digital signage player featuring industrial grade mechanical

design and versatile open-standard SMIL programmability.

•AV in for custom live content display

•Full-HD 1080p hardware decoding of MPEG, H.264, and VC-1 media formats

•4GB on-board flash local storage with CF card slot

•Integrated audio and video output via HDMI

•Supports full POPAI Screen Media Formats Standards profiles S1 to S12, and E1 to E9

•Multiple 3rd party software solution compatibility

•Industry leading W3C SMIL support for developers

•Built-in wireless b/g/n network

1.2. Package contents

NOT INCLUDED

1.3. Mounting options

: A USB keyboard is required for system setup

The player can be attached to mounting posts on the back of screens or inside

cabinetry with the built in VESA MIS-D100 (100mmx100mm) compatible

mounting flange

ATTACH the wireless antenna as shown. Screw

antenna clockwise onto the post

Media Player Unit

AC Adapter and

Documentation CD

(select SKUs)

Quick Start

Standard 3.5mm to

RCA AV adapter

Ethernet cable

Software set up guide

(select SKUs)

CF card cover/remover

(pre-installed on unit)

Wi-Fi Antenna

RS-232 adapter

1.4. Physical view

Physical features (left to right in above illustration)

•12V DC for power adapter

•HDMI 1.3a connector for digital video and audio combined outputs,

or digital video via option DVI adapter

•VGA port for analog video output

•3.5mm composite AV output

•S/W Reset button to perform factory reset

•Ethernet port for network content update

•USB ports for USB content update and configuration

•CF card slot cover with integrated CF card removing tool

•RS-232 port

•3.5mm composite AV input

2. Configuring the XMP-3450 Media Player

2.1. System connections

1Attach a video cable (either VGA or HDMI) to your monitor.

When using the VGA connection, your monitor should support XGA (1024x768) resolution or greater. For audio

output, you will also need to connect a stereo RCA cable from the XMP-3450 to your monitor.

When using an HDMI connection, audio is sent along with video over the HDMI cable, so no additional cables are

required.

Reminder: If you do not see anything on screen, check your monitor video input mode.

2Attach the AC power adapter to power on the unit. Shortly afterwards, the following progress bar will be

displayed on your monitor:

3Player boot process takes approximately 90 seconds to complete. The player will indicate that it is ready for

content sync via the USB port or, if content has been loaded, begin playback immediately.

After performing the initial setup as outlined above,

the player will boot into the “Open Standard Media

Player” screen. Plug in a USB keyboard to enter

configuration menus

If you have already loaded media contents into the

player, contents will play back immediately after boot

up, and the “Open Standard Media Player” screen will

not be shown.

2.2. USB keyboard configuration menus

You can still plug in a USB keyboard at

any time during playback to enter the menu system.

You must attach a USB keyboard to the XMP-3450 to configure settings. With the player booted up and ready, it

takes approximately 30 seconds after you plug in the keyboard for the following menu to be displayed:

Troubleshooting Tips

1The operation indicators light up, but no video is displayed on screen.

•Ensure that your video cable (VGA or HDMI) is securely connected. When using an HDMI

connection, choose high quality, certified HDMI cables or try using shorter length cables.

•Check if your monitor is turned-on and switched to the corresponding video input source.

2No sound is heard.

•If using VGA connection, you also need to connect RCA audio cables.

•Check volume (mute) settings on monitor.

~ 90 seconds

Navigating the menus

Navigate the menus using arrow keys, space bar, enter key, and numeral keys on your USB keyboard. Use the

keyboard arrow keys to highlight menu items, press the space bar to move the star (cursor), and then press enter

2.3. Connect the XMP-3450 to your network

to confirm (<OK>) or reject (<Cancel>) any changes.

Enter Network setting in the menu to set up a network connection method.

Wireless connection

The player will scan for wireless signals nearby during boot up. If the network requires

authentication, you will be asked to provide the password for access.

Wired connection

To use the wired Ethernet connection, connect an Ethernet cable and the Wi-Fi will be

disabled.

Player IP address

You will also need an IP address for the player on your network. This could be set automatically (DHCP) or

manually (static IP):

DHCP – automatically assign network IP address

DHCP is enabled by default. You do not need to change the

settings unless setting a static IP.

Static IP – manually assign network IP address

Highlight “IP configuration” and press “Enter” on keyboard to

Move the highlight to “Static IP” below, press “Space bar” on

the keyboard to fill in the star (*) at the Static IP brackets, and

press “Enter” on the keyboard to select <OK>.

Proceed to configure an available static IP address. Select Wireless

configuration or IP configuration as determined by your connection.

Please consult your network administrator for assistance if necessary.

2.4. Video output settings

For best quality, set the output resolution to match your display’s native resolution to avoid image scaling and

blur.

If you are connecting to an LCD TV, the resolution setting is most likely 1366x768, 1280x720, or 1920x1080. If you

are connecting a LCD computer monitor, projector, or plasma display, refer to the device specifications for the

best matching setting.

Press the space bar to fill in the star (*)

before pressing the enter key for <OK>.

2.5. Clock and calendar settings

Set the correct time zone, time, and date.

Daylight Saving (DST) rules can be configured

in Set time zone.

2.6. Setting a password

To prevent unauthorized modification of player settings, set a player

password to hide the menu.

From the top level menu, select “Change password” to set a password.

IMPORTANT: Once a password is set, you can only access the menus by

connecting a USB keyboard and pressing CTRL + ALT + DELETE (3-key

combination) simultaneously. You may connect the keyboard at any

stage of player operation or before/ during boot-up.

If you forget the password, you will need to reset the device. See

Factory reset.

2.7. Factory reset

If you forget a system password you have set, you must reset the system to regain access to the player.

Using the reset button

1PRESS and HOLD the reset button with a pin

2RE-CONNECT the power cord

3WAIT about 8 seconds or until the status LED flashes

4RELEASE reset button and wait for system to initialize

Using a USB keyboard

System reset will re-initialize the system, clear passwords, and return settings to their default values. Perform the

following:

1CONNECT USB keyboard

2REBOOT the player and look for the reset instructions on the top left corner of the screen. When it appears,

PRESS the Delete key on your keyboard

If you missed the reset window, unplug power and try again

3You should see a menu with a reset confirmation dialogue box. SELECT Yes to confirm

4WAIT while system reboots to complete reset

2.8. Applying firmware upgrades

Firmware updates can be performed using a USB flash drive. Please read the release notes carefully regarding the

changes that will be made to your player before applying the upgrade

1DOWNLOAD the latest firmware and copy it to the root directory of a USB drive from www.digisignage.com

2PLUG the power cord into the device

3PLUG a USB keyboard to the device to enter menu system

4Follow on screen instructions and SELECT firmware upgrade option in the menu

5When instructed, PLUG IN the USB drive to begin firmware upgrade

2.9. Video input

The AV in port lets you attach TV tuners, live video camera signals, pre-recorded videos, and more via the 3.5mm

composite video/audio cable.

NTSC/PAL mode is selected automatically.

Also refer to your software documentation to enable display.

Reset button

3. Content Management

The XMP-3450 is designed to work with 3rd party management solutions. Please refer to the printed guide for

related set up instructions.

4. Authoring in HTML5

A major advancement in the XMP-3250/3350 media appliance is the ability to playback HTML5 content which can

contain dynamic information.

To find out more about using HTML5 for digital signage, visit http://widget.iadea.com.

5. Working with SMIL

The XMP-3450 uses open communications protocols for content presentation and playback control. SMIL-

compliance means predictable results across multiple devices, and SMIL’s non-proprietary nature means that

your investments are never obsolete.

5.1. Introduction

Using SMIL (pronounced “smile”), the language created by W3C for multimedia

communications, the media player understands the language “spoken” by professional

tools from companies such as Adobe, Apple, Microsoft, and Real Networks. What this

means is quicker, easier, and better integration of your players into your digital signage

networks, opening up avenues of software controls and realizing the full potential of

your player hardware down the road.

5.2. www.a-smil.org for developers

The media player operating system utilizes W3C SMIL as the underlying scripting language, which lends well to

customization to your project management needs. For resources, downloads, and community support, please

visit www.a-smil.org.

6. Technical Data

6.1. Specifications

XMP-3450

Video format support POPAI Screen Media Standards

S6 (MPEG-1 SIF, 3Mbps CBR)

S7 (MPEG-1 480p, 10Mbps CBR)

S8 (MPEG-1 720p, 15Mbps CBR)

S9 (MPEG-2 480p, 6Mbps CBR)

S10 (MPEG-2 720p, 12Mbps CBR)

S11 (MPEG-4 AVC, 480p, 6Mbps CBR)

S12 (MPEG-4 AVC, 720p, 10Mbps CBR)

E4 (VC-1/WMV9, MP@ML, 720p)

E5 (VC-1/WMV9, MP@HL, 1080p)

E6 (MPEG-2, 1080p, 20Mbps CBR)

E7 (MPEG-4 ASP, 480p, 10Mbps CBR)

E8 (MPEG-4 AVC, 1080p, 20Mbps CBR)

Image format support POPAI Screen Media Standards

S1 (JPEG 480p baseline)

S2 (JPEG 720p baseline)

S3 (JPEG 1080p baseline)

E1 (PNG 24bpp+alpha, 480p)

E2 (PNG 24bpp+alpha, 720p)

E3 (PNG 24bpp+alpha, 1080p)

Audio codec support POPAI Screen Media Standards

S4 (MPEG L2 audio)

S5 (MP3 audio, 320Kbps)

Playback control W3C SMIL 3.0 instructions (sub-set)

Content management 3rd party solution

Physical I/O connectors HDMI 1.3

VGA

3.5mm AV out

3.5mm AV in

RJ45 Ethernet

USB 2.0

WLAN antenna port

RS-232 port

Local storage 4GB on-board flash memory (up to 1.8 hrs of 5 Mbps high def.

video)

CF card expansion slot

Accessories 3.5mm-RCA AV cable

Ethernet cable

WLAN antenna

RS-232 adapter

Power requirement 12V 1.5A DC

Power consumption* 8 watts max (when playing 1080P full resolution video)

Environmental Operating temperature: 0 – 40° C / 32 – 104° F

Humidity: 5 – 85% @ 40° C / 32 – 104° F non-condensing

Dimensions 211x153x 43mm (8.3 X 6 X 1.7 inches)

Andere Handbücher für XMP-3450

Inhaltsverzeichnis

Andere IAdea Tragbarer Multimedia-Player Handbücher

IAdea

IAdea XDS-2170 Bedienungsanleitung

Beliebte Tragbarer Multimedia-Player Handbücher anderer Marken

Epson

Epson P3000 - Digital AV Player Abmessungen

VIETA

VIETA VM-HS247BK Bedienungsanleitung

Epson

Epson P6000 - Multimedia Photo Viewer Bedienungsanleitung

Apantac

Apantac Tahoma LE-4 Bedienungsanleitung

Polaroid

Polaroid PMP120-4 Bedienungsanleitung

Creative

Creative ZEN Vision Bedienungsanleitung

Mattel

Mattel Juice Box Bedienungsanleitung

Creative

Creative ZEN Vision Bedienungsanleitung

Denon

Denon HEOS Amp Bedienungsanleitung

Espow

Espow RM Bedienungsanleitung

Philips

Philips HMP3000 Bedienungsanleitung

Archos

Archos 604 - Digital AV Player Bedienungsanleitung

Aigo

Aigo MV5920 Bedienungsanleitung

Yoo Digital

Yoo Digital YOOMOVE 2401 Bedienungsanleitung

Cowon

Cowon iAUDIO CW200 Bedienungsanleitung

Kodak

Kodak mc3 Bedienungsanleitung

Shiro

Shiro VJ Bedienungsanleitung

Philips

Philips GoGear SA3085/02 Bedienungsanleitung