IBM OPTIONS Bedienungsanleitung

IBM PCI Ultra160

SCSI Adapter

User’s Guide



OPTIONS

by IBM

Note: Before using this information and the product it supports, read the information

under Appendix F, ″Product warranties and notices″on page F-1.

First Edition (August 2000)

US Government Users Restricted Rights – Use, duplication or disclosure restricted by

GSA ADP Schedule Contract with IBM Corp.

Contents

About this book .....................v

Safety: Read first ....................vii

Part 1: Quick installation guide...............1-1

Part 2: Installation and user’s guide .............2-1

Appendix A. Product specifications .............A-1

Appendix B. Using SCSISelect ...............B-1

Appendix C. Configuring multiple SCSI adapters ........C-1

Appendix D. Problem solving ...............D-1

Appendix E. Help and service information ...........E-1

Appendix F. Product warranties and notices ..........F-1

iv IBM PCI Ultra160 SCSI Adapter: User’s Guide

About this book

This manual contains instructions for installing, configuring, and

troubleshooting the IBM®PCI Ultra160 SCSI Adapter. The manual is divided

into three parts:

Part 1: Quick installation guide

This guide contains abbreviated installation instructions.

Part 2: Installation guide

This guide contains the product description and expanded installation

instructions in the following languages:

vEnglish

vFrench

vSpanish

vItalian

vBrazilian Portuguese

vTraditional Chinese

vSimplified Chinese

vJapanese

Part 3: Appendixes

The appendixes contain product specifications, SCSISelect, configuring multiple

host, problem solving, and help and service. It also contains the product

warranties and notices.

Note: The illustrations in this manual might be slightly different from your

hardware.

Registering your option

Thank you for purchasing OPTIONS by IBM. Please take a few moments to

better serve you in the future. Your feedback is valuable to us in developing

products and services that are important to you, as well as in developing better

ways to communicate with you. Register your option on the IBM Web site at

http://www.ibm.com/pc/register

IBM will send you information and updates on your registered product unless

you indicate on the Web site questionnaire that you do not want to receive

further information.

vi IBM PCI Ultra160 SCSI Adapter: User’s Guide

Safety: Read first

Before installing this product, read the Safety Information.

Antes de instalar este produto, leia as Informações de Segurança.

Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.

Læs sikkerhedsforskrifterne, før du installerer dette produkt.

Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety

Information.

Avant d’installer ce produit, lisez les consignes de sécurité.

Vor der Installation dieses Produkts die Sicherheitshinweise lesen.

Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.

Les sikkerhetsinformasjonen (Safety Information) før du installerer dette

produktet.

Antes de instalar este produto, leia as Informações sobre Segurança.

red inštaláciou tohto zariadenia si pečítaje Bezpečnostné predpisy.

Antes de instalar este producto lea la información de seguridad.

Lässäkerhetsinformationen innan du installerar den här produkten.

Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.

viii IBM PCI Ultra160 SCSI Adapter: User’s Guide

Part 1: Quick installation guide

The IBM®PCI Ultra160 SCSI Adapter is designed to attach a small computer

system interface (SCSI) to a computer that has an available peripheral

component interconnect (PCI) expansion slot. After the adapter is installed,

SCSI devices can be attached to the external SCSI connector. In addition to this

User’s Guide, the option package contains:

vThe 29160LP SCSI Adapter

vOne 68-pin, internal SCSI cable for connecting five 16-bit internal Wide

devices

vOne 4-pin internal LED cable

vThe option CD, which contains the EZ-SCSI and 7800 Family Manager Set

device driver and utility packages

vThe IBM Safety Information Book

This section contains abbreviated installation instructions. If you are familiar

with SCSI products and are experienced in installing options, use these

instructions. For a description of the SCSI adapter and more detailed

information about how to install it see “Part 2: Installation and user’s guide”

on page 2-1. To install the SCSI adapter, do the following:

1. Set a unique SCSI ID for each device you are connecting to the SCSI chain.

The adapter supports SCSI IDs from 0 to 15. The SCSI ID of the SCSI

adapter is 7.

2. Turn off all attached devices; then turn off your computer. Unplug the

power cords and all attached devices. Remove the cover from your

computer. For instructions on how to remove the computer cover, refer to

the documentation that comes with your computer.

3. Before opening the static-protective bag containing the SCSI adapter, touch

the bag to an unpainted metal surface on your computer for at least two

seconds.

4. Remove the adapter from the static-protective bag. If you must put the

adapter down, place it on the static-protective bag.

The following is an illustration of the SCSI adapter:

168-pin Internal LVD/SE Connector 468-pin External VHDCI Connector

2External LED connector 5mounting screws

3PCI bus card-edge connector 6bracket

5. Locate an available 32-bit or 64-bit PCI expansion slot. These slots are

shorter than ISA or EISA slots.

6. If you have a newer, lower-profile computer, you will need to use the

smaller mounting bracket that comes with the adapter. To install it,

reference the illustration and do the following:

a. Remove the mounting screws that attach the bracket to the adapter.

b. Remove the standard bracket.

c. Position the low-profile bracket on the bracket aligning the screw holes

in the bracket with the holes in the PCI adapter.

d. Insert the two screws and carefully tighten the screws. Do not

overtighten.

7. Remove the bracket screw and the metal expansion slot cover.

8. Insert the connector of the adapter, (P1 in the above illustration) into the

PCI connector.

9. Press the SCSI adapter into place and secure it with the bracket screw.

10. The internal SCSI cable included in this option package has an adaptive

terminator at the end. This terminator serves as the termination device for

all SCSI devices that are attached to the cable. Remove or disable

termination from all other devices on the SCSI cable.

11. If needed, set the SCSI adapter termination. Termination of the SCSI

adapter is controlled by software commands using the SCSISelect utility

program. The initial termination setting for the SCSI adapter is Automatic.

With this setting, the adapter detects the bus cables attached and sets

proper termination settings. If you want to manually set the termination

for the SCSI adapter, see “Appendix B. Using SCSISelect”on page B-1.

1-2 IBM PCI Ultra160 SCSI Adapter: User’s Guide

Inhaltsverzeichnis

Andere IBM Adapter Handbücher

IBM

IBM Gigabit Fibre Channel PCI Leitfaden

IBM

IBM Emulex Virtual Fabric Adapter Bedienungsanleitung

IBM

IBM FC5022 Bedienungsanleitung

IBM

IBM Brocade Bedienungsanleitung

IBM

IBM EN2024 Bedienungsanleitung

IBM

IBM TOKEN-RING PCI FAMILY ADAPTER Bedienungsanleitung

IBM

IBM 10/100 Mbps Ethernet PCI Adapter II Leitfaden

IBM

IBM Flex System EN4132 Bedienungsanleitung

IBM

IBM Power GXT800P Bedienungsanleitung

IBM

IBM ThinkPad 600 Bedienungsanleitung

IBM

IBM Netfinity Bedienungsanleitung

IBM

IBM 5-1/4" Diskette Drive Adapter Anwendungshandbuch

IBM

IBM 16/4 Token-Ring Bedienungsanleitung

IBM

IBM Netfinity ServeRAID-3H Bedienungsanleitung

IBM

IBM 57D7 Bedienungsanleitung

IBM

IBM Netfinity 10/100 Ethernet Adapters Bedienungsanleitung

IBM

IBM 37L1414 Bedienungsanleitung

IBM

IBM ThinkPad i Series Bedienungsanleitung

IBM

IBM Netfinity Fibre Channel PCI Adapter Bedienungsanleitung

IBM

IBM FC EJ08 Bedienungsanleitung

IBM

IBM PCI WAN 2 Port S91 Bedienungsanleitung

IBM

IBM 4-Port 10/100 Base-TX Ethernet PCI Leitfaden

IBM

IBM RedbooksQLogic 8200 Bedienungsanleitung

IBM

IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter Leitfaden

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung