2PANEL DESCRIPTION
2-3
Function display (for the Portable type transceiver)
q SIGNAL STRENGTH ICON
Displays the relative receive signal strength.
wLOW POWER ICON
Displayed when the output power is set to Low.
LWhenthebatterychargedecreasestoaspecied
level, low power is automatically selected.
e AUDIBLE ICON
Displayed when the channel is in the Audible
(unmute) mode.
r SCRAMBLER/ENCRYPTION ICON
In the Analog mode
Displayed when the Voice Scrambler function is
ON.
In the Digital mode
zDisplayed when the Voice Encryption function
is ON.
zBlinks when decoding an encrypted signal.
t SCAN ICON
zBlinks while scanning.
zDisplayed when the scan pauses.
y MESSAGE ICON
Displayed when the transceiver receives a
message (Short Data Message or Status
Message).
u BELL ICON
Displayed when a matching signal is received,
depending on the presetting.
i GPS/COMPANDER ICON
z“ ” is displayed when the GPS receiver
acquires GPS signals from satellites and the
“GPS Indicator” setting is ON.
z“ ” is displayed when the Compander function
is activated and the “GPS Indicator” setting is
OFF.
o BATTERY ICON
Displayed or blinks to indicate the battery status.
Indication
Battery
status Full Mid Charging
required
Battery
exhausted
blinks when the battery is over charged.
blinks when the battery is exhausted.
!0 ALPHANUMERIC READOUT
Displays the operating channel number, channel
name, Menu contents, and so on.
LDepending on the “Display Line” setting, characters
are displayed in 1 line or 2 lines on the display. In this
operating guide, the display illustration is described
as having characters displayed in 2 lines.
!1 KEY ICONS
Displays the assigned Software key function of the
[P0], [P1], [P2] and [P3] front panel keys.
001 ch-01
Icom Inc.
SET ZONE LOCK H/L
ENTBACK
PRIVATE
ID 0000002
dPMRCLRMENUCALL
0001
1234
CALLMONTXCEBIIS
CONTACT
ENTBACK
CONTACT
qwe rt y u i o
!0
!1
