iBasso Audio DX300 Bedienungsanleitung
iBasso Audio
USER GUIDE
Gain
Android Basic Features Introduction
WiFi Connection/Bluetooth Connection
Contents
Package Components
Main Features
Specifications
Names of Parts & Functions
7-8
5-6
2-4
9-13
14-25
15-16
Application (APP) Installation/App， to Uninstall/USB Connections
17-20
Power Off/Reboot/System Switching 26
System Settings 21-25
iBasso Mango Music Player Application 27-59
Playback Screen (home screen) 27
Music Screen 28-38
Settings Screen 39-58
System Switching 59
Mango OS 59-62
MQA 63
Mango OS User Interface 60
To Return to The Android System 61
MTP 62
USB-C cable Screen Protector
Quick Start Guide Warranty Card
2
Package Components
Coaxial Cable Balanced Burn-in Cable
Leather CaseDX300 Player
3
USB-C Cable：
Coaxial Cable：
Connect the coaxial cable to an external DAC, to allow
the DX300 to work as a digital transport.
Connect the USB-C cable to a computer for charging,
data transfer, and USB-DAC function.The USB-C cable
can also be used with a USB charger to charge the
battery.
Leather Case：
Use the leather case to protect the DX300 chassis from
scratches.
Screen Protector：
Use the screen protector to protect the DX300 screen
from scratches.
Warranty Card：
The warranty will be requested at the time of warranty
repair. Please retain the warranty card.
Quick Start Guide:
This reviews the basic functions of the DX300.
Balanced Burn-in Cable：
Plug the burn-in cable into the output socket and keep
playing music to burn-in the DX300. The burn-in process
helps the DX300 sound reach its full potential by forming
the capacitors and stabilizing the electronic components
used.
4
Tips for burn-in
The use of the cable is very straightforward. The burn-in
cable is used to form the capacitors and to condition the rest
of the circuitry. The method for burn-in is to use normal
resolution music, as higher resolution causes more heat due
to the higher demand on the system. Also, use a normal
listening volume, as the higher volume will have a higher
power consumption therefore more heat will be generated.
While burning in the DX300, both the balanced and the single
ended components are being affected and burned in.
The burn-in time can be from 100 to 200 hours and the
burn-in doesn't have to be continual. You can power off the
player and continue the burn-in process after a few days. It
is also not mandatory to use the burn-in cable, we supply it
as a convenience for when you are not listening to the DX300
and you would like to get your dap conditioned as soon as
possible. You can also just listen to the player and enjoy the
music as your player goes through this process while playing
through IEMs or headphones.
5
Main Features
-Quad Cirrus Logic CS43198 DAC Chips are incorporated,
with a four-channel balanced headphone amplification circuit.
-Bit for Bit playback with support up to 32bit/384kHz.
-Support of Native DSD up to 256x.
-6.5″ IPS full screen (1080*2340), with In-Cell capacitive
touch panel.
-Support of QC3.0 and PD2.0 quick charge.
-2 Accusilicon ultra-low phase noise Femtosecond
oscillators.
-USB DAC function that supports up to 32bit/384kHz and
DoP DSD128.
-14nm Octa-Core Qualcomm Snapdragon 660 SoC.
-USB digital output that outputs up to PCM 32bit/384kHz,
Native DSD256, and DoP DSD128
-6GB LPDDR4X + 128GB ROM.
-Mini coaxial output that supports up to 24bit/384kHz and DoP
DSD128.
-Support of 5G WiFi with 2x2 MIMO antenna and Bluetooth 5.0.
-Support SDXC and SDHC Micro SD cards.
-Support USB3.1 Superspeed transfer.
6
-3 settings for hardware gain control.
-100 steps for volume control.
-Patented replaceable AMP card design.
-Audio Formats Supported: MQA, APE, FLAC, WAV, WMA, AAC,
ALAC, AIFF, OGG, MP3, DFF, DSF, and DXD.
-Support for M3U playlists.
-Patented dual battery power structure with dedicated power
management for each battery. 4000mAh 3.8V Li-Polymer
battery for the digital section and 2000mAh 3.8V Li-Polymer
battery for the AMP card section.
7
Specifications
Maximum output level：
Output Power：
Frequency Response：
S/N：
Dynamic Range：
THD+N：
Crosstalk：
Output impedance：
Maximum output level：
Output Power：
Frequency Response：
S/N：
Dynamic Range：
THD+N：
Crosstalk：
Output impedance：
7.1Vrms
1240mW@32ohm, 168mW@300ohm
10Hz~40kHz +/-0.3dB
125dB
125dB
-113dB (no Load, 3Vrms)
-109dB (300R Load)
-101dB (32R Load)
-120dB
0.39ohm
3.5Vrms
350mW@32ohm, 34mW@300ohm
10Hz~40kHz +/-0.3dB
123dB
123dB
-111dB (no Load, 2Vrms)，
-107dB (300R Load)
-95dB (32R Load)
-103dB
0.43ohm
4.4mm/2.5mm Balanced Phone Port：
3.5mm Single Ended Phone Out:
8
15hours
((The play time varies with different
resolutions, volume used and headphone/IEM
loads.)
Average Play Time:
Maximum output level：
Frequency Response：
S/N：
Dynamic Range：
THD+N：
Crosstalk：
Maximum output level：
Frequency Response：
S/N：
Dynamic Range：
THD+N：
Crosstalk：
7.1Vrms
10Hz~40kHz +/-0.3dB
125dB
125dB
-111dB (no Load, 3Vrms)
-119dB
3.5Vrms
10Hz~40kHz +/-0.3dB
123dB
123dB
-111dB (no Load, 2Vrms)，
-103dB
4.4mm/2.5mm Balanced Line Out：
3.5mm Single Ended Line Out：
9
Names of Parts & Functions
Coaxial Output Port
Micro SD
4.4mm Balanced
2.5mm Balanced
USB-C Port
3.5mm Single Ended
Amp Card
Inhaltsverzeichnis
Andere iBasso Audio Drehscheibe Handbücher
