IBM 450 xSeries Bedienungsanleitung

xSeries 450

User’s Guide

SC88-P919-20

ERserver



xSeries 450

User’s Guide

SC88-P919-20



Note: Before using this information and the product it supports, be sure to read the general information in Appendix A, “Warranty

information”, on page 33 and Appendix B, “Notices”, on page 45.

Third Edition (May 2003)

US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract

with IBM Corp.

Contents

Safety ............................v

Chapter 1. Introducing the IBM xSeries 450 ..............1

Related publications .......................1

Notices and statements used in this book ...............2

Features and specifications .....................3

What your IBM xSeries 450 offers ..................4

Reliability, availability, and serviceability features .............4

Active Memory .........................5

Memory scrubbing and Memory ProteXion ..............5

Memory mirroring .......................5

Server controls and indicators ....................6

Front view ..........................6

Rear view ..........................7

Server power features.......................9

Turning on the server ......................9

Turning off the server ......................9

Chapter 2. Configuring your server ................11

Using the Extensible Firmware Interface (EFI) Boot Manager ........11

Using the Configuration/Setup Utility program .............12

Starting the Configuration/Setup Utility program ............12

Configuration/Setup Utility menu choices ..............12

Passwords ........................14

Power-on password ....................14

Administrator password ...................14

Using the LSI Logic Configuration Utility program ............15

Setting up the Remote Supervisor Adapter...............16

Remote Supervisor Adapter features ................16

Setup requirements ......................16

Cabling and configuring the Remote Supervisor Adapter.........17

Cabling the Ethernet LAN port and serial port ...........17

Cabling the Ethernet LAN port ................18

Cabling the serial (COM) port ................19

Configuring the adapter....................19

Enabling remote access to the adapter .............19

Configuring the Ethernet settings for Web-based remote access....19

Configuring the serial port for text-based remote access.......21

Setting up point-to-point protocol ...............23

Installing Advanced System Management device drivers.......24

Configuring the remote control password ............24

Completing the configuration .................25

Using the ASM interconnect network ................25

Planning and cabling the interconnect network ...........25

Forwarding alerts ......................26

Connecting the ASM Interconnect module to the xSeries 450 ......27

ASM interconnect network configuration examples ..........28

Configuring the Gigabit Ethernet controller ...............30

Chapter 3. Getting help and technical assistance ...........31

Before you call .........................31

Using the documentation .....................31

Getting help and information from the World Wide Web ..........31

Software service and support ...................32

Hardware service and support ...................32

Appendix A. Warranty information .................33

Warranty period ........................33

Problem determination .....................33

Running diagnostics .....................33

Checking software .....................33

Warranty service and support ..................34

International Warranty Service ..................34

Purchasing additional services ..................35

IBM Statement of Limited Warranty Z125-4753-06 8/2000 .........36

Part 1 - General Terms .....................36

Part 2 - Country-unique Terms ..................38

Appendix B. Notices ......................45

Edition notice .........................45

Trademarks ..........................46

Important notes.........................46

Product recycling and disposal ...................47

Electronic emission notices ....................47

Federal Communications Commission (FCC) statement .........47

Industry Canada Class A emission compliance statement ........48

Australia and New Zealand Class A statement ............48

United Kingdom telecommunications safety requirement.........48

European Union EMC Directive conformance statement .........48

Taiwanese Class A warning statement ...............49

Chinese Class A warning statement ................49

Japanese Voluntary Control Council for Interference (VCCI) statement . . . 49

Power cords ..........................49

Index ............................53

iv xSeries 450: User’s Guide

Safety

Before installing this product, read the Safety Information.

Antes de instalar este produto, leia as Informações de Segurança.

Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.

Læs sikkerhedsforskrifterne, før du installerer dette produkt.

Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.

Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.

Avant d’installer ce produit, lisez les consignes de sécurité.

Vor der Installation dieses Produkts die Sicherheitshinweise lesen.

Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.

Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.

Antes de instalar este produto, leia as Informações sobre Segurança.

Antes de instalar este producto, lea la información de seguridad.

Läs säkerhetsinformationen innan du installerar den här produkten.

Statement 1:

DANGER

Electrical current from power, telephone, and communication cables is

hazardous.

