IBM 4-Port 10/100 Base-TX Ethernet PCI Leitfaden

4-Port 10/100 Base-TX Ethernet PCI Adapter

Installation and Using Guide

SA23-2567-02

Third Edition (September 2001)

Before using this information and the product it supports, read the information in “Safety Information” on page v and

“Appendix B. Notices” on page 25.

A reader’s comment form is provided at the back of this publication. If the form has been removed, address comments

to Publications Department, Internal Zip 9561, 11400 Burnet Road, Austin, Texas 78758-3493. To send comments

electronically, use this commercial internet address: [email protected]. Any information that you supply may

be used without incurring any obligation to you.

Note to U.S. Government Users Restricted Rights--Use, duplication or disclosure restricted by GSA ADP Schedule

Contract with IBM Corp.

Note

Before using this information and the product it supports, be sure to read the general information

under ″Product Warranties and Notices″included with your system unit.

Contents

Safety Information.......................v

Handling Static Sensitive Devices.................vii

About This Book .......................ix

ISO 9000 ..........................ix

Related Publications ......................ix

Trademarks .........................ix

Chapter 1. Overview ......................1

Understanding the Adapter LEDs ..................1

Software Requirements .....................2

Chapter 2. Preparing for Installation ................3

Verifying Your Hardware Requirements ................3

Checking Prerequisites .....................3

Chapter 3. Installing the Device Driver Software ............5

Chapter 4. Installing the Device Driver on the RS/6000 SP System......7

Checking System Prerequisites...................7

Installing Software on the Control Workstation .............10

Installing Device Drivers on the SP Nodes...............11

Chapter 5. Updating System Firmware ...............13

Chapter 6. Installing the 4-Port 10/100 Base-TX Ethernet PCI Adapter ....15

Installing the Adapter......................15

Verifying the Installation .....................15

Verifying Adapter Hardware Installation...............15

Verify AIX Software Installation .................16

Running Adapter Diagnostics ...................17

Chapter 7. Connecting to an Ethernet Network ............19

Connecting the Network Cables and Adapter ..............19

Appendix A. Communications Statements ..............21

Federal Communications Commission (FCC) Statement ..........21

European Union (EU) Statement ..................21

International Electrotechnical Commission (IEC) Statement .........22

United Kingdom Telecommunications Safety Requirements .........22

Avis de conformité aux normes du ministère des Communications du Canada. . . 22

Canadian Department of Communications Compliance Statement .......22

VCCI Statement .......................22

Electromagnetic Interference (EMI) Statement - Taiwan ..........23

Radio Protection for Germany ...................23

iii

Appendix B. Notices .....................25

iv 4-Port 10/100 Base-TX Ethernet PCI Adapter: Installation and Using Guide

Safety Information

DANGER

An electrical outlet that is not correctly wired could place hazardous voltage

on metal parts of the system or the devices that attach to the system. It is the

responsibility of the customer to ensure that the outlet is correctly wired and

grounded to prevent an electrical shock.

Before installing or removing signal cables, ensure that the power cables for

the system unit and all attached devices are unplugged.

When adding or removing any additional devices to or from the system,

ensure that the power cables for those devices are unplugged before the

signal cables are connected. If possible, disconnect all power cables from the

existing system before you add a device.

Use one hand, when possible, to connect or disconnect signal cables to

prevent a possible shock from touching two surfaces with different electrical

potentials.

During an electrical storm, do not connect cables for display stations, printers,

telephones, or station protectors for communications lines.

vi 4-Port 10/100 Base-TX Ethernet PCI Adapter: Installation and Using Guide

Handling Static Sensitive Devices

Attention: Static electricity can damage this device and your system unit. To avoid

damage, keep this device in its anti-static protective bag until you are ready to install it.

To reduce the possibility of electrostatic discharge, follow the precautions listed below:

vLimit your movement. Movement can cause static electricity to build up around you.

vHandle the device carefully, holding it by its edges or its frame.

vDo not touch solder joints, pins, or exposed printed circuitry.

vDo not leave the device where others can handle and possibly damage the device.

vWhile the device is still in its anti-static package, touch it to an unpainted metal part

of the system unit for at least two seconds. (This drains static electricity from the

package and from your body.)

vRemove the device from its package and install it directly into your system unit

without setting it down. If it is necessary to set the device down, place it on its

static-protective package. (If your device is an adapter, place it component-side up.)

Do not place the device on your system unit cover or on a metal table.

vTake additional care when handling devices during cold weather, as heating reduces

indoor humidity and increases static electricity.

vii

viii 4-Port 10/100 Base-TX Ethernet PCI Adapter: Installation and Using Guide

About This Book

This book provides information about installing the 4-Port 10/100 Base-TX Ethernet PCI

Adapter and device driver support software, as well as how to attach the adapter to a

network. Use this book in conjunction with your specific system unit and operating

system documentation.

ISO 9000

ISO 9000 registered quality systems were used in the development and manufacturing

of this product.

Related Publications

The following publications contain related information:

vSystem unit documentation for information specific to your hardware configuration

vOperating system documentation for information specific to your software

configuration. This documentation is located on the AIX V4.3 Documentation CD. The

documentation information is made accessible by loading the documentation CD onto

the hard disk or by mounting the CD in the CD-ROM drive.

PCI Adapter Placement Reference

, SA38-0538 (for the latest version, you may need

to contact your marketing representative)

Trademarks

The following terms are trademarks of International Business Machines Corporation in

the United States, other countries, or both:

vAIX

vRS/6000

vSP

Other company, product, and service names may be trademarks or service marks of

others.

x4-Port 10/100 Base-TX Ethernet PCI Adapter: Installation and Using Guide

Inhaltsverzeichnis

Andere IBM Adapter Handbücher

IBM

IBM iSCSI Host Bus Adapter Bedienungsanleitung

IBM

IBM ServeRAID Bedienungsanleitung

IBM

IBM 10/100/1000 Base-T Ethernet PCI Leitfaden

IBM

IBM Gigabit Fibre Channel PCI Leitfaden

IBM

IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter Leitfaden

IBM

IBM PCI WAN 2 Port S91 Bedienungsanleitung

IBM

IBM Remote Supervisor Adapter II Bedienungsanleitung

IBM

IBM 5-1/4" Diskette Drive Adapter Anwendungshandbuch

IBM

IBM Netfinity Bedienungsanleitung

IBM

IBM EN2024 Bedienungsanleitung

IBM

IBM ThinkPad i Series Bedienungsanleitung

IBM

IBM 64-bit/66MHz PCI ATM MMF Leitfaden

IBM

IBM 16/4 Token-Ring Bedienungsanleitung

IBM

IBM RedbooksQLogic 8200 Bedienungsanleitung

IBM

IBM NetXtreme II 1000 Bedienungsanleitung

IBM

IBM OpenCAPI Bedienungsanleitung

IBM

IBM TURBOWAYS 622 PCI MMF ATM Leitfaden

IBM

IBM SSA 32H3816 Bedienungsanleitung

IBM

IBM SuperSerial SST128P Handbuch

IBM

IBM PCI Dual Channel Ultra3 SCSI Adapter Leitfaden

IBM

IBM 10/100 EtherJet CardBus Adapter Technisches Handbuch

IBM

IBM Emulex Bedienungsanleitung

IBM

IBM Power System 8247-21L Bedienungsanleitung

IBM

IBM USB Serial Parallel Adapter Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung