Icom IC-705 Einrichtungshandbuch

This manual describes instructions for advanced features and

instructions.

See the BASIC MANUAL that come with the transceiver for

precautions and basic operations.

ADVANCED MANUAL

HF/VHF/UHF ALL MODE

TRANSCEIVER

|705

INTRODUCTION

1 BATTERY CHARGING

2 ADVANCED OPERATIONS

3 SCOPE OPERATION (ADVANCED)

4 microSD CARD (ADVANCED)

5 VOICE RECORDER FUNCTIONS

6 VOICE TX MEMORY FUNCTION

7 MEMORY OPERATION

8 SCANS

9 OTHER FUNCTIONS

10 Bluetooth®OPERATION

11 WIRELESS LAN OPERATION

12 GPS OPERATION (ADVANCED)

13 D-STAR OPERATION (BASIC)

14 D-STAR OPERATION (ADVANCED)

15 ABOUT THE DV GATEWAY FUNCTION

16 MAINTENANCE (ADVANCED)

17 UPDATING THE FIRMWARE

18 ADVANCED CONNECTIONS

Thank you for choosing this Icom product. This product is designed and built with Icom’ s state of the art

technology and craftsmanship. With proper care, this product should provide you with years of trouble-

free operation.

This product combines traditional analog technologies with the new digital technology, Digital Smart

Technologies for Amateur Radio (D-STAR), for a balanced package.

TRADEMARKS

Icom, Icom Inc. and the Icom logo are registered

trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France,

Spain, Russia, Australia, New Zealand, and/or other countries.

The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of

such marks by Icom Inc. is under license.

Adobe, Acrobat, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the

United States and/or other countries.

APRS®is a registered trademark of Mr. Bob Bruninga in the U.S.A. and other countries.

Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other

countries.

Google, the Google Logo, Google Play, the Google Play logo, Android, and the Android logo are trademarks of

Google, LLC.

All other products or brands are registered trademarks or trademarks of their respective holders.

ABOUT THE MANUALS (As of July 2020)

You can use the following manuals to understand and operate this transceiver.

• Basic Manual (Comes with the transceiver)

Instructions for basic operations.

• Advanced Manual (This manual)

Instructions for advanced operations in English.

• CI-V Reference Guide (PDF type)

Describes the control commands used in remote control operation (serial communication with CI-V) in

English.

• About the Share Pictures function (PDF type)

Describes how to use the Share Pictures function in English.

For Reference

• HAM Radio Terms (PDF type)

A glossary of HAM radio terms in English.

TABLE OF CONTENTS

ABOUT THE MANUALS ..........................................i

TRADEMARKS............................................................ i

Functions and features of Adobe®Acrobat®Reader®. vi

1 BATTERY CHARGING�� 1-1

Battery information..................................... 1-1

DBattery life ..................................................... 1-1

DBattery icon ................................................... 1-1

Charging the battery pack.......................... 1-1

DCharging time................................................ 1-1

DCharging with a USB cable ........................... 1-2

DCharging with the supplied DC power cable . 1-2

DCharging with the optional rapid charger....... 1-3

Specifications for the battery charger and

battery pack ............................................... 1-4

DBC-202IP2  (optional) .......... 1-4

DBP-272 Li-ion  (supplied) .......... 1-4

2 ADVANCED OPERATIONS �� 2-1

VOX function.............................................. 2-1

DAdjusting the VOX function ........................... 2-1

∂TX function .............................................. 2-2

D∂TX monitor function .................................... 2-2

Operating CW (ADVANCED) ..................... 2-2

DAbout the CW Reverse mode........................ 2-2

DUsing the Memory Keyer function (KEYER).. 2-3

DKeyer memory edit menu (EDIT)................... 2-4

DContest number menu (001 SET) ................. 2-5

DKeyer Set menu (CW-KEY SET)................... 2-6

Operating RTTY (FSK) .............................. 2-7

DDisplaying the RTTY DECODE screen ......... 2-7

DRTTY decoding ............................................. 2-7

DTwin Peak Filter (TPF)................................... 2-7

DTransmitting an RTTY memory content......... 2-8

DEditing an RTTY memory .............................. 2-9

DTurning ON the RTTY log............................ 2-10

DViewing the RTTY log contents ................... 2-10

DRTTY DECODE LOG SET screen .............. 2-11

DRTTY DECODE SET screen....................... 2-12

Tone squelch operation............................ 2-13

DTCS code squelch operation................. 2-14

Repeater operation .................................. 2-15

DChecking the repeater input signal.............. 2-15

DSetting the repeater tone frequency............ 2-16

D1750 Hz tone burst...................................... 2-16

Duplex operation...................................... 2-17

Data communication ................................ 2-17

About the 5 MHz frequency band operation

(USA version only) ................................... 2-18

Weather channel operation

(USA version only) ................................... 2-19

DSelecting a Weather channel ...................... 2-19

DWeather alert function ................................. 2-19

3 SCOPE OPERATION (ADVANCED)�� 3-1

Spectrum Scope screen............................. 3-1

DAdjusting the sweep speed ........................... 3-1

DAdjusting the Reference level........................ 3-1

SCOPE SET screen................................... 3-2

4 microSD CARD (ADVANCED) �� 4-1

Loading the saved data files ...................... 4-1

Deleting a data file ..................................... 4-2

Displaying the microSD card information... 4-2

Importing or Exporting a CSV format file ... 4-3

DImporting ....................................................... 4-3

DExporting ....................................................... 4-4

About the microSD card’s folders .............. 4-5

5 VOICE RECORDER FUNCTIONS �� 5-1

Recording a QSO audio............................. 5-1

DQuick recording ............................................. 5-1

DBasic recording.............................................. 5-1

Playing back a QSO audio......................... 5-2

Checking the folder or file information ....... 5-3

Deleting files .............................................. 5-4

Deleting folders.......................................... 5-4

RECORDER SET screen........................... 5-5

PLAYER SET screen ................................. 5-6

Playing back audio on a PC....................... 5-6

6 VOICE TX MEMORY FUNCTION�� 6-1

Recording a Voice TX memory .................. 6-1

DRecording...................................................... 6-1

DPlaying back.................................................. 6-2

Entering a Voice TX memory name ........... 6-2

Transmitting a Voice memory content........ 6-3

DTransmitting................................................... 6-3

DRepeatedly transmitting................................. 6-3

DAdjusting the output level .............................. 6-4

VOICE TX SET screen .............................. 6-4

7 MEMORY OPERATION�� 7-1

Memory channels....................................... 7-1

Selecting a memory group......................... 7-1

Entering Memory channel contents ........... 7-1

iii

Selecting a Memory channel...................... 7-2

DSelecting with .................................. 7-2

DSelecting on the MEMORY screen................ 7-2

Selecting a Call channel ............................ 7-2

Copying the Memory channel contents...... 7-3

DCopying to the VFO....................................... 7-3

DCopying to another Memory channel ............ 7-3

Entering a group/Memory name ................ 7-4

DEntering a group name.................................. 7-4

DEntering a Memory name.............................. 7-4

Clearing a Memory channel....................... 7-5

MEMORY screen ....................................... 7-5

Memo Pad.................................................. 7-6

DSaving the contents into a Memo Pad........... 7-6

DCalling up the Memo Pads ............................ 7-6

DMEMO PAD screen ....................................... 7-6

8 SCANS �� 8-1

Scan types ................................................. 8-1

Preparation ................................................ 8-1

DSquelch status............................................... 8-1

SCAN screen ............................................. 8-2

SCAN SET screen ..................................... 8-3

Programmed scan and Fine Programmed

scan ........................................................... 8-4

DProgrammed scan operation......................... 8-4

Entering Scan Edges ................................. 8-5

Memory scan ............................................. 8-6

DMemory scan operation................................. 8-6

Select Memory scan .................................. 8-7

DSetting the Select Memory channels............. 8-7

DSelect Memory scan operation...................... 8-7

Mode Select scan ...................................... 8-8

DMode Select scan operation.......................... 8-8

∂F scan and Fine ∂F scan ........................ 8-9

D∂F scan operation......................................... 8-9

Temporary Skip function .......................... 8-10

9 OTHER FUNCTIONS �� 9-1

About “USB SEND/Keying”........................ 9-1

Protection function ..................................... 9-1

Measuring SWR......................................... 9-2

DSpot measurement........................................ 9-2

DPlot measurement ......................................... 9-3

NTP function .............................................. 9-4

DUsing the NTP Time Synchronize function.... 9-4

DUsing the NTP function ................................. 9-4

TABLE OF CONTENTS

Screen Capture function ............................ 9-5

DSetting the Screen Capture function ............. 9-5

DCapturing a screen........................................ 9-5

DViewing the captured screen......................... 9-5

Entering DTMF code.................................. 9-6

Transmitting the DTMF code ..................... 9-6

DTransmitting a DTMF code............................ 9-6

DTransmitting a DTMF code

(Direct Input).................................................. 9-6

DSelecting the DTMF transmit speed.............. 9-7

Home Channel function ............................. 9-7

DHome Channel setting................................... 9-7

DHome CH Beep function................................ 9-7

Share Pictures function.............................. 9-7

Setting the Opening picture ....................... 9-8

10 Bluetooth®OPERATION �� 10-1

Bluetooth®operations .............................. 10-1

Turning ON the Bluetooth®function......... 10-1

Connecting to a Bluetooth®headset........ 10-2

Bluetooth®Settings.................................. 10-3

DAF Output.................................................... 10-3

DHeadset Function Select ............................. 10-3

DAbout the Icom headset .............................. 10-4

Pairing with an Android™ device ............. 10-5

Disconnecting a Bluetooth®device

from the transceiver ................................. 10-6

Deleting a Bluetooth®device

from the pairing list................................... 10-6

Editing the Bluetooth®unit name ............. 10-7

Initializing the Bluetooth®unit .................. 10-7

The maximum number of paired devices. 10-7

11 WIRELESS LAN OPERATION�� 11-1

Wireless LAN operation ........................... 11-1

Turning ON the Wireless LAN function .... 11-1

Connecting to a Wireless Access Point (AP)

................................................................. 11-2

12 GPS OPERATION (ADVANCED)�� 12-1

GPS TX mode and TX format types ........ 12-1

Differences between older models........... 12-1

When a received signal

contains position data .............................. 12-2

TABLE OF CONTENTS

Checking your location............................. 12-2

DDisplaying Position Data ............................. 12-2

DGPS POSITION screens

and their meanings...................................... 12-3

DAbout the RX screen ................................... 12-4

DAbout the Course ........................................ 12-5

DAbout the Grid Locator ................................ 12-5

DChanging the GPS Memory or Alarm.......... 12-5

DChanging the Compass Direction................ 12-6

DSaving your own

or a received station’s position.................... 12-6

Checking GPS information

(Sky view screen)..................................... 12-7

Transmitting D-PRS data ......................... 12-8

DD-PRS ......................................................... 12-8

DOperating in the D-PRS mode..................... 12-8

DDisplayed items........................................... 12-9

DSetting D-PRS Position (Mobile/Base)...... 12-10

DSetting D-PRS Object/Item........................ 12-11

DSetting D-PRS Weather ............................ 12-12

DWeather station transmission.................... 12-13

DConfirming the weather data input ............ 12-13

DApplication setting ..................................... 12-13

DAbout the weather data content ................ 12-14

DDisplaying your location

using mapping software ............................ 12-15

Transmitting NMEA data ........................ 12-17

DSetting the GPS data sentence................. 12-17

DSetting a GPS message............................ 12-18

GPS Automatic Transmission ................ 12-18

GPS Memory ......................................... 12-19

DAdding a GPS Memory.............................. 12-19

DEntering the GPS Memory group name .... 12-21

DDeleting GPS Memory............................... 12-22

DRearranging the display order

of the GPS data......................................... 12-23

GPS Alarm ............................................. 12-24

DSetting the GPS Alarm function to All Memories

(all GPS Memories)................................... 12-25

DSetting the GPS Alarm function to RX

(a caller station)......................................... 12-26

GPS Logger function.............................. 12-27

DGPS Logger operating outline................... 12-27

DConfirming the GPS Logger function......... 12-27

DSetting the GPS record interval................. 12-27

DSetting the GPS record sentence.............. 12-28

DViewing the log data on a PC Map............ 12-29

GPS SET ............................................... 12-31

13 D-STAR OPERATION (BASIC)�� 13-1

Unique features of D-STAR ..................... 13-1

What is D-STAR?..................................... 13-1

About the DR function.............................. 13-2

Ways to Communicate

with the DR function................................. 13-2

Enter your call sign (MY)

into the transceiver................................... 13-3

at a gateway repeater .............................. 13-4

Making a Simplex call .............................. 13-5

Accessing repeaters ................................ 13-6

Receiving ................................................. 13-7

Capturing a call sign ................................ 13-8

Making a Local CQ call............................ 13-8

Making a Gateway CQ call ...................... 13-9

Calling an individual station ..................... 13-9

Saving to Memory channels................... 13-10

About Reflectors .................................... 13-11

DWhat is a reflector? ................................... 13-11

DUnlinking a reflector................................... 13-11

DLinking to a reflector.................................. 13-12

DUsing a reflector ........................................ 13-13

DReflector Echo Testing .............................. 13-13

DRequesting repeater information............... 13-14

Updating the repeater list....................... 13-15

When receiving no reply ........................ 13-17

14 D-STAR OPERATION (ADVANCED)�� 14-1

“FROM” (Access repeater) setting........... 14-1

DUsing your transceiver’s repeater list .......... 14-2

DUsing the DR scan ...................................... 14-3

DUsing the Near Repeater Search function... 14-4

DUsing TX History ......................................... 14-5

“TO” (Destination) setting......................... 14-6

DMaking a “Local CQ” (Local Area) call......... 14-7

DMaking a “Gateway CQ” (Gateway) call...... 14-7

DUsing “Your Call Sign” ................................. 14-7

DUsing RX History......................................... 14-8

DUsing TX History ......................................... 14-8

DDirectly entering (UR).................................. 14-9

DDirectly entering (RPT)................................ 14-9

REPEATER DETAIL screen................... 14-10

Message operation ................................ 14-11

DEntering a TX message............................. 14-11

DTransmitting a message ............................ 14-11

DDeleting a TX message............................. 14-11

Viewing received call signs.................... 14-12

DViewing the call signs

on the RX History screen .......................... 14-12

BK mode communication....................... 14-14

EMR communication.............................. 14-15

TABLE OF CONTENTS

DAdjusting the EMR AF level....................... 14-15

Automatic DV detection ......................... 14-16

Automatic Reply function ....................... 14-17

DRecording an Auto Reply message........... 14-18

DAuto Position Reply function ..................... 14-19

Data communication .............................. 14-20

DConnection ................................................ 14-20

DData communication application setting.... 14-20

DSending data ............................................. 14-20

DDV Fast Data function ............................... 14-21

Digital squelch functions ........................ 14-22

DThe Digital Call Sign squelch setting......... 14-22

DThe Digital Code Squelch setting.............. 14-22

Repeater list........................................... 14-23

DRepeater list contents................................ 14-23

Entering new information

into the repeater list ............................... 14-24

DRequired items

for the communication cases..................... 14-24

DEntering new information

into the repeater list................................... 14-25

DEditing repeater data................................. 14-28

DDeleting repeater data............................... 14-29

DRearranging the display order

of the repeaters ......................................... 14-30

DAdding new repeater information

from RX History......................................... 14-30

DSkip setting for the DR scan...................... 14-31

DEntering or editing a repeater group name 14-32

Your Call Sign ........................................ 14-33

DEntering Your Call Sign ............................. 14-33

DDeleting Your Call Sign.............................. 14-34

DRearranging the display order

of Your Call Signs...................................... 14-34

Manually setting Call Signs.................... 14-35

Are your settings correct?...................... 14-36

Using the RS-MS1A............................... 14-37

DRequired items .......................................... 14-37

DInstalling the application............................ 14-37

DWhen using a USB cable .......................... 14-37

DWhen using the Bluetooth function............ 14-38

15 ABOUT THE DV GATEWAY FUNCTION 15-1

About the DV Gateway function............... 15-1

When using the External Gateway function

................................................................. 15-2

About the Terminal

and Access Point (AP) Call sign .............. 15-3

DWhen operating in the Terminal mode......... 15-3

DWhen operating in the AP mode.................. 15-3

Setting up a network ................................ 15-4

DWhen connecting your device

to the Internet using a router ....................... 15-6

DWhen connecting your device

to the Internet using a cellular system......... 15-8

DWhen connecting your device

to the Internet using a mobile router............ 15-9

Setting up the device ............................. 15-10

DWhen using the Internal Gateway function 15-10

DWhen using the RS-MS3W software......... 15-12

DWhen using the RS-MS3A......................... 15-13

Terminal mode operation ....................... 15-14

DSetting the Terminal mode......................... 15-14

DOperating in the Terminal mode ................ 15-15

Access Point mode operation ................ 15-16

DSetting the Access Point mode.................. 15-16

DMaking a Gateway call

through the Access Point transceiver........ 15-17

Troubleshooting ..................................... 15-21

DError icons of the transceiver .................... 15-21

DTroubleshooting

for the Terminal mode operation................ 15-22

DTroubleshooting

for the Access Point mode operation......... 15-24

DError messages

of the RS-MS3W and the RS-MS3A.......... 15-26

16 MAINTENANCE (ADVANCED)�� 16-1

Cloning..................................................... 16-1

Touch screen calibration function............. 16-3

17 UPDATING THE FIRMWARE�� 17-1

General .................................................... 17-1

DAbout updating the firmware ....................... 17-1

DChecking the firmware version.................... 17-1

DPreparation.................................................. 17-2

DUnzipping the firmware folder...................... 17-2

Updating the firmware.............................. 17-3

18 ADVANCED CONNECTIONS �� 18-1

FSK and AFSK connections..................... 18-1

FUNCTIONS AND FEATURES OF ADOBE®ACROBAT®READER®

The following functions and features can be used with Adobe®Acrobat®Reader®.

• Keyword search

Click “Find (Ctrl+F)”

or “Advanced Search

(Shift+Ctrl+F)” in the Edit menu

to open the search screen.

This is convenient when

searching for a particular

word or phrase in this manual.

LThe menu screen may differ,

depending on the Adobe

Acrobat Reader version.

Click to open the find or search

screen or advanced search

screen.

• Printing out the desired pages�

Click “Find (Ctrl+F)” or “Advanced Search

(Shift+Ctrl+F)” in the Edit menu to open the

search screen.

This is convenient when searching for a

particular word or phrase in this manual.

LThe menu screen may differ, depending on the

Adobe Acrobat Reader version.

LSelect “A4” size to print out the page in the

original manual size.

• Read Out Loud feature�

The Read Out Loud feature reads aloud the

text in this PDF.

Refer to the Adobe Acrobat Reader Help for

the details.

(This feature may not be usable, depending on

your PC environment including the operating

system.)

LThe screen may differ, depending on the Adobe Acrobat Reader version.

• Find screen

• Advanced search screen

1-1

1� BATTERY CHARGING

Charging the battery pack

NOTE: Prior to using the transceiver for the first

time, the battery pack must be fully charged for

optimum life and operation.

LTo charge the battery pack while the transceiver is

ON, set the following item to “ON” (default).

» SET > Function > Charging (Power ON)

To charge the battery pack that is attached to the

transceiver:

• Connect a power source with a USB cable.

(p. 1-2)

• Connect a DC power supply with the supplied

DC power cable. (p. 1-2)

To charge the battery pack that is not attached

the transceiver, use the optional rapid charger.

(p. 1-3)

DCharging time

A DC power

supply A USB cable BC-202IP2

(Optional)

Approximately

2.3 hours*1

Approximately

3.2 hours*1*2

Approximately

2 hours

*1The transceiver is OFF while charging.

*2When using a 2 A output USB port and a cable that

is compatible with the rapid charging.

Battery information

DBattery life

After the charging is completed, the battery life

will be approximately 3 hours when:

• Operating mode: FM

• Power save setting: Auto (Short)

• Duty cycle: TX : RX : Standby = 1 : 1: 8

(based on operating style)

DBattery icon

Icon Battery status

The battery is being charged.

The battery has sufficient charge.

The battery is exhausted to some extent.

The battery is nearing exhaustion.

Blinking The battery is almost fully exhausted.

No icon

When a DC power supply (13.8 V DC) is

connected, the battery is not being charged

because:

• The battery is completely charged.

• “Charging (Power ON)” is set to “OFF.”

LWhen the transceiver’s display is OFF, the charging

indicator lights orange while charging.

NOTE: BE SURE to replace the battery pack

with a new one approximately five years after

manufacturing, even if it still holds a charge.

The material inside the battery cells will become

weak after a period of time, even with little

use. The estimated number of times you can

charge the pack is between 300 and 500. Even

when the pack appears to be fully charged, the

operating time of the transceiver may become

short when:

• Approximately five years have passed since the

pack was manufactured.

• The pack has been repeatedly charged.

TIP: Keep the battery terminals clean. It’s a

good idea to occasionally clean them.

1-2

1. BATTERY CHARGING

Charging the battery pack

DC 13.8 V/5 A or

Fuses

(FGB 4 A)

Black

White

Supplied DC power cable

GND

To [DC 13.8 V] jack

Transceiver

DCharging with the supplied DC power cable

You can charge the battery pack with the supplied DC power cable.

LWhen connecting a DC power cable, the transceiver needs:

• DC 13.8 V (Capacity: At least 5 Amps)

• A power supply with an over current protective line, and low voltage fluctuation or ripple.

NOTE:

• Confirm that the transceiver is OFF before connecting the DC power cable.

• You cannot connect the optional cigarette lighter cable (CP-22 and CP-23L) to the IC-705’s [DC 13.8 V] jack.

• If the applied voltage from the connected power source decreases, the battery pack is not charged, and the

battery pack is used as a power source while transmitting.

In this case, you cannot transmit if the battery pack is exhausted.

DCharging with a USB cable

You can charge the battery pack with a USB cable.

NOTE:

• You may not be able to charge:

- Depending on your USB cable or power adapter.

- When using a USB hub, or connected to a low output USB port.

• Charging time may differ, depending on the USB port.

• To use a mobile device or a PC as an external power source, set the following item to “ON” (default).

» SET > Function > USB Power Input (Phone, Tablet, PC)

• The battery pack is used as a power source while transmitting, even when an external power source is connected.

Therefore, you cannot transmit if the battery pack is exhausted.

To a USB port

To the [microUSB] port

PC,

Mobile device

Power adapter or

external battery

(User supplied)

USB cable

RWARNING! NEVER

reverse the DC power

cable polarity.

Center positive

1-3

1. BATTERY CHARGING

Charging the battery pack

DCharging with the optional rapid charger

The optional BC-202IP2  rapidly

charges the battery pack.

LThe charging indicator lights orange while charging,

and lights green when charging is completed.

LWhen about 90% of the battery capacity is charged,

the BC-202IP2 stops charging and the charging

indicator lights green. Therefore, the battery life

will be a little shorter than when charging with the

transceiver.

Approximate charging time: 2 hours

Charging note

RDANGER! NEVER use a battery pack that is not

manufactured or approved by Icom.

• The BC-202IP2  can only charge

the BP-271 or BP-272 Li-ion . Other

types of rechargeable batteries, Ni-Cd or Ni-MH

cannot be charged.

• If the charging indicator blinks orange, there may

be a problem with the battery pack or charger.

Contact your dealer if you have problems charging

a new battery pack.

• NEVER use other than specified cable.

Guide rail

Tabs

Battery pack

To an AC outlet

Power adapter

The CP-22 or CP-23L can

also be used instead of

the power adapter.

LEnsure the guide rails on the

battery pack are correctly

aligned with the tabs inside the

charger.

Screws

(Self tapping screws: 3.5 × at least 30 mm)

Purchase separately. Using screws is

recommended to secure the charger.

Charging indicator

• Lights orange: While charging

• Lights green: Charging is completed.

• Blinks orange: A charging error has occurred.

Andere Handbücher für IC-705

Inhaltsverzeichnis

Andere Icom Transceiver Handbücher

Icom

Icom IC-F1821D Bedienungsanleitung

Icom

Icom IC-F210 Bedienungsanleitung

Icom

Icom IC-A210 Bedienungsanleitung

Icom

Icom IC-9100 Bedienungsanleitung

Icom

Icom IC-F3021T/S Bedienungsanleitung

Icom

Icom IC-F7010T Bedienungsanleitung

Icom

Icom IC-M803 Bedienungsanleitung

Icom

Icom IC-T70A Bedienungsanleitung

Icom

Icom IC-A110 Bedienungsanleitung

Icom

Icom IC-751 Bedienungsanleitung

Icom

Icom IC-730 Bedienungsanleitung

Icom

Icom IC-GM651 Bedienungsanleitung

Icom

Icom IC-735 Bedienungsanleitung

Icom

Icom IC-A220 Bedienungsanleitung

Icom

Icom IC-F510 Bedienungsanleitung

Icom

Icom IC-746PRO Bedienungsanleitung

Icom

Icom IC-F31GS Bauanleitung

Icom

Icom IC-1275A Bedienungsanleitung

Icom

Icom IC-M36 Bedienungsanleitung

Icom

Icom IC-F6062 Bedienungsanleitung

Icom

Icom IC-707 Bedienungsanleitung

Icom

Icom iC-M605 Bedienungsanleitung

Icom

Icom IC-A24 Bedienungsanleitung

Icom

Icom IC-F21 Bedienungsanleitung

Beliebte Transceiver Handbücher anderer Marken

Yaesu

Yaesu FT-7B Bedienungsanleitung

Kenwood

Kenwood ProTalk TK-3201 Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Kenwood

Kenwood TK-3180 Bedienungs- und Wartungshandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Kenwood

Kenwood TK-2217 Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Kenwood

Kenwood TS-590SG Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung

Uniden

Uniden UH820 Series Bedienungsanleitung