To avoid a shock hazard:

vDo not connect or disconnect any cables or perform installation,

maintenance, or reconfiguration of this product during an electrical

storm.

vConnect all power cords to a properly wired and grounded electrical

outlet.

vConnect to properly wired outlets any equipment that will be attached to

this product.

vWhen possible, use one hand only to connect or disconnect signal

cables.

vNever turn on any equipment when there is evidence of fire, water, or

structural damage.

vDisconnect the attached power cords, telecommunications systems,

networks, and modems before you open the device covers, unless

instructed otherwise in the installation and configuration procedures.

vConnect and disconnect cables as described in the following table when

installing, moving, or opening covers on this product or attached

devices.

To Connect: To Disconnect:

1. Turn everything OFF.

2. First, attach all cables to devices.

3. Attach signal cables to connectors.

4. Attach power cords to outlet.

5. Turn device ON.

1. Turn everything OFF.

2. First, remove power cords from outlet.

3. Remove signal cables from connectors.

4. Remove all cables from devices.

vi xSeries 450: User’s Guide

Statement 2:

CAUTION:

When replacing the lithium battery, use only IBM Part Number 33F8354 or an

equivalent type battery recommended by the manufacturer. If your system has

a module containing a lithium battery, replace it only with the same module

type made by the same manufacturer. The battery contains lithium and can

explode if not properly used, handled, or disposed of.

Do not:

vThrow or immerse into water

vHeat to more than 100°C (212°F)

vRepair or disassemble

Dispose of the battery as required by local ordinances or regulations.

Statement 3:

CAUTION:

When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or

transmitters) are installed, note the following:

vDo not remove the covers. Removing the covers of the laser product could

result in exposure to hazardous laser radiation. There are no serviceable

parts inside the device.

vUse of controls or adjustments or performance of procedures other than

those specified herein might result in hazardous radiation exposure.

DANGER

Some laser products contain an embedded Class 3A or Class 3B laser

diode. Note the following.

Laser radiation when open. Do not stare into the beam, do not view directly

with optical instruments, and avoid direct exposure to the beam.

Safety vii

Statement 4:

≥18 kg (39.7 lb) ≥32 kg (70.5 lb) ≥55 kg (121.2 lb)

CAUTION:

Use safe practices when lifting.

Statement 5:

CAUTION:

The power control button on the device and the power switch on the power

supply do not turn off the electrical current supplied to the device. The device

also might have more than one power cord. To remove all electrical current

from the device, ensure that all power cords are disconnected from the power

source.

viii xSeries 450: User’s Guide

Andere Handbücher für 450 xSeries

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IBM Server Handbücher

IBM

IBM RS/6000 7043 43P Series Bedienungsanleitung

IBM

IBM Netfinity 7600 Bedienungsanleitung

IBM

IBM BladeCenter JS20 Betriebsanleitung

IBM

IBM 7013 J Series Handbuch

IBM

IBM P 615 series Bedienungsanleitung

IBM

IBM 86596ry - Servers Netfinity Pentium 3 Bedienungsanleitung

IBM

IBM Netfinity 7100 Montageanleitung

IBM

IBM 87302RU Technisches Handbuch

IBM

IBM F10 Bedienungsanleitung

IBM

IBM x3800 - System - 8865 Bedienungsanleitung

IBM

IBM HS21 XM BLADECENTER - L5408 FOR SPEC CPU2006 Handbuch

IBM

IBM System x3500 M2 Type 7839 Bedienungsanleitung

IBM

IBM System x3690 X5 Bedienungsanleitung

IBM

IBM RS/6000 7014-S00 Montage- und Wartungsanleitung

IBM

IBM Power System 8335-GCA Bedienungsanleitung

IBM

IBM Eserver xSeries 360 Type 8686 Bedienungsanleitung

IBM

IBM 8853L6U Bedienungsanleitung

IBM

IBM x3200 - System M3 - 7328 Bedienungsanleitung

IBM

IBM x3500 M3 7380 Bedienungsanleitung

IBM

IBM Multiprise 3000 S/390 Bedienungsanleitung

IBM

IBM System x3250 Bedienungsanleitung

IBM

IBM xSeries 346 Bedienungsanleitung

IBM

IBM BladeCenter HS22 Handbuch

IBM

IBM BladeCenter HS22 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung