IBM 8486 - eServer xSeries 100 Bedienungsanleitung

xSeries 100

Type 8486

User’s Guide

ERserver



xSeries 100

Type 8486

User’s Guide

ER s e r v e r



Note:

Before using this information and the product it supports, read the general information in “Notices,” on

page 47, and the Warranty and Support Information document on the IBM xSeries Documentation CD.

First Edition (October 2005)

US Government Users Restricted Rights –Use, duplication or disclosure restricted by GSA ADP Schedule Contract

with IBM Corp.

Contents

Safety ............................v

Chapter 1. The xSeries 100 Type 8486 server .............1

Related documentation ......................2

Notices and statements in this document ................3

Features and specifications .....................4

What your server offers ......................5

Reliability, availability, and serviceability ................6

IBM Director ..........................7

Update Xpress program ......................7

Server controls, LEDs, and power ..................8

Front view ..........................8

Rear view ..........................9

Server power features ......................10

Turning on the server .....................10

Turning off the server .....................11

Chapter 2. Installing options ...................13

Server components .......................13

System-board internal connectors .................14

System-board switches and jumpers ................14

System-board external connectors .................14

System-board LEDs ......................15

System-board option connectors .................16

Installation guidelines ......................16

System reliability guidelines ...................17

Handling static-sensitive devices .................17

Removing the side cover .....................18

Removing the bezel .......................19

Installing amemory module ....................20

Installing adrive ........................23

Installing aremovable-media drive in bay 2or 3............24

Installing aSATA hard disk drive in bay 4or 5............27

Power and signal cables for internal drives .............29

Installing an adapter .......................30

Cabling an optional SCSI adapter ..................32

Installing asecurity rope clip ....................33

Completing the installation.....................34

Installing the bezel ......................34

Installing the side cover.....................35

Connecting the cables .....................36

Updating the server configuration .................36

Chapter 3. Configuring the server .................37

Using the Configuration/Setup Utility program .............37

Starting the Configuration/Setup Utility program ............38

Configuration/Setup Utility menu choices ..............38

Passwords .........................41

Erasing alost or forgotten password (clearing CMOS) .........42

Using the ServerGuide Setup and Installation CD ............43

ServerGuide features .....................43

Setup and configuration overview .................44

Typical operating-system installation ................44

©Copyright IBM Corp. 2005 iii

Installing your operating system without ServerGuide ..........44

Using the Boot Menu program ...................45

Enabling the Broadcom NetXtreme Gigabit Ethernet Utility program .....45

Configuring the Broadcom NetXtreme Gigabit Ethernet controller ......45

Updating IBM Director ......................46

Appendix. Notices .......................47

Edition notice .........................47

Trademarks ..........................48

Important notes.........................48

Product recycling and disposal ...................49

Index ............................51

iv xSeries 100 Type 8486: User’s Guide

Safety

Before installing this product, read the Safety Information.

Antes de instalar este produto, leia as Informações de Segurança.

Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.

Læs sikkerhedsforskrifterne, før du installerer dette produkt.

Lees voordat udit product installeert eerst de veiligheidsvoorschriften.

Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.

Avant d’installer ce produit, lisez les consignes de sécurité.

Vor der Installation dieses Produkts die Sicherheitshinweise lesen.

Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.

Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.

Antes de instalar este produto, leia as Informações sobre Segurança.

©Copyright IBM Corp. 2005 v

Antes de instalar este producto, lea la información de seguridad.

Läs säkerhetsinformationen innan du installerar den här produkten.

Statement 1:

DANGER

Electrical current from power, telephone, and communication cables is

hazardous.

To avoid ashock hazard:

vDo not connect or disconnect any cables or perform installation,

maintenance, or reconfiguration of this product during an electrical

storm.

vConnect all power cords to aproperly wired and grounded electrical

outlet.

vConnect to properly wired outlets any equipment that will be attached to

this product.

vWhen possible, use one hand only to connect or disconnect signal

cables.

vNever turn on any equipment when there is evidence of fire, water, or

structural damage.

vDisconnect the attached power cords, telecommunications systems,

networks, and modems before you open the device covers, unless

instructed otherwise in the installation and configuration procedures.

vConnect and disconnect cables as described in the following table when

installing, moving, or opening covers on this product or attached

devices.

To Connect: To Disconnect:

1. Turn everything OFF.

2. First, attach all cables to devices.

3. Attach signal cables to connectors.

4. Attach power cords to outlet.

5. Turn device ON.

1. Turn everything OFF.

2. First, remove power cords from outlet.

3. Remove signal cables from connectors.

4. Remove all cables from devices.

vi xSeries 100 Type 8486: User’s Guide

Statement 2:

CAUTION:

When replacing the lithium battery, use only IBM Part Number 33F8354 or an

equivalent type battery recommended by the manufacturer. If your system has

amodule containing alithium battery, replace it only with the same module

type made by the same manufacturer. The battery contains lithium and can

explode if not properly used, handled, or disposed of.

Do not:

vThrow or immerse into water

vHeat to more than 100°C (212°F)

vRepair or disassemble

Dispose of the battery as required by local ordinances or regulations.

Statement 3:

CAUTION:

When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or

transmitters) are installed, note the following:

vDo not remove the covers. Removing the covers of the laser product could

result in exposure to hazardous laser radiation. There are no serviceable

parts inside the device.

vUse of controls or adjustments or performance of procedures other than

those specified herein might result in hazardous radiation exposure.

DANGER

Some laser products contain an embedded Class 3A or Class 3B laser

diode. Note the following.

Laser radiation when open. Do not stare into the beam, do not view directly

with optical instruments, and avoid direct exposure to the beam.

Safety vii

Statement 4:

≥18 kg (39.7 lb) ≥32 kg (70.5 lb) ≥55 kg (121.2 lb)

CAUTION:

Use safe practices when lifting.

Statement 5:

CAUTION:

The power control button on the device and the power switch on the power

supply do not turn off the electrical current supplied to the device. The device

also might have more than one power cord. To remove all electrical current

from the device, ensure that all power cords are disconnected from the power

source.

viii xSeries 100 Type 8486: User’s Guide

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IBM Server Handbücher

IBM

IBM eServer xSeries 300 Produktinformationsblatt

IBM

IBM System p5 505 Bedienungsanleitung

IBM

IBM eServer BladeCenter HS20Type 8832 Bedienungsanleitung

IBM

IBM BladeCenter HS22 Type 7870 Bedienungsanleitung

IBM

IBM System z10 EC Bedienungsanleitung

IBM

IBM x3500 M3 7380 Bedienungsanleitung

IBM

IBM x3450 - System - 7948 Bedienungsanleitung

IBM

IBM Power 595 Installationsanleitung

IBM

IBM NetVista N2200w Bedienungsanleitung

IBM

IBM Power System System E950 Bedienungsanleitung

IBM

IBM 866631Y - Netfinity 7100 - 8666 Betriebsanleitung

IBM

IBM eServer 380 xSeries Bedienungsanleitung

IBM

IBM 7013 J Series Handbuch

IBM

IBM Netfinity 6000R Produktinformationsblatt

IBM

IBM System i Bedienungsanleitung

IBM

IBM 783722U Bedienungsanleitung

IBM

IBM BladeCenter JS20 Betriebsanleitung

IBM

IBM 7940 Bedienungsanleitung

IBM

IBM Power System IC922 Bedienungsanleitung

IBM

IBM 8248-L4T Bedienungsanleitung

IBM

IBM Power Systems 7063-CR1 Bedienungsanleitung

IBM

IBM Power Systems Series Bedienungsanleitung

IBM

IBM NetVista N70 Service-Handbuch

IBM

IBM 8676G1X Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung