ICM Controls SC2201 Allgemeine Anweisungen
Manual Changeover
Non-Programmable
Hardwired
SC 2201
Non-Programmable Electronic Thermostat
Installation, Operation & Application Guide
For more information on our complete range of American-made
products – plus wiring diagrams, troubleshooting tips and more,
visit us at www.icmcontrols.com
• For use with Heat Pumps
• Up to 2-Stage Heat, 2-Stage Cool
• 30-Minute Power Loss Memory Retention
• For use with 24 VAC Systems
Table of Contents
CAUTION!
:
Thisthermostatshouldbeinstalledbytrainedtechniciansonly.Adheretoalllocaland
nationalcodes.Disconnectallpowertothesystembeforeinstalling,removing,orcleaning.
PartsDiagram........................................................ 1
Specications........................................................ 2
Features/Benets.................................................. 2
PackageContents/ToolsRequired........................ 2
ImportantSafetyInformation................................. 3
GeneralDescription............................................... 2
ToRemoveExistingThermostat............................ 4
ReplacingWiringLabels........................................ 4
ToInstallThermostat............................................. 5
TestingtheThermostat.......................................... 6
LEDIndicators....................................................... 8
Operation...............................................................9
WiringDiagrams.................................................. 11
CarrierSplitStreamCondensers........................................... 11
Coleman3000Series............................................................12
ComfortmakerCYCSeries....................................................13
Heil-Quaker867.814SeriesandPH50Series...................... 14
PayneReliantandEnduraModel..........................................15
Rheem/Ruud: -PGB,-PFA,-PCB,
-PLA,and-PKASeries.................................16
Goodman,Janitrol,Trane/AmericanStandard......................17
York-E1CS,-E1FB,E1FH.....................................................18
LennoxCB19 ......................................................................19
LennoxHP19andHP20........................................................20
LennoxHP21withCB21PCB...............................................21
LennoxHP22withCB19PCB...............................................22
FHP1Stage..........................................................................23
FHP2Stage..........................................................................24
Troubleshooting................................................... 25
1
Parts Diagram
2
Specifications
Input:
• Voltage:24VAC(18-30VAC)
Output:
• Maximum:1ampmaximumloadperterminal
(4amptotalmaximumloadforallterminals)
Temperature Ranges:
• Temperature control range: 45°Fto90°F(7°Cto32°C)Accuracy:±1°F(±0.5°C)
• Differential range: 1°Fto3°F(0.5°Cto1.5°C)
System configurations:Multi-stageheatpump(two-stageheat,two-stagecool)
Terminations:R,C,E,Y1,Y2,O,B,G,L,W2
Second stage activation in heat mode:2°belowrststage(notadjustable)
Second stage activation in cool mode:2°aboverststage(notadjustable)
SET
ROOM
DIFF
Temperature
differentialsetting
Roomtemperature
Roomtemperature
setpoint
Package Contents/Tools Required
Package includes: SimpleComfort®2201non-programmablethermostatonbase,thermostatcover,wiringlabels,
screwsandwallanchors,Installation,OperationandApplicationGuide.
Tools required for installation:Drillwith3/16”bit,hammer,screwdriver.
Features/Benefits
• Multi-stageheating/coolingcontrol
• Multi-coloredLEDindicatorsforsystemstatus
• Zonesystemcompatibleasamasterthermostat
• Fahrenheitdisplayandoperationcanbechanged
toCelsius
• Adjustabletemperaturedifferential: 1°Fto3°F
(0.5°Cto1.5°C)
• Automaticheatingsystemshutdowniftemperature
exceeds90°F(32°C)
• 30-minutepowerinterruptionmemoryretention
• Resetbuttonfordifferentialtemperatureadjustment
• Independentsetpointsforheatandcool
3
Important Safety Information
General Description
TheSimpleComfort®2201isintendedtooperateandiscompatiblewith24VACresidentialheatpumpswithupto
2-stageheat/2-stagecool.Itwilloperatewithmulti-stageheatpumpsystemsthataremanualchangeoverandhave
auxiliaryoremergencyheating.Therearenooptionalitemsrequiredforstandardinstallations.Thisthermostatisalso
compatibleasamasterthermostatinzonedsystemapplications.
TheSimpleComfort®2201willautomaticallycontroltheheatand/orairconditioningsystem.Whenusedproperly,this
thermostatcanreduceheatingandcoolingcoststhroughouttheyear.
• Alwaysturnoffpoweratthemainpowersourcebyunscrewingfuseorswitchingcircuitbreakertotheoffposition
beforeinstalling,removing,cleaning,orservicingthisthermostat
• Readalloftheinformationinthismanualbeforeinstallingthisthermostat
• Thisthermostatshouldbeinstalledonlybyaprofessionalcontractor
• Thisisa24VAClow-voltagethermostat;donotinstallonvoltageshigherthan30VAC
• Allwiringmustconformtolocalandnationalbuildingandelectricalcodesandordinances
• Donotswitchsystemtocooliftheoutdoortemperatureisbelow50°F(10°C);thiscandamagetheairconditioning
systemandmaycausepersonalinjury
• Thethermostatwillnotcontrolyourheating/airconditioningsystemwithoutpower;itrequiresacontinuous24VAC
circuitforpropersystemcontrol
• Usethisthermostatonlyasdescribedinthismanual
• Whilecleaning,donotgetsoapdirectlyonthermostatswitchesorLCDreadout;onlyusea
dampclothwithamildsoaptowipeoutsideofthermostatcover
4
ELECTRICAL SHOCK HAZARD – Turn off power at the main service panel by removing the fuse
or switching the appropriate circuit breaker to the Off position before removing the existing
thermostat.
1. Turnoffpowertotheheatingandcoolingsystembyremovingthefuseorswitchingofftheappropriatecircuit
breaker.
2. Removecoverofoldthermostat.Thisshouldexposethewires.
3. Label the existing wires with the enclosed wire labels before removing wires.Seetablebelowforoldand
newlabelidentication.
4. Afterlabelingwires,removewiresfromwireterminals.
5. Removeexistingthermostatbasefromwall.
6. Refertothefollowingsectionforinstructionsonhowtoinstallthisthermostat.
Replacetheoldlabelswiththeenclosednewlabels:
Old New Type
R,V-VRorVR-R R 24VAC,return
Y,Y1orM Y1 Stage1cooling/heatingcircuit
OorR O Reversingvalve(coolingmode)
B B Reversingvalve(heatmode)
GorF G Fancontactorcircuit
Y2 Y2 2ndstagecoolingcircuit
W1,W2orW-U W2 2ndstageheatingcircuit
LorX L SystemmonitorLED
E E Emergencyheatingcircuit
C,XorB C 24VAC,transformercommonside
Replacing Wiring Labels
To Remove Existing Thermostat
5
ELECTRICAL SHOCK HAZARD – Turn off power at the main service panel by removing the fuse
or switching the appropriate circuit breaker to the Off position before removing the existing
thermostat.
IMPORTANT: Thermostatinstallationmustconformtolocalandnationalbuildingandelectricalcodesand
ordinances.
IMPORTANT: Thisthermostatiscompatiblewith100%lockoutsystems.Toresetthesystem,turnthermostat
toOffpositionforatleast60seconds.
Note:
Mountthethermostataboutvefeetabovetheoor.Donotmountthethermostatonanoutsidewall,
indirectsunlight,behindadoor,orinanareaaffectedbyaventorduct.
1. Turnoffpowertotheheatingandcoolingsystembyremovingthefuseorswitchingofftheappropriatecircuit
breaker.
2. PutMode switchinOffposition.
3. PutFan switchinAutoposition.
4. Toremovecover,insertandtwistacoinorscrewdriver
intheslotsonthesidesofthethermostat.
5. Putthermostatbaseagainstthewallwhereyouplantomountit(Besurewireswillfeedthroughthewireopening
inthebaseofthethermostat).
6. Marktheplacementofthemountingholes.
7. Setthermostatbaseandcoverawayfromworkingarea.
8. Usinga3/16”drillbit,drillholesintheplacesyouhavemarkedformounting.
9. Useahammertotapsuppliedanchorsinmountingholes.
10. Alignthermostatbasewithmountingholesandfeedthecontrolwiresthroughwireopening.
11. Usesuppliedscrewstomountthermostatbasetowall.
Cool Off Heat Emer Auto On
Mode Fan
To Install Thermostat
6
12. Insertstripped,labeledwiresinmatchingwireterminals.SeeWiringDiagramssectionofthismanual(Pages11-
24).
CAUTION!
:
Besureexposedportionofwiresdoesnottouchotherwires.
13. Tightenscrewsonterminalblock.Gentlytugwiretobesureofproperconnection.Doublecheckthateachwireis
connectedtotheproperterminal.
14. Sealholeforwireswithnon-ammableputtyorinsulation.
15. Replacecoveronthermostatbysnappingitinplace.
16. Turnonpowertothesystematthemainservicepanel.
17. Testthermostatoperationasdescribedinthefollowingsection.
CAUTION!
:
Donotswitchsystemtocooliftheoutdoortemperatureisbelow50°F(10°C).Thiscandamage
theairconditioningsystemandmaycausepersonalinjury.
1. PuttheMode switchtoCoolposition.
2. Pressthe buttonuntilthetemperaturesettingisatleast3degreesbelowtheroom
temperature.Theairconditioningsystemandfanshouldturnonwithinafewseconds.
3. PuttheMode switchintheOffposition.Theairconditioningsystemshouldturnoff.
Thefanmayhaveadelay.
Note:
PressingtheResetbuttonwillbypassthe5-minuteanti-shortcycle
compressorprotection.
Cool Off Heat Emer
Cool Off Heat Emer
Mode
Mode
Testing the Thermostat
7
Note:
WhileinCoolorHeatmode,oncethethermostatturnsthesystemoff,abuilt-indelaykeepsthe
compressorfromturningonforabout5minutes.Thisprotectsthecompressor.
4. PuttheMode switchtotheHeatposition.
5. Pressthe buttonuntilthetemperaturesettingisatleast3degreesaboveroom
temperature.Theheatingsystemshouldturnon.
Note:
Thecompressormaynotturnonagainfor5minutes.
6. PuttheMode switchtotheOffposition.Theheatingsystemshouldturnoff.Onceagain
thefanmayhaveadelay.
7. PuttheFan switchtotheOnposition.Theblowerfanshouldturnon.
8. PuttheFan switchtotheAutoposition.Theblowerfanshouldturnoff.
Ifallfunctionsoperateproperly,thethermostatisinstalledcorrectly.
If the thermostat does not operate properly:
• Checkallwiringconnections
• SeeTroubleshooting(Page25)
Cool Off Heat Emer
Auto On
Auto On
Cool Off Heat Emer
Mode
Mode
Fan
Fan
8
TherearethreeLEDindicatorslocatedonthefrontofthethermostat.Theyaredesignedtoinformyouofthefollowing:
AUX (GREEN): Thisturnsonwhentheauxiliary(back-up)heatingisinoperation.Thisisthesecond(non-economy)
stageofheat.Itturnson2degreesbelowrststageandisnotadjustable.
CHECK (RED): Whenthisturnson,amalfunctionhasoccurredsomewhereintheheatpumpsystem.Pleasecontact
aqualiedservicetechnicianassoonaspossibletocheckyoursystem.
EMER (RED):This light turns on whenever the emergency heat is manually selected (system switch is in
the EMER position). While in the emergency heat mode, the heat pump compressor is off,
and the emergency heat (same as the auxiliary heat) maintains the setpoint temperature.
Cool Off Heat Emer OnAuto
Aux Check Emer
EMER (RED)
CHECK (RED)
AUX (GREEN)
LED Indicators
Andere Handbücher für SC2201
2
Inhaltsverzeichnis
Andere ICM Controls Thermostat Handbücher
ICM Controls
ICM Controls SC 4211 Allgemeine Anweisungen
ICM Controls
ICM Controls SC4011 Allgemeine Anweisungen
ICM Controls
ICM Controls SC900V Allgemeine Anweisungen
ICM Controls
ICM Controls SimpleComfort SC2211L Bedienungsanleitung
ICM Controls
ICM Controls SC1600L Allgemeine Anweisungen
ICM Controls
ICM Controls SC 4811 Allgemeine Anweisungen
ICM Controls
ICM Controls SC710LV Allgemeine Anweisungen
ICM Controls
ICM Controls SC 3006 Allgemeine Anweisungen
ICM Controls
ICM Controls SC 2811 Allgemeine Anweisungen
ICM Controls
ICM Controls I3 1010HR Allgemeine Anweisungen
ICM Controls
ICM Controls SC3211L Allgemeine Anweisungen
ICM Controls
ICM Controls SC 5811 Allgemeine Anweisungen
ICM Controls
ICM Controls SimpleComfort PRO SC5812 Bedienungsanleitung
ICM Controls
ICM Controls SC710 Allgemeine Anweisungen
ICM Controls
ICM Controls FS1500L Allgemeine Anweisungen
ICM Controls
ICM Controls SC 3001 Allgemeine Anweisungen
ICM Controls
ICM Controls SC2311L Allgemeine Anweisungen
ICM Controls
ICM Controls SC4812 Bedienungsanleitung
ICM Controls
ICM Controls SC700LV Bedienungsanleitung
ICM Controls
ICM Controls SC4011 Allgemeine Anweisungen
Beliebte Thermostat Handbücher anderer Marken
EWELLY
EWELLY EW-181 Bedienungsanleitung
Prolon
Prolon T1100 Montageanleitung
Computherm
Computherm Q20 Bedienungsanleitung
Heatmiser
Heatmiser neoStat Bedienungsanleitung
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung
