IBM Flex System EN2092 Bedienungsanleitung

Configuring the IBM Flex System EN2092 1Gb Ethernet Sc l ble Switch

Prerequisites:

One IBM Flex System Enterprise Chassis, one IBM Flex System EN2092 1Gb Ethernet S alable

Swit h installed in I/O module bay 1 or 2.

An Ethernet network is already onfigured.

Steps:

Note: This pro ess illustrates how to enable the swit h ports through the Chassis Management Module

(CMM) ommand-line interfa e. For information about using the CMM interfa e, you an use the

“Configuring IBM Flex System Enterprise Chassis omponents” qui k start guide. You an find that qui k

start guide at this lo ation:

In the information enter (Internet):

http://pi .dhe.ibm. om/info enter/flexsys/information/topi / om.ibm.a . ommontasks.do / ommonta

sks_ hassis_ onfig.html

The IBM Flex System produ t do umentation is also available on the IBM Flex System Manager management node. To a ess

the installed do umentation, li k Information Center from the IBM Flex System Manager Home page and then navigate to:

IBM Flex System information -> Qui k start guides -> Installing and onfiguring the IBM Flex System Enterprise Chassis

1. Log on to the Chassis Management Module (CMM) CLI with an SSH appli ation. The default IP

address is 192.168.70.100 and the default login/password is USERID/PASSW0RD. If ne essary, obtain

the IP address and login of the CMM from your system administrator.

2. Set the environment to the bay where you installed the swit h. The following example is for bay 2:

env -T system:swit h[2]

3. Run the following ommand to enable external data ports:

if onfig -ep enabled

External ports 1 – 10 are now enabled for data throughput.

Page 1 of 2

Activating additional keys:

If you have pur hased additional keys, they need to be installed on the swit h. Complete the following

steps to install additional keys using the ISCLI interfa e.

1. To retrieve the key, navigate a browser to https://www.ibm. om/systems/x/fod/index.wss and sign in

with your ID and password

2. Cli k Request activation key.

3. Enter the authorization ode. The authorization ode was supplied to you by email or on paper as

part of the ordering pro ess.

4. Cli k Continue and follow the instru tions and download the key file.

5. Log on to the EN2092 swit h with an SSH appli ation. The default IP addresses for the swit h

through the CMM are as follows: 192.168.70.120 (bay 1), 192.168.70.121 (bay 2), 192.168.70.122

(bay 3), and 192.168.70.123 (bay 4). If ne essary, obtain the IP address and login of the swit h from

your system administrator.

6. Enter ena.

7. Enter software-key.

8. Enter enakey address <hostname or IP address> keyfile <file name>

protocol tftp mgt-port

Note: you must reset the swit h to apply the key.

9. Reset the swit h. Enter reload..

Repeat the step for additional keys if needed. The sequen e of steps is shown here:

Router#ena

Router(config)#software-key

Router(Software-Key)#enakey address 9.44.143.206 keyfile

ibm_fod_0007_ 010CM28N001_anyos_noarch.key protocol tftp mgt-port

Starting download key file...

Key file download complete (494 bytes)

Software feature Upgrade1 will be Active upon next reboot.

Aug 5 11:47:39 1080:0:0:0:0:0:0:82 NOTICE mgmt: Software feature Upgrade1

will be Active upon next reboot.

A Reboot is required for the new settings to take effect.

Router(Software-Key)#reload

...

Resetting at 11:47:59 Tue Aug 5, 2014...

Page 2 of 2

Andere Handbücher für Flex System EN2092

Inhaltsverzeichnis

Andere IBM Schalten Handbücher

IBM

IBM G8052 Bedienungsanleitung

IBM

IBM F12 Bedienungsanleitung

IBM

IBM J48E Bedienungsanleitung

IBM

IBM RackSwitch G8332 Bedienungsanleitung

IBM

IBM G8124E Bedienungsanleitung

IBM

IBM FC5022 Bedienungsanleitung

IBM

IBM Nways 8260 Bedienungsanleitung

IBM

IBM BROCADE 4 GB FC HBAS Bedienungsanleitung

IBM

IBM Brocade FCoE Bedienungsanleitung

IBM

IBM TotalStorage 3534-F08 Bedienungsanleitung

IBM

IBM BNT Bedienungsanleitung

IBM

IBM RackSwitch G8264T Bedienungsanleitung

IBM

IBM F16 Bedienungsanleitung

IBM

IBM 360 Bedienungsanleitung

IBM

IBM Flex System EN2092 Bedienungsanleitung

IBM

IBM Storage Networking SAN128B-6 Handbuch

IBM

IBM 09N4290 Bedienungsanleitung

IBM

IBM 8271 Nways Ethernet LAN Switch Bedienungsanleitung

IBM

IBM BNT RackSwitch G8124R Bedienungsanleitung

IBM

IBM TotalStorage 2109 M12 Bedienungsanleitung

IBM

IBM RedBooks SAN24B-5 Handbuch

IBM

IBM 8265 Nways ATM Switch Bedienungsanleitung

IBM

IBM 2498B24 - System Storage SAN24B-4 Switch Handbuch

IBM

IBM Nways 8271 F12 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung