IBM N3240 Handbuch

IBM System Storage

N3240

Installation and Setup Instructions

Covering the N3240 model

GA32-2203-02



Notices

Mail comments to:

IBM Corporation

Attention Department GZW

9000 South Rita Road

Tucson, AZ 85744-0001

www.ibm.com/storage/support/nseries

References in this publication to IBM products or services do not imply that IBM intends to make them available in

every country or region.

IBM, the IBM logo, and ibm.com®are trademarks or registered trademarks of International Business Machines

Corporation in the United States, other countries, or both. A complete and current list of other IBM trademarks is

available on the web at .www.ibm.com/legal/copytrade.shtml

Data ONTAP, NetApp, and Network Appliance are trademarks and/or registered trademarks of NetApp, Inc in the

United States and other countries.

Other company, product, and service names may be trademarks or service marks of others.

US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract

with IBM Corp.

Contents

Before you begin ................................v

Overview of the N3240 .............................vii

Installation and setup instructions ........................1

Unpacking the N3240 series filer.............................1

Installing the rails in an IBM 19-inch rack .........................2

Installing the N3240 in the rack .............................4

Setting storage expansion unit shelf IDs ..........................5

Setting SAS expansion unit shelf IDs ..........................5

Setting EXN4000 or EXN1000 storage expansion unit shelf IDs .................6

Attaching the cable management arms...........................7

Connecting the N3240 filer to a network ..........................7

Connecting the system to expansion units .........................10

Installing the power cables ..............................10

Setting up and booting the system in Data ONTAP 7-Mode ...................11

Setting up and booting the system in Clustered Data ONTAP ..................12

Appendix. Troubleshooting and additional resources................13

Troubleshooting tips ................................13

Additional resources ................................13

Before you begin

Read this information before beginning your installation.

Before you begin your installation, print and complete a Configuration worksheet for your storage system

to gather the information that the software setup process requires. The configuration worksheet is

provided in the Data ONTAP Software Setup Guide for your version of Data ONTAP, which is available on

the IBM®N series support website:

www.ibm.com/storage/support/nseries/

If you are configuring a storage system as part of a high-availability configuration, some information

types must be unique for each storage system node in the configuration, and some information types

must be identical on both storage system nodes. If you have a high-availability configuration, IBM

recommends that you print and complete two copies of the configuration worksheet, one for each system

node.

About this document

This document provides installation and setup instructions for the IBM System Storage®N3240 filer

storage system.

For additional information about your system and related topics, refer to the following resources.

vIBM System Storage N3150, N3220, and N3240 Hardware and Service Guide

vIBM System Storage N series Introduction and Planning Guide

vIBM Environmental Notices and User Guide

vIBM System Storage N series Safety Notices

vIBM System Storage N series support website at www.ibm.com/storage/support/nseries/

Additional information about the N series storage expansion units you connect to your system can be

found in the Hardware and Service Guides and the Installation and Setup Instructions for your storage

expansion units.

Read the safety notices

Before continuing, make sure that you have reviewed the safety notices, IBM System Storage N series Safety

Notices, shipped with this product. Do not plug any cables into the system, adapters, or any electrical

outlets until you have reviewed the safety information and followed the procedures in this document.

Need help?

If you encounter any difficulties while setting up your system, contact IBM service and support for

assistance. Information can also be found on the IBM N series support website:

www.ibm.com/storage/support/nseries/

About the IBM N series support website

The IBM System Storage N series support website requires users to register in order to obtain access to N

series support content on the web. To understand how the N series support web content is organized and

navigated, and to access the N series support website, go to the following publicly accessible web page:

www.ibm.com/storage/support/nseries/

This web page also provides links to AutoSupport information as well as other important N series

product resources.

Items supplied by you for the installation

You need to supply the following items to complete the installation:

vEthernet LAN cables

vFibre Channel (FC) cables

vConsole (for example, a PC or notebook)

v#2 Phillips screwdriver and slotted screwdriver

Installing in a non-IBM rack

The rack installation instructions provided in this document apply specifically to the installation of the N

series product in an IBM 19-inch rack. IBM service personnel cannot install the N series product in a

non-IBM rack.

If the N series product is being installed in a non-IBM rack, the rails shipped with the N series product

may or may not work with the non-IBM rack. Physical installation of the N series product in a non-IBM

rack is the customer's responsibility.

Overview of the N3240

Refer to the following figures to familiarize yourself with the N3240.

1 Shelf power LED 3 Shelf activity LED

2 Shelf fault LED 4 Two-digit shelf ID digital display

1 Operation panel 3 Tab for changing the shelf ID

2 Left mounting tab 4 Right mounting tab

Note: Disk drive bays are numbered horizontally starting from 0 at the upper left position to 23 at the

lower right position.

n324001

Figure 1. Front view with bezel

Drive

Bays

0-3

4-7

8-11

12-15

16-19

20-23

1 2 34

n324002

Figure 2. Front view without bezel

1 AC fault LED 10 Serial Console port

2 Fan fault LED 11 Remote Management port (wrench icon)

3 Power LED 12 ACP port (locked wrench icon)

4 DC fault LED 13 Gigabit Ethernet ports (4)

5 Power supplies (4, each with two integrated

fans)

14 Controller modules (1 or 2 depending on the

model)

6 SAS port (2) 15 Controller module blanks (2 or 3 depending

on the model)

7 Module fault LED 16 Mezzanine card ports 10 Gb option

8 NVMEM LED 17 Mezzanine card ports 8 Gb Fibre Channel

option

9 Mezzanine card ports (8 Gb FC or 10 Gb

Ethernet)

18 Slot map label

e0b e0d

e0a e0c

SLOT

MAP PSU 1

PSU 3

PSU 2

PSU 4

SBB A

SBB B

Slot A

Slot B

e0b e0d

e0a e0c

LNK LNK

0b 0a

e0b e0d

e0a e0c

LNK !+

LNKLNK

LNK

0b 0a

n324003

56789

12 13

14 15

LNKLNK

e1a e1b

ACTACT

Figure 3. Rear view

viii

Installation and setup instructions

Use these instructions to install and set up your N3240 series filer.

Unpacking the N3240 series filer

Use these instructions to unpack the N3240 filer.

Important: If your system was shipped already assembled and cabled in a rack, go directly to “Setting

up and booting the system in Data ONTAP 7-Mode” on page 11 or “Setting up and booting the system in

Clustered Data ONTAP” on page 12 depending on your configuration.

Each N3240 system enclosure ships with an accessories kit and set-up kit containing documentation and

hardware parts for installing your system. The quantity of hardware parts is determined by your system

configuration and requirements.

Each shipment container includes the following contents:

vN3240 series system enclosure

vN3240 series system bezel

vN3240 Installation and Setup Instructions

vGeneral information kit, containing warranty, safety, and environmental information

vSoftware license

svc00168

32-55 kg (70.5-121.2 lbs)

CAUTION:

The weight of this part or unit is more than 45.4 kg (100 lb). It takes specially

trained persons, a lifting device, or both to safely lift this part or unit.

1. Remove the foam hardware protectors and the plastic surrounding the system.

2. Place the storage system on a table.

Contents for each N3240 model

The N3240 is a single-enclosure high availability (HA) capable system. Each N3240 model also ships with

at least one envelope with the software End User License Agreement (EULA) and license keys. The

following list describes the contents of the shipping packages included with the N3240 model:

v2 console adapters, RJ-45 to DB-9 (one per controller module)

v4 cable management arms (two per controller node)

v1 ESD wrist strap

v4 power cables

v2 serial null modem cables (one per controller)

v3U IBM rail kit

v1 set of IBM publications

Installing the rails in an IBM 19-inch rack

Use these instructions to install the rails on which you will mount the N3240.

Note: Read this document in its entirety before proceeding.

1. Loosen (but do not remove) the four rail adjustment screws on each rail.

2. Use Figure 5 on page 3 for reference. At the front of the rack, position the right-hand rail into the rack

at the appropriate EIA location (make sure that the two locating pins seat properly). The bottom of

the rail should line up with the bottom EIA boundary.

Right rail

Left rail

Front of rack

Rear of rack

Rail adjustment

screws

Locating pins

n620007

Figure 4. Installing the rails into the rack

Inhaltsverzeichnis

Andere IBM Lagerung Handbücher

IBM

IBM System x3755Types 7163 Bedienungsanleitung

IBM

IBM 5280 Bedienungsanleitung

IBM

IBM FlashSystem 710 Bedienungsanleitung

IBM

IBM FlashSystem 720 Bedienungsanleitung

IBM

IBM EXN1000 Bedienungsanleitung

IBM

IBM RDX Bedienungsanleitung

IBM

IBM Storwize V7000 Betriebsanleitung

IBM

IBM SAN32B-E4 Handbuch

IBM

IBM Storwize V7000 Bedienungsanleitung

IBM

IBM FlashSystem 810 Bedienungsanleitung

IBM

IBM 2310 Bedienungsanleitung

IBM

IBM TotalStorage FAStT EXP700 Bedienungsanleitung

IBM

IBM System Storage DS5020 Betriebsanleitung

IBM

IBM DR550 V3.0 Bedienungsanleitung

IBM

IBM DS4700 EXPRESS Bedienungsanleitung

IBM

IBM 3340 Bedienungsanleitung

IBM

IBM SYSTEM STORAGE EXP3000 - INTEROPERABILITY MATRIX... Bedienungsanleitung

IBM

IBM Travelstar 3LP Bedienungsanleitung

IBM

IBM TotalStorage Ultrium 3580 L23 Handbuch

IBM

IBM 7131-105 Bedienungsanleitung

IBM

IBM System Storage DS4000 EXP420 Betriebsanleitung

IBM

IBM TS4500 Technisches Handbuch

IBM

IBM TotalStorage 3580 L33 Bedienungsanleitung

IBM

IBM DCAS-32160 - Ultrastar 2.1 GB Hard Drive Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung