Icom IC-705 Installationsanleitung

This device complies with part 15 of the FCC Rules.

Operation is subject to the condition that this device does

not cause harmful interference.

BASIC MANUAL

1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan

HF/VHF/UHF ALL MODE

TRANSCEIVER

|705

Thank you for choosing this Icom product. This

product is designed and built with Icom’ s state

of the art technology and craftsmanship. With

proper care, this product should provide you

with years of trouble-free operation.

EXPLICIT DEFINITIONS

WORD DEFINITION

RDANGER! Personal death, serious injury

or an explosion may occur.

RWARNING! Personal injury, fire hazard or

electric shock may occur.

CAUTION Equipment damage may occur.

NOTE

Recommended for optimum

use. No risk of personal injury,

fire or electric shock.

BASIC MANUAL

SUPPLIED ACCESSORIES

LSome accessories are not supplied, or the shape

is different, depending on the transceiver version.

This product combines traditional analog

technologies with the Digital Smart

Technologies for Amateur Radio (D-STAR), for a

balanced package.

IMPORTANT

READ ALL INSTRUCTIONS carefully

completely before using the transceiver.

SAVE THIS INSTRUCTION MANUAL— This

instruction manual contains basic operating

instructions for the IC-705

. For advanced

operating instructions, see the Advanced

Manual for details.

The Advanced Manual is available at the

following internet address:

https://www.icomjapan.com/support/

FEATURES

• RF Direct Sampling System

The IC-705 employs an RF direct sampling

system under 25 MHz. RF signals are directly

converted to digital data in the ADC, and

then processed in the FPGA. This system is

a leading technology, marking an epoch in

amateur radio.

• Real-Time Spectrum Scope

The spectrum scope is class-leading in

resolution, sweep speed, and dynamic

range. When you touch the scope screen

on the intended signal, the touched area is

magnified. The large 4.3 inch color TFT touch

LCD offers intuitive operation.

• D-STAR operation

The IC-705 has the D-STAR Repeater (DR)

function.

• A 4.3 inch touch panel color display

• Multi-function control for easy settings

Speaker microphone

(0.8 m: 2.6 ft)

DC power cable

(1.5 m: 4.9 ft)

Cushion

Sheet

CW key plug

(3.5 mm:

1/8 inch stereo)

Spare fuse

(FGB 4 A)

Microphone

plate

Battery pack

This product includes RTOS “RTX” software,

and is licensed according to the software

license.

This product includes “zlib” open source

software, and is licensed according to the

open source software license.

This product includes “libpng” open source

software, and is licensed according to the

open source software license.

Refer to the “About the Licenses” page at the

end of the manual in English for information on

the open source software being used in this

product.

This software is based in part on the work of

the Independent JPEG Group, and is licensed

according to the open source software license.

FCC INFORMATION

This equipment has been tested and found

to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment generates,

uses and can radiate radio frequency energy

and, if not installed and used in accordance with

the instructions, may cause harmful interference

to radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment off and on, the user is encouraged

to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet on

a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/

TV technician for help.

WARNING: MODIFICATION OF THIS DEVICE

TO RECEIVE CELLULAR RADIOTELEPHONE

SERVICE SIGNALS IS PROHIBITED UNDER

FCC RULES AND FEDERAL LAW.

CAUTION: Changes or modifications to this

device, not expressly approved by Icom Inc.,

could void your authority to operate this device

under FCC regulations.

Icom is not responsible for the destruction,

damage to, or performance of any Icom or non-

Icom equipment, if the malfunction is because

of:

• Force majeure, including, but not limited to,

fires, earthquakes, storms, floods, lightning,

or other natural disasters, disturbances,

riots, war, or radioactive contamination.

• The use of Icom transceivers with any

equipment that is not manufactured or

approved by Icom.

DISPOSAL

The crossed-out wheeled-bin

symbol on your product, literature,

or packaging reminds you that in

the European Union, all electrical

and electronic products, batteries,

and accumulators (rechargeable batteries) must

be taken to designated collection locations at

the end of their working life. Do not dispose of

these products as unsorted municipal waste.

Dispose of them according to the laws in your area.

ABOUT CE AND DOC

Hereby, Icom Inc. declares that the

versions of IC-705 which have the

“CE” symbol on the product, comply

with the essential requirements of the

Radio Equipment Directive, 2014/53/EU, and

the restriction of the use of certain hazardous

substances in electrical and electronic

equipment Directive, 2011/65/EU. The full text

of the EU declaration of conformity is available

at the following internet address:

https://www.icomjapan.com/support/

BASIC MANUAL

ABOUT SPURIOUS SIGNALS

Spurious signals may be received near the

following frequencies. These are made in

the internal circuit and does not indicate a

transceiver malfunction:

• 28.378 MHz • 28.524 MHz • 29.621 MHz

• 50.467 MHz • 51.343 MHz • 51.509 MHz

• 51.564 MHz • 51.674 MHz • 52.222 MHz

• 52.661 MHz • 438.602 MHz

VOICE CORDING TECHNOLOGY

The AMBE+2™ voice coding Technology

embodied in this product is protected by

intellectual property rights including patent

rights, copyrights and trade secrets of Digital

Voice Systems, Inc. This voice coding

Technology is licensed solely for use within this

Communications Equipment.

The user of this Technology is explicitly

prohibited from attempting to extract, remove,

decompile, reverse engineer, or disassemble

the Object Code, or in any other way convert

the Object Code into a human-readable form.

U.S. Patent Nos.

#8,595,002, #8,359,197, #8,315,860,

#8,200,497, #7,970,606, #6,912,495 B2.

TRADEMARKS

Icom, Icom Inc. and the Icom logo are registered

trademarks of Icom Incorporated (Japan) in Japan,

the United States, the United Kingdom, Germany,

France, Spain, Russia, Australia, New Zealand, and/

or other countries.

The Bluetooth word mark and logos are registered

trademarks owned by the Bluetooth SIG, Inc. and

any use of such marks by Icom Inc. is under license.

Adobe, Acrobat, and Reader are either registered

trademarks or trademarks of Adobe Systems

Incorporated in the United States and/or other countries.

AMBE+2 is a trademark and property of Digital Voice

Systems Inc.

All other products or brands are registered

trademarks or trademarks of their respective holders.

iii

BASIC MANUAL

ABOUT THE TOUCH SCREEN

DTouch operation

In the Advanced Manual and the Basic Manual,

the touch operation is described as shown

below, with the beep tone ON.

Touch

If the display is touched briefly, one short

beep sounds.

Touch for 1 second

If the display is touched for 1 second, one

short and one long beep sound.

DTouch screen precautions

• The touch screen may not properly work when

the LCD protection film or sheet is attached.

• Touching the screen with your finger nails,

sharp topped object and so on, or touching

the screen hard may damage it.

• Tablet PC operations such as flick, pinch in,

and pinch out cannot be performed on this

touch screen.

DTouch screen maintenance

• If the touch screen becomes dusty or dirty,

wipe it clean with a soft, dry cloth.

• When you wipe the touch screen, be careful

not to push it too hard or scratch it with your

finger nails. Otherwise you may damage the

screen.

ABOUT THE MANUALS

You can use the following manuals to

understand and operate this transceiver.

(As of July 2020)

TIP: You can download each manual and

guide from the Icom website.

https://www.icomjapan.com/support/

Enter “IC-705” into the Search box in the site.

• Basic Manual (This manual)

Instructions for basic operations.

• Advanced Manual (PDF type)

Instructions for advanced operations in

English.

• CI-V Reference Guide (PDF type)

Describes the control commands used

in remote control operation (serial

communication with CI-V) in English.

• About the Share Pictures function (PDF type)

Describes how to use the Share Pictures

function in English.

For Reference

• HAM Radio Terms (PDF type)

A glossary of HAM radio terms in English.

To read the manuals or Guide, Adobe®Acrobat®

Reader®is required. If you have not installed it,

please down load the Adobe®Acrobat®Reader®

and install it to your PC. You can download it

from Adobe Systems Incorporated’s website.

BASIC MANUAL

ABOUT THE INSTRUCTIONS

The Advanced and Basic manuals are

described in the following manner.

“ ” (Quotation marks):

Used to indicate icons, setting items, and

screen titles displayed on the screen.

The screen titles are also written in uppercase

letters. (Example: FUNCTION screen)

[ ] (brackets):

Used to indicate keys.

Routes to the Set modes and Setting screens

Routes to the Set mode, Setting screens and

the setting items are described in the following

manner.

» SET > Time Set > Date/Time > Date

Instruction example

DSetting the date

1. Open the “Date” screen.

» SET > Time Set > Date/Time > Date

2. Touch [+] or [–] to set the date.

Detailed instruction

1. Push .

2. Touch [SET].

3. Touch [▲] or [▼] to scroll through the items.

LYou can also rotate to scroll through

the items.

4. Touch “Time Set.”

5. Touch “Date/Time.”

6. Touch “Date.”

• Opens the “Date” screen.

BASIC MANUAL

KEYBOARD ENTERING AND EDITING

LYou can select the full keyboard layout in “Full

Keyboard Layout” on the FUNCTION screen.

(p. 8-3)

» SET > Function > Full Keyboard Layout

Alphabet mode

Numeric mode

Symbol mode

Moves the cursor backward

Enters an uppercase letter

Selects alphabet mode or

numeric mode

Enters a space

Moves the cursor forward

Clears the entered character

Selects the character type

Saves the entry

Cancels the entry and returns

to the previous screen

Keyboard types

You can select the Full Keyboard or Tenkey pad

in “Keyboard Type” on the FUNCTION screen.

(p. 8-3)

» SET > Function > Keyboard Type

LYou can also temporarily switch in the QUICK

MENU screen by pushing .

Entering and editing

Menu Category Item Selectable characters Maximum

characters

SET My Station My Call Sign A to Z, 0 to 9, (space), / 8 + 4

TX Message [AB] [ab] [12] [!″#] 20

Time Set NTP Server Address A to Z, a to z, 0 to 9, - . 64

Bluetooth Set Bluetooth Device Information

(Edit Name) [AB] [ab] [12] [!″#] 9*1

WLAN Set SSID [AB] [ab] [12] [!″#] 32

Password [AB] [ab] [12] [!″#] 64

Network Name A to Z, 0 to 9, ! " # $ % & ( ) + , - . ; =

@ [ ] ^ 15

Network User 1/2 ID

[AB] [ab] [12] [!″#]

• Illegal characters: \ (space)

Network User 1/2 Password 16*2

Network Radio Name 16

SD Card Save Setting [AB] [ab] [12] [!″#]

• Illegal characters: / : ; * < > \ | 23

Export

MEMORY GROUP NAME,

MEMORY NAME [AB] [ab] [12] [!″#] 16

SCAN Program Scan Edge NAME [AB] [ab] [12] [!″#] 16

KEYER Keyer Memory A to Z, 0 to 9, (space), / ? ^ . , @

• “ *” (asterisk) has its own unique use. 70

DECODE RTTY Memory A to Z, 0 to 9, (space), ! $ & ? “ ‘ - / . , :

; ( ) ↵70

VOICE VOICE TX RECORD [AB] [ab] [12] [!″#] 16

CS UR, R1, R2 A to Z, 0 to 9, (space), / 8

MEMORY

Your Call Sign NAME [AB] [ab] [12] [!″#] 16

CALL SIGN A to Z, 0 to 9, (space), / 8

Repeater List GROUP NAME, NAME [AB] [ab] [12] [!″#] 16

SUB NAME [AB] [ab] [12] [!″#] 8

CALL SIGN, GW CALL SIGN A to Z, 0 to 9, (space), / 8

DV GW Internal Gateway

Settings

Gateway Repeater

(Server IP/Domain) A to Z, a to z, 0 to 9, - . 64

Terminal/AP Call sign,

Allowed Call Sign List A to Z, 0 to 9, (space) 8

GPS GPS TX Mode Unproto Address [AB] [ab] [12] [!″#] 56*3

Object Name, Item Name [AB] [ab] [12] [!″#] 9

Comment [AB] [ab] [12] [!″#] 43*4

GPS Message [AB] [ab] [12] [!″#] 20

GPS Memory GROUP NAME, NAME [AB] [ab] [12] [!″#] 16

DTMF DTMF MEMORY 0 to 9, A B C D * # 24

SEND Direct Input 0 to 9, A B C D * # 24

DR TO SELECT Direct input (UR)/(RPT) A to Z, 0 to 9, (space), / 8

BASIC MANUAL

USABLE CHARACTERS

You can enter and edit the items in the following table.

[AB]: A to Z, (space)

[ab]: a to z, (space)

[12]: 0 to 9, (space)

[!"#]:

! " # $ % & ′ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { |

} ˜ (space)

*1Except for “ICOM BT”

*2Minimum of 8 characters

*3Normally 12 characters

*4The maximum number of characters you can enter

depends on the data extension and altitude settings.

IMPORTANT.............................................................. i

FEATURES................................................................ i

EXPLICIT DEFINITIONS........................................... i

SUPPLIED ACCESSORIES...................................... i

FCC INFORMATION .................................................ii

DISPOSAL.................................................................ii

ABOUT CE AND DOC...............................................ii

ABOUT SPURIOUS SIGNALS..................................ii

ABOUT THE TOUCH SCREEN ...............................iii

DTouch operation..............................................iii

DTouch screen precautions ..............................iii

DTouch screen maintenance ............................iii

VOICE CORDING TECHNOLOGY ..........................iii

ABOUT THE MANUALS...........................................iii

TRADEMARKS.........................................................iii

ABOUT THE INSTRUCTIONS .................................iv

KEYBOARD ENTERING AND EDITING.................. v

USABLE CHARACTERS..........................................vi

PRECAUTIONS........................................................ix

BATTERY CAUTIONS..............................................xi

DBattery caution ...............................................xi

DCharging caution ...........................................xii

IMPORTANT NOTES ..............................................xii

DWhen using the GPS receiver.......................xii

DElectromagnetic Interference ........................xii

1 INITIAL SETUP........................................ 1-1

Selecting a location.................................. 1-1

Connecting a microphone........................ 1-1

Attaching the cushions............................. 1-1

Attaching the Battery pack....................... 1-1

Charging the battery pack........................ 1-2

DBattery icon .................................................1-2

DCharging with a USB cable .........................1-2

DCharging time..............................................1-2

2 PANEL DESCRIPTION............................ 2-1

Front panel............................................... 2-1

Bottom panel............................................ 2-2

Side panels .............................................. 2-3

Speaker Microphone................................ 2-3

Touch screen display ............................... 2-4

DFUNCTION screen......................................2-6

DMENU screen..............................................2-7

DQUICK MENU .............................................2-7

DMulti-function menus ...................................2-7

Multi-function dial..................................... 2-8

3 BASIC OPERATION................................ 3-1

When first applying power........................ 3-1

Selecting the mode .................................. 3-1

Turning power ON or OFF ....................... 3-1

Adjusting the volume level ....................... 3-1

Using the VFO mode ............................... 3-1

DSelecting VFO A or VFO B ..........................3-1

DEqualizing VFO A and VFO B......................3-1

Selecting the operating band ................... 3-2

Selecting the operating mode .................. 3-2

Setting the frequency............................... 3-3

DUsing the Main Dial .....................................3-3

DAbout the Tuning Step function ...................3-3

DChanging the Tuning Step........................... 3-3

DAbout the 1 Hz step Fine Tuning function ...3-3

DAbout the 1/4 Tuning function......................3-3

DAbout the Auto Tuning Step function...........3-3

DDirectly entering a frequency.......................3-4

DBand Edge Beep .........................................3-5

DEntering a Band Edge .................................3-5

Dial Lock function..................................... 3-8

RF gain and SQL level............................. 3-8

Meter display............................................ 3-9

DMeter display selection................................3-9

DMulti-function meter.....................................3-9

Adjusting the transmit output power......... 3-9

Setting the maximum transmit power..... 3-10

Adjusting the microphone gain............... 3-10

4 RECEIVING AND TRANSMITTING ........ 4-1

Preamplifiers............................................ 4-1

Attenuator ................................................ 4-1

RIT function.............................................. 4-2

DRIT monitor function ....................................4-2

Monitor function ....................................... 4-2

AGC function control................................ 4-3

DSelecting the AGC time

constant preset value ..................................4-3

DSetting the AGC time constant ....................4-3

Using the Digital Twin PBT ...................... 4-4

Selecting the IF filter ................................ 4-5

Selecting the IF filter shape ..................... 4-5

Notch Filter............................................... 4-6

DSelecting the Notch filter type......................4-6

DSetting the Manual Notch filter ....................4-6

Noise Blanker........................................... 4-7

DAdjusting the NB level and time ..................4-7

Noise Reduction....................................... 4-8

DAdjusting the Noise Reduction level............4-8

Setting the transmit filter width................. 4-8

TABLE OF CONTENTS

vii

BASIC MANUAL

Setting the Speech Compressor.............. 4-9

DSetting before using

the Speech Compressor function................4-9

DUsing the Speech Compressor function...... 4-9

Split frequency operation ....................... 4-10

DUsing the Quick Split function ...................4-10

DUsing the receive and transmit frequencies

set to VFO A and VFO B ........................... 4-11

Split Lock function...................................4-11

Operating CW .........................................4-11

DSetting the CW pitch control...................... 4-11

DSetting the key speed................................ 4-11

DUsing the Break-in function .......................4-12

DMonitoring the CW side tone.....................4-12

DAbout the electronic Keyer function...........4-13

Auto Tuning function .............................. 4-13

5 SCOPE OPERATION .............................. 5-1

Spectrum scope screen ........................... 5-1

DMarker .........................................................5-1

DUsing the Spectrum Scope..........................5-1

DCenter mode................................................5-2

DFixed mode..................................................5-2

DTouch screen operation...............................5-2

DMini scope screen .......................................5-2

Audio scope screen ................................. 5-3

DAUDIO SCOPE SET screen........................5-3

6 microSD CARD....................................... 6-1

About the microSD cards......................... 6-1

Saving data.............................................. 6-1

Inserting ................................................... 6-1

Formatting................................................ 6-1

Saving the setting data ............................ 6-2

Unmounting.............................................. 6-2

7 GPS OPERATION ................................... 7-1

Confirming the GPS signal receiving ....... 7-1

Checking your location............................. 7-1

GPS Logger function................................ 7-2

8 SET MODE .............................................. 8-1

Set mode description ............................... 8-1

Tone Control/TBW.................................... 8-2

Function ................................................... 8-2

My Station................................................ 8-8

DV Set...................................................... 8-8

QSO/RX Log.......................................... 8-10

Connectors............................................. 8-13

Display ................................................... 8-15

Time Set................................................. 8-18

Bluetooth Set ......................................... 8-18

WLAN Set .............................................. 8-20

SD Card ................................................. 8-22

Others .................................................... 8-23

9 CLOCK .................................................... 9-1

Setting the date and time......................... 9-1

DSetting the date ...........................................9-1

DSetting the current time ...............................9-1

DSetting the UTC offset.................................9-1

10 MAINTENANCE .................................... 10-1

Cleaning................................................. 10-1

Replacing fuse ....................................... 10-1

Resetting................................................ 10-1

DPartial reset ...............................................10-2

DAll reset .....................................................10-2

Troubleshooting ..................................... 10-3

11 SPECIFICATIONS ................................. 11-1

DGeneral...................................................... 11-1

DTransmitter ................................................ 11-1

DReceiver .................................................... 11-2

DWireless LAN............................................. 11-3

DBluetooth ................................................... 11-3

12 OPTIONS............................................... 12-1

Options................................................... 12-1

13 CONNECTOR INFORMATION.............. 13-1

[DC 13.8 V] ............................................ 13-1

Connecting an external

DC power supply.................................... 13-1

Grounding .............................................. 13-2

[SEND/ALC]........................................... 13-2

[KEY]...................................................... 13-2

[microUSB]............................................. 13-3

[SP] ........................................................ 13-3

[MIC] ...................................................... 13-3

[ANT]...................................................... 13-3

INSTALLATION NOTES .................................... I

SAFETY TRAINING INFORMATION................ II

ABOUT THE LICENSES ................................. III

INDEX............................................................... V

viii

BASIC MANUAL

RDANGER HIGH RF VOLTAGE! NEVER touch an

antenna, an antenna connector, or a ground terminal

while transmitting. This could cause an electrical

shock or burn.

RDANGER! NEVER operate the transceiver near

unshielded electrical blasting caps or in an explosive

atmosphere. This could cause an explosion and

death.

RDANGER! NEVER use or charge Icom battery

packs with non-Icom transceivers or non-Icom

chargers. Only Icom battery packs are tested and

approved for use with Icom transceivers or charged

with Icom chargers. Using thirdparty or counterfeit

battery packs or chargers may cause smoke, fire, or

cause the battery to burst.

RWARNING RF EXPOSURE! This transceiver

emits Radio Frequency (RF) energy. Extreme

caution should be observed when operating this

transceiver. If you have any questions regarding

RF exposure and safety standards please refer to

the Federal Communications Commission Office of

Engineering and Technology’s report on Evaluating

Compliance with FCC Guidelines for Human Radio

Frequency Electromagnetic Fields (OET Bulletin 65).

RWARNING! NEVER hold the transceiver so that

the antenna is very close to, or touching exposed

parts of the body, especially the face or eyes, while

transmitting. If the antenna is close to you, transmit

with low power.

RWARNING! NEVER operate the transceiver with

earphone, a headset, or other audio accessories at

high volume levels. If you experience a ringing in

your ears, reduce the volume or discontinue use.

RWARNING! NEVER apply AC power to the

[DC 13.8 V] jack on the transceiver side panel. This

could cause a fire or damage the transceiver.

RWARNING! NEVER apply more than 16 V DC to

the [DC 13.8 V] jack on the transceiver side panel.

This could cause a fire or damage the transceiver.

RWARNING! NEVER reverse the DC power cable

polarity. This could cause a fire or damage the

transceiver.

RWARNING! NEVER remove the fuse holder on

the DC power cable. Excessive current caused by a

short could cause a fire or damage the transceiver.

RWARNING! NEVER let metal, wire or other

objects contact the inside of the transceiver, or make

incorrect contact with connectors on the side panel.

This could cause an electric shock or damage the

transceiver.

RWARNING! NEVER operate or touch the

transceiver with wet hands. This could cause an

electric shock or damage to the transceiver.

RWARNING! NEVER operate the equipment if

you notice an abnormal odor, sound or smoke.

Immediately turn OFF the power and/or remove the

battery pack and the DC power cable. Contact your

Icom dealer or distributor for advice.

RWARNING! NEVER put the transceiver on an

unstable place where the transceiver may suddenly

move or fall. This could cause an injury or damage

the transceiver.

RWARNING! NEVER operate the transceiver

during a lightning storm. It may result in an electric

shock, cause a fire or damage the transceiver.

Always disconnect the power source and antenna

before a storm.

CAUTION: DO NOT expose the transceiver to

rain, snow or any liquids. They could damage the

transceiver.

CAUTION: DO NOT operate the transceiver unless

the flexible antenna, battery pack, and jack covers

are securely attached to the transceiver, and that the

antenna and battery pack are dry before attachment.

Exposing the inside of the transceiver to dust or

water will result in serious damage to the transceiver.

CAUTION: DO NOT operate the transceiver while

driving a vehicle. Safe driving requires your full

attention—anything less may result in an accident.

CAUTION: DO NOT short the terminals of the

battery pack. Shorting may occur if the terminals

touch metal objects such as a key, so be careful

when placing the battery packs (or the transceiver) in

bags, and so on. Carry them so that shorting cannot

occur with metal objects. Shorting may damage not

only the battery pack, but also the transceiver.

CAUTION: DO NOT change the internal settings

of the transceiver. This could reduce transceiver

performance and/or damage to the transceiver. The

transceiver warranty does not cover any problems

caused by unauthorized internal adjustments.

CAUTION: DO NOT install or place the transceiver

in a place without adequate ventilation, or block

any cooling vents on the rear of the transceiver.

Heat dissipation may be reduced and damage the

transceiver.

PRECAUTIONS

Andere Handbücher für IC-705

Inhaltsverzeichnis

Andere Icom Transceiver Handbücher

Icom

Icom IC-230 Bedienungsanleitung

Icom

Icom IC-718 Bedienungsanleitung

Icom

Icom IC-575A Bedienungsanleitung

Icom

Icom IC-F1610 Bedienungsanleitung

Icom

Icom IC-A110 Bedienungsanleitung

Icom

Icom IC-706MKII Bedienungsanleitung

Icom

Icom IC-F610 Bedienungsanleitung

Icom

Icom IC-E80D Bedienungsanleitung

Icom

Icom IC-F50V Bedienungsanleitung

Icom

Icom IC-7300 Installationsanleitung

Icom

Icom IC-745 Bedienungsanleitung

Icom

Icom IC-756 Bedienungsanleitung

Icom

Icom IC-281H Bedienungsanleitung

Icom

Icom IC-2SA Bedienungsanleitung

Icom

Icom IC-F6012 Bedienungsanleitung

Icom

Icom IC-201 Bedienungsanleitung

Icom

Icom IC-A200 Bedienungsanleitung

Icom

Icom IC-M56 Bedienungsanleitung

Icom

Icom IC-M800 Bedienungsanleitung

Icom

Icom IC-F30 Bedienungsanleitung

Icom

Icom 7100 Bedienungsanleitung

Icom

Icom IC-U81T Bedienungsanleitung

Icom

Icom UT-133 Bedienungsanleitung

Icom

Icom IC-A22 Bedienungsanleitung

Beliebte Transceiver Handbücher anderer Marken

Yaesu

Yaesu FT-7B Bedienungsanleitung

Kenwood

Kenwood ProTalk TK-3201 Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Kenwood

Kenwood TK-3180 Bedienungs- und Wartungshandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Kenwood

Kenwood TK-2217 Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Kenwood

Kenwood TS-590SG Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung

Uniden

Uniden UH820 Series Bedienungsanleitung