Icom IC-F3160 SERIES Bedienungsanleitung

OPERATING GUIDE

OPERATING GUIDE FOR

IC-F3160/F4160 SERIES

BIIS 1200/MDC 1200 SYSTEM/

LTR®/IDAS OPERATION

Thank you for purchasing this Icom transceiver.

The BIIS 1200/MDC 1200 system/LTR®/IDAS (Icom Digital

Advanced System) functions are available to your IC-F3160/

F4160 series transceiver.

READ ALL INSTRUCTIONS carefully and completely

before using the transceiver.

SAVE THIS OPERATING GUIDE — This operating

guide contains important operating instructions for;

•

IC-F3161T, IC-F3161S, IC-F3161DT, IC-F3161DS,

IC-F3162T, IC-F3162S, IC-F3163T, IC-F3163S

VHF TRANSCEIVERS

•

IC-F4161T, IC-F4161S, IC-F4161DT, IC-F4161DS,

IC-F4162T, IC-F4162S, IC-F4163T, IC-F4163S

UHF TRANSCEIVERS

NOTE: In this operating guide, the LCD illustration is de-

scribed using the 2 lines indication mode.

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom

Incorporated (Japan) in Japan, the United States, the United Kingdom,

Germany, France, Spain, Russia and/or other countries.

LTR is a registered trademark of the E.F.Johnson Company.

All other products or brands are registered trademarks or trademarks of their

respective holders.

IMPORTANT TABLE OF CONTENTS

IMPORTANT.......................................................................... i

TABLE OF CONTENTS......................................................... i

1 PREPARATION............................................................1–2

 ■ Programmable function keys ........................................1

2 BIIS 1200 OPERATION .............................................3–13

 ■ Setting example............................................................3

 ■ Receiving a call ............................................................3

 ■ Transmitting a call.........................................................5

 ■ Receiving a message...................................................7

 ■ Transmitting a status.....................................................9

 ■ Transmitting an SDM ..................................................10

 ■ Position data transmission..........................................11

 ■ Printer connection ......................................................12

 ■ BIIS ANI .....................................................................12

 ■ Transmitting an Emergency call..................................12

 ■ Man Down Emergency Call........................................13

 ■ BIIS indication ............................................................13

 ■ Stun function ..............................................................13

 ■ Priority A channel selection........................................13

TABLE OF CONTENTS

3 MDC 1200 SYSTEM OPERATION ..........................14–21

 ■ MDC 1200 system operation......................................14

 ■ Receiving a call ..........................................................14

 ■ Transmitting a call.......................................................17

 ■ Man Down Emergency Call........................................21

 ■ Status message transmission ....................................21

4 LTR®OPERATION...................................................22–23

 ■ Receiving a call ..........................................................22

 ■ Transmitting a call.......................................................23

5 IDAS OPERATION ..................................................24–41

 ■ IDAS operation ...........................................................24

 ■ IDAS-Trunk operation .................................................24

 ■ Receiving a call ..........................................................24

 ■ Transmitting a call.......................................................28

 ■ Man Down Emergency Call........................................40

 ■ Position data transmission..........................................40

 ■ Status message transmission ....................................41

 ■ Printer connection ......................................................41

 ■ Encryption function.....................................................41

1PREPARATION

■Programmable function keys

The following functions can be assigned to [EMR],[Side1],

[Side2], [Side3], [P0], [P1], [P2] and [P3] programmable

function keys.

Consult your Icom dealer or system operator for details con-

cerning your transceivers programming.

If the programmable function names are bracketed in the fol-

lowing explanations, the speciﬁc key is used to activate the

function depends on the programming.

DFor BIIS 1200 operation only

BIIS BUTTON KEY “BIIS”

➥Push to toggle the call ID list, transmit message and

stand-by operation.

➥Push to toggle between queue channel and received mes-

sage record indication after queue channel is selected.

➥Push and hold for 1 sec. to select queue channel indica-

tion.

STATUS UP/DOWN KEYS “STUP”/“STDN”

➥During stand-by operation, push to display the transmit

status indication and select a status number.

➥When a received SDM (Short Data Message) is displayed,

push to cancel the automatic scroll and scroll the mes-

sage manually.

➥When an SDM that contains more than 12 characters is

displayed, push to scroll the message manually.

DFor MDC 1200 system operation only

MDC CALL KEY “CALL”

➥Push to enter the MDC menu selection mode. Then select

the desired MDC menu from “SELCALL,” “CALALERT,”

“STUN,” “REVIVE,” “RADIOCHK,” “STATUS,” “MSG” and

“CALL LOG” using [CH Up] or [CH Down].

After selection, push this key again to enter the transceiv-

er alias selection mode.

• No operation is performed for about 15 sec., the transceiver

returns to the normal operation condition.

➥While in the transceiver alias selection mode, push to

return to the MDC menu selection mode.

MDC SELCALL KEY “SC”

Push to enter the transceiver alias selection mode for

SelCall.

• After the desired alias selection, push [PTT] to transmit a SelCall.

• No operation is performed for about 15 sec., the transceiver

returns to the normal operation condition.

MDC CALLALERT KEY “CA”

Push to enter the transceiver alias selection mode for

CallAlert.

• After the desired alias selection, push [PTT] to transmit a Call

Alert.

• No operation is performed for about 15 sec., the transceiver

returns to the normal operation condition.

DFor LTR®operation only

PHONE KEY “PHN”

Push to connect or disconnect the telephone network con-

nection.

DFor IDAS operation only

DIGITAL BUTTON KEY “DIGI”

➥Push to enter the application selection mode.

➥Push and hold for 1 sec. to toggle the call type between

Individual and Talkgroup, then enter the application selec-

tion mode automatically.

• Select the desired application from “VOICE,” “CALALERT,”

“STUN,” “KILL,” “REVIVE,” “REM MON,” “RADIOCHK,”

“STATUS,” “MSG,” “STAT POL” and “CALL LOG” using

[CH Up] or [CH Down].

➥During the application selection mode, push to enter the

Individual or Talkgroup ID selection mode.

• If “STATUS” or “MSG” is selected as the application, the mes-

sage selection mode appears. After the desired message is

selected using [CH Up] or [CH Down], push again to enter the

Individual or Talkgroup ID selection mode. (pgs. 34, 35)

➥During the application selection mode, push and hold for

1 sec. to return to the normal operation condition.

STATUS UP/DOWN KEYS “STUP”/“STDN”

➥When a received SDM is displayed, push to cancel the

automatic scroll and scroll the message manually.

➥When an SDM that contains more than 12 characters is

displayed, push to scroll the message manually.

PREPARATION

2BIIS 1200 OPERATION

■Setting example

The following key functions are recommended to be as-

signed to each programmable key for the BIIS 1200 opera-

tion. The key function can be assigned by your dealer. Ask

your dealer for details.

NOTE: During BIIS 1200 operation, MDC 1200 system,

LTR®, and IDAS operations are not available.

[Call] : Push to transmit a BIIS call when the se-

lected channel is an MSK channel.

• “CALL” is displayed on the key indicator.

[BIIS Button] : Push to select the call list ID/transmit

message, or push to display the receive

message record for selection.

• “BIIS” is displayed on the key indicator.

When this key is pushed, “BIIS” is inverted

as “ ”.

[TX Code Enter] :

Push to enter the ID code edit mode di-

rectly.

• “TXCE” is displayed on the key indicator.

[Moni(Audi)] : Push this key after the communication to

send a ‘Clear down’ signal during MSK

channel operation.

[CH Up]/[Down] : During stand-by operation, push to select

the operating channel.

After pushing [BIIS Button] or [TX Code

CH Enter], push to select call list or TX

code channel, respectively.

■Receiving a call

DIndividual call

qWhen an individual call is received;

• Beeps sound.

• “ ” appears and the mute is released.

• The programmed text message (e.g.“CALLING”) and the call-

ing station ID (or text) is displayed when the indication mode is

2 lines.

• The programmed text message (e.g.“CALLING”) and the call-

ing station ID (or text) is displayed alternately when the indica-

tion mode is 1 line, depending on the setting.

• “ ” appears or blinks depending on the setting.

1234

1111

TXCECALL BIIS

TXC

Calling station ID

Own ID

Appears Appears or

blinks

wPush and hold [PTT], then speak into the microphone at

a normal voice level.

• TX indicator lights red.

eRelease [PTT] to return to receive.

• BUSY indicator lights green while receiving a signal.

rTo ﬁnish the conversation, push [Moni(Audi)] to send the

‘Clear down’ signal.

• Either station can send a ‘Clear down’ signal.

• “CLR DOWN” is displayed for 2 sec. (approx.).

• “ ” disappears and the transceiver returns to stand-by opera-

tion.

BIIS 1200 OPERATION

DGroup call

qWhen a group call is received;

• Beeps sound.

• “ ” appears and the mute is released.

•

The programmed text message (e.g.“GROUP”) and the calling sta-

tion ID (or text) is displayed when the indication mode is 2 lines.

• The programmed text message (e.g.“GROUP”) and the calling

station ID (or text) is displayed alternately when the indication

mode is 1 line, depending on the setting.

• “ ” appears or blinks depending on the setting.

4001

1111

TXCECALL BIIS

TXC

Group ID

Calling station ID

Appears Appears or

blinks

wPush and hold [PTT], then speak into the microphone at

a normal voice level.

• TX indicator lights red.

NOTE: Only one station is permitted to speak.

eRelease [PTT] to return to receive.

• BUSY indicator lights green while receiving a signal.

rTo ﬁnish the conversation, push [Moni(Audi)] to send the

‘Clear down’ signal.

• Either station can send a ‘Clear down’ signal.

• “CLR DOWN” is displayed for 2 sec. (approx.)

•

“ ” disappears and the transceiver returns to stand-by operation.

DDisplaying the received call record

— Queue indication

The transceiver memorizes the calling station ID in the mem-

ory. Up to 3 calls can be memorized, and the oldest call re-

cord is erased when a 4th call is received. However, once

the transceiver is powered OFF, the all records are cleared.

qPush and hold [BIIS Button] for 1 sec.

• Displays following indication.

When a record is available

QUEUE

–QUEUE!–

TXCECALL

TXC

BIIS

When no record is available

QUEUE

NO QUEUE

TXCECALL

TXC

BIIS

wPush [CH Up] or [CH Down] to select the desired call.

ePush and hold [BIIS Button] for 1 sec. again to return to

stand-by operation.

• When no operation is performed for 30 sec., the transceiver re-

turns to stand-by operation automatically.

2BIIS 1200 OPERATION

■Transmitting a call

A total of 3 ways for code selection are available—selecting

the call code from memory, entering the call code from the

keypad and calling back from the queue channel record.

DUsing call memory

qDuring stand-by operation, push [BIIS Button] to enter

the call code memory channel selection mode.

• “ ” appears.

TXCECALL

TXC

BIIS

STATION1

0001

Appears

wPush [CH Up] or [CH Down] to select the desired call

code.

ePush [Call] or [PTT]* to call.

*PTT call can be made only when PTT call capability is permit-

ted.

NOTE: When no answer back is received, the trans-

ceiver repeats the call 3 times (default) automatically,

and “WAIT”is displayed during each call. However, an

error beep sounds and “FAILED”is displayed when

no answer back is received after the calls.

rPush [PTT] to transmit; release to receive.

tPush [Moni(Audi)] to send the ‘Clear down’ signal.

DCalling back from the queue channel

qDuring stand-by operation, push and hold [BIIS Button]

for 1 sec. to enter the queue memory channel selection

mode.

QUEUE

–QUEUE!–

TXCECALL

TXC

BIIS

wPush [CH Up] or [CH Down] to select the desired record.

ePush [Call] or [PTT]* to call.

* PTT call can be made only when PTT call capability is permit-

ted.

NOTE: When no answer back is received, the trans-

ceiver repeats the call 3 times (default) automatically,

and “WAIT”is displayed during each call. However, an

error beep sounds and “FAILED”is displayed when

no answer back is received after the calls.

rPush [PTT] to transmit; release to receive.

tPush [Moni(Audi)] to send the ‘Clear down’ signal.

BIIS 1200 OPERATION

DDirect code entry

qDuring stand-by operation, push [TX Code Enter] to

enter the TX code edit mode.

• Code digit for editing blinks.

TXCECALL

TXC

BIIS

0500

Push [TX Code Enter] to select the desired digit to be ed-

ited.

• Digit for editing differs according to the setting.

eSet the desired digit using [CH Up]/[CH Down] or 10-key-

pad*.

* 10-key versions only

rPush [TX Code Enter] to set the digit, then the digit to

the right will blink automatically.

• When the 10-keypad is used for setting, the digit to the right will

blink automatically without pushing [TX Code Enter].

tRepeat eand rto input all allowable digits.

yPush [Call] or [PTT]* to call.

* PTT call can be made only when PTT call capability is permit-

ted.

NOTE: When no answer back is received, the trans-

ceiver repeats the call 3 times (default) automatically,

and “WAIT”is displayed during each call. However, an

error beep sounds and “FAILED”is displayed when

no answer back is received after the calls.

uPush [PTT] to transmit; release to receive.

iPush [Moni(Audi)] to send the ‘Clear down’ signal.

For your information

When the “UpDate” setting for the call code is enabled, the

set code is overwritten into the call code memory.

2BIIS 1200 OPERATION

■Receiving a message

DReceiving a status message

qWhen a status message is received;

• Beeps sound.

• The calling station ID (or text) and the status message is dis-

played alternately when the indication mode is 1 line, depend-

ing on the setting.

TXCECALL

TXC

BIIS

RX Status 01

BASE

wPush [Moni(Audi)] to return to stand-by operation.

NOTE: Only the calling station ID (or text) is displayed

(no message is displayed alternately) when the scroll

timer is set to ‘OFF.’ In this case, push [Status Up]/

[Status Down] to display the status message manually.

DReceiving an SDM (Short Data Message)

qWhen an SDM is received;

• Beeps sound.

• The calling station ID (or text) and the SDM is displayed alter-

nately when the indication mode is 1 line, depending on the set-

ting.

TXCECALL

TXC

BIIS

Thank you!

BASE

wWhen the received SDM includes more than 12 charac-

ters, the message scrolls automatically, when the auto-

matic scroll function is activated.

•

Push [Status Up]/[Status Down] to scroll the message manually.

TXCECALL

TXC

BIIS

How about you?

BASE

Scrolls

ePush [Moni(Audi)] to return to stand-by operation.

Andere Handbücher für IC-F3160 SERIES

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Icom Transceiver Handbücher

Icom

Icom IC-7610 Einrichtungshandbuch

Icom

Icom IC-M602 Bedienungsanleitung

Icom

Icom IC-706 Bedienungsanleitung

Icom

Icom IC-255A Bedienungsanleitung

Icom

Icom IC-7410 Bedienungsanleitung

Icom

Icom IC-260A Bedienungsanleitung

Icom

Icom ID-51A Installationsanleitung

Icom

Icom IC-F4029SDR Bedienungsanleitung

Icom

Icom IC-215 Bedienungsanleitung

Icom

Icom IC-F3262DT Bedienungsanleitung

Icom

Icom IC-A24E Bedienungsanleitung

Icom

Icom IC-280E Bedienungsanleitung

Icom

Icom IC-24ET Bedienungsanleitung

Icom

Icom IC-910H Bedienungsanleitung

Icom

Icom IC-F25 Bedienungsanleitung

Icom

Icom IC-F30LT Bedienungsanleitung

Icom

Icom IC-2100H Bedienungsanleitung

Icom

Icom IC-M87 Bedienungsanleitung

Icom

Icom IC-F3162D series Bedienungsanleitung

Icom

Icom IC-F61M Bedienungsanleitung

Icom

Icom iF29DR Bedienungsanleitung

Icom

Icom IC-M801E Bedienungsanleitung

Icom

Icom IC-M423 Bedienungsanleitung

Icom

Icom A25C SPORT 66 USA Stücklistenhandbuch

Beliebte Transceiver Handbücher anderer Marken

Yaesu

Yaesu FT-7B Bedienungsanleitung

Kenwood

Kenwood ProTalk TK-3201 Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Kenwood

Kenwood TK-3180 Bedienungs- und Wartungshandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Kenwood

Kenwood TK-2217 Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Kenwood

Kenwood TS-590SG Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung

Uniden

Uniden UH820 Series Bedienungsanleitung