IBM QRadar XGS 5200 Leitfaden

Disk Drive Assembly Replacement Instructions

This document helps you to complete the following tasks:

vRemove a failed disk drive and replace it with a new disk drive

vVerify that the new disk drive is working correctly

Important: Before you proceed with these instructions, review the IBM Systems Safety Notices provided in

the IBM Media Terms and Conditions CD that is included with your appliance model.

Note: The illustrations in this document might differ slightly from your appliance model.

Supported appliances

The instructions in this document support IBM®QRadar®Network Security XGS 5200 (IBM Part Number:

00VM976).

Replacing a storage drive assembly

Before you begin

You must have a replacement storage drive assembly before you remove and replace the failed assembly.

About this task

Identifying the storage drive assembly

The front panel of the appliance contains the storage drive assembly, as highlighted in yellow in the

following figure:

Procedure

1. Shut down the appliance by using the local management interface (LMI) or the command-line

interface (CLI).

2. Unplug all of the power cords that are attached to the appliance.

3. Press the release button on the right side of the storage drive assembly to release the assembly lock.

4. Pull the drive handle lever to the left to pull the storage drive assembly from the drive bay, as shown

in the following figure:

Figure 1. Location of the storage drive assembly on the front of the appliance

5. Place the new storage drive assembly in the drive bay.

6. Push the storage drive assembly into the drive bay until the lever locks into place.

What to do next

Turn on the appliance, and then reimage it.

Important: You must reimage the appliance after you replace the storage drive. If you do not reimage

the appliance, the appliance can become inoperable.

For information about the IBM QRadar Network Security XGS 5200 appliance, see the IBM QRadar

Network Security Knowledge Center landing page at http://www.ibm.com/support/knowledgecenter/

SSHLHV. Information about other supported versions of the appliance is available from the Select

drop-down menu on the landing page.

Figure 2. Removing the storage drive assembly from the drive bay

2IBM Security: Storage Drive Assembly Replacement Instructions for IBM Part Number 00VM976

Inhaltsverzeichnis

Andere IBM Firewall Handbücher

IBM

IBM Proventia GX5000 Series Bedienungsanleitung

IBM

IBM Proventia Management SiteProtector SP2001 Bedienungsanleitung

IBM

IBM Proventia Bedienungsanleitung

IBM

IBM QRadar XGS 5200 Leitfaden

IBM

IBM Proventia Network GX4004 Bedienungsanleitung

IBM

IBM GX7000 Series Bedienungsanleitung

IBM

IBM SP3001 Bedienungsanleitung

IBM

IBM SP3001 Leitfaden

IBM

IBM DataPower XH40 Bedienungsanleitung

IBM

IBM GX7 Series Leitfaden

IBM

IBM Proventia Management SiteProtector SP2001 Bedienungsanleitung

IBM

IBM QRadar XGS 5200 Leitfaden

IBM

IBM Proventia Management SiteProtector SP1001 Bedienungsanleitung

IBM

IBM 1G Bedienungsanleitung

IBM

IBM Proventia Bedienungsanleitung

IBM

IBM SP3001 Leitfaden

Beliebte Firewall Handbücher anderer Marken

Cisco

Cisco S190 Bedienungsanleitung

Fortinet

Fortinet FortiGate Voice Series Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 2300 Bedienungsanleitung

SecureLogix

SecureLogix ETM System Bedienungsanleitung

NETGEAR

NETGEAR ProSafe FVX538 Bedienungsanleitung

Lanner

Lanner FW-8877 Bedienungsanleitung

Huawei

Huawei USG6000 Series Installations- und Betriebshandbuch

H3C

H3C SecPath F5000-AI-15 Bedienungsanleitung

Nexcom

Nexcom DNA 1150 Bedienungsanleitung

Fortinet

Fortinet FortiGate-60 series Bedienungsanleitung

Cisco

Cisco 3110 Handbuch

Draytek

Draytek Vigor2860 Series Bedienungsanleitung

Lanner electronics

Lanner electronics FW-7650 Series Bedienungsanleitung

Swisscom

Swisscom Internet Backup Bedienungsanleitung

SonicWALL

SonicWALL NSa 5700 Bedienungsanleitung

DPtech

DPtech FW1000 SERIES Bedienungsanleitung

FEITIAN

FEITIAN MultiPass FIDO Bedienungsanleitung

EBLOCKER

EBLOCKER PRO Bedienungsanleitung