IBM N2225 Bedienungsanleitung

Quick Installation Guide

N2225 and N2226 SAS/SATA HBAs for IBM System x

N2225

N2226

Thank you for purchasing the

N2225 HBA and/or N2226 HBA.

Please take a few minutes to read

this quick installation guide

before you install the HBAs.

For more information about any

topic covered in this guide, refer

to the N2225and N2226

SAS/SATA HBAs IBM System x

Hardware User’s Guide.

To install the N2225 HBA or the N2226 HBA, follow these steps:

1. Unpack the HBA, and inspect it for damage. Unpack the HBA in a static-free environment.

Touch the static-protective package that contains the HBA to any unpainted surface on the

outside of the server; then, grasp the HBA by the top edge or upper corners, remove it from

the package, and inspect it for damage. Contact your IBM marketing representative or

authorized reseller if the HBA appears to be damaged.

2. Prepare the server. Turn off the server, and remove the power cord from the rear of the

power supply.

3. Remove the cover from the chassis.

4. Check the mounting bracket on the HBA (system-dependent). If required for your

system, replace the full-height mounting bracket that ships on the HBA with the low-profile

bracket supplied. Save and reuse the two screws that attach the long bracket to attach the

short bracket.

ATTENTION: Make a backup of your data before changing your system

configuration to avoid the risk of data loss.

First Edition April 2014

IBM, the IBM logo, ibm.com, and System x are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide.

Printed in USA

US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

IBM P/N: 00FH246

5. Insert the HBAs in an available PCIe® slot. Locate an empty x8 PCIe slot. Remove the blank bracket

panel on the rear of the computer that aligns with the empty PCIe slot. Save this bracket screw, if

applicable. Align the HBA to a PCIe slot. Press down gently, but firmly, to seat the HBA correctly in the

slot. The following figures show how to insert the HBAs into the available PCIe slots.

Insert an N2225 HBA in a PCIe Slot

6. Secure the HBA bracket to the system chassis. Install the bracket screw, if applicable, or engage

the system retention mechanism to secure the HBA to the system chassis.

7. Connect the auxiliary power cable to the HBA only if auxiliary power is required with your

system design. This step is applicable for the N2226 HBA only.

8. Replace the cover of the chassis.

9. Connect SAS cables between the HBA and the SAS enclosure that contains SATA or SAS

devices. The N2225 HBA has two SFF-8644, external x4 mini-SAS HD connectors. The N2226 HBA has

four SFF-8644, external x4 mini-SAS HD connectors. Use a cable with an external mini-SAS HD

connector (SFF-8644) on one end (to connect to the HBA) and the appropriate connector to attach to

the enclosure that contains SAS or SATA devices on the other end.

10. Replace the cover and any power cords, and power up the system. Replace the system cover,

reconnect any power cords, and reconnect any network cables. Turn on the power.

NOTE: The shape, size, and locations of the components on your HBAs and its bracket

might vary from this illustration. The HBA requires a x8 PCIe slot.

B

(GJHRI+RVW%RDUG

%LW6ORWV

92QO\

3&,([SUHVV

[6ORW

%LW6ORW

92QO\

%UDFNHW

6FUHZ

3UHVV

+HUH

3UHVV

+HUH

7R'ULYH

(QFORVXUHV

0LQL6$6+'

([WHUQDO

&RQQHFWRUV

TECHNICAL SUPPORT

For assistance installing, configuring, or

using the HBA, go to

http://www.ibm.com/supportportal/

Insert an N2226 HBA in a PCIe Slot

B

(GJHRI+RVW%RDUG

3&,([SUHVV[6ORW

%UDFNHW

6FUHZ

3UHVV

+HUH

3UHVV

+HUH

7R'ULYH

(QFORVXUHV

0LQL6$6+'

([WHUQDO

&RQQHFWRUV

Andere Handbücher für N2225

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IBM Computerhardware Handbücher

IBM

IBM MPC603EC Bedienungsanleitung

IBM

IBM p5 550 Installationsanleitung

IBM

IBM BladeCenter S SAS RAID Controller Module Bedienungsanleitung

IBM

IBM WebSphere DataPower XC10 Bedienungsanleitung

IBM

IBM Power System S914 Bedienungsanleitung

IBM

IBM S922 Bedienungsanleitung

IBM

IBM eserver 7210 Handbuch

IBM

IBM ATA 133 Bedienungsanleitung

IBM

IBM 6361 Bedienungsanleitung

IBM

IBM System x Education M5000 Series Bedienungsanleitung

IBM

IBM 4767 Bedienungsanleitung

IBM

IBM HOTR Bedienungsanleitung

IBM

IBM Netfinity FASt T500 Service-Handbuch

IBM

IBM SAN Volume Controller 2145-CF8 Handbuch

IBM

IBM Redbooks 2/4 Port Ethernet Expansion Card Bedienungsanleitung

IBM

IBM Power Systems 9223-22S Bedienungsanleitung

IBM

IBM QuickOn for Running Windows Bedienungsanleitung

IBM

IBM WebSphere DataPower XC10 Bedienungsanleitung

IBM

IBM Power Systems 8247-42L Bedienungsanleitung

IBM

IBM WD1003-WA2 Bedienungsanleitung

IBM

IBM Power 730 Express 8231-E2B Bedienungsanleitung

IBM

IBM Computer Gebrauchsanweisung

IBM

IBM M789 Series Bedienungsanleitung

IBM

IBM 2740-1 Benutzerhandbuch

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung