ICON MOBILE U Bedienungsanleitung

User manual

4-In / 4-Out Recording USB Interface with Smart Device connecting I/O

(Digital & Analog) for live streaming applications

Important Safety Instructions

1. Read this manual thoroughly before using this unit.

2. Keep this manual for future reference.

3. Take notice of and comply with all warnings included in the user's manual or indicated on the

appliance.

4. Follow all instructions included in this manual.

5. Do not expose this unit to rain or moisture. Avoid having water or other liquids spilled on this

unit.

6. When cleaning the cabinet or other parts of this appliance, use only a dry or slightly damp soft

cloth.

7. Do not block any ventilation openings or interfere with the proper ventilation of this unit. Install

in accordance with the manufacturer's instructions.

8. Do not use or store near any heat sources such as radiators, heat registers, stoves, or other heat-

producing appliances.

9. Do not interfere with the safety purpose of the polarized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A grounding-type plug has two blades and a third

grounding prong. These are designated for your safety. If the provided plug does not fit into your

outlet, consult an electrician.

10. Protect the power cord from being walked on or otherwise damaged by items placed on or

against them. Particular attention should be given to the plugs, receptacles, and the point where

the cord exits the appliance.

11. To avoid the risk of electrical shock, do not touch any exposed wiring while the unit is in

operation.

12. Only use attachments/accessories specified by the manufacturer.

13. Unplug this unit and all connected electrical equipment during lightning storms or when left

unused a long period of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the appliance has

been damaged in any way or fails to operate normally.

WARNING: To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture

Introductions.............................................................................................4

What’s in the package? ............................................................................4

Features ...................................................................................................6

Front Panel ..............................................................................................8

Rear Panel................................................................................................9

Mac driver installation.............................................................................10

Install ProDriver 4 with LoopBack function.............................................10

Mixer control panel(Mac)........................................................................14

Windows driver installation.....................................................................16

ProDriver4 ..............................................................................................19

Mixer control panel(Windows) ................................................................20

Settings (Sample rate and latency settings)...........................................23

ProDriver hosting rack (Mac/Windows) ..................................................27

Hardware Connections

(Use with Mac/PC and mobile device simultaneously)...........................35

Different types of microphone connection ..............................................36

method diagram......................................................................................36

Specications .........................................................................................37

Services..................................................................................................38

Contents

Introductions

What’s in the package?

●MobileU Dyna USB Recording Interface

●Quick Start Guide x 1

●USB 2.0 cable (Type C) x 1

●3.5mm TRS audio cable x 1

Firstly, congratulations on your purchase of the ICON Pro Audio MobileU Dyna digital

audio Interface! In these pages, you'll nd a detailed description of the features of

the MobileU Dyna digital audio Interface, as well as a guided tour through its front

and rear panels, step-by-step instructions for their setup and use and a full list of

specications. As you read through the ma- nual, you will spot orange boxes - these

denote actions for you to complete which will help you get underway.

As with most electronic devices, we strongly recommend you retain the original

packaging. In the unlikely event that the product is returned for servicing, the original

packaging (or reasonable equivalent) is required. With proper care and adequate air

circulation, your MobileU Dyna digital audio interfacewill operate awlessly for many

years to come.

We trust that this product will provide years of excellent service and in the unlikely

event that your product does not perform to the highest standard, every effort will be

made to address the issue.

personal account

1. Check serial number of your device

Please go to http:// iconproaudio.com/registration or scan the QR code

below.



Input your device’s serial number and the other information on the screen. Click

“Submit”.



A message will pop up showing your device information such as model name

and its serial number - Click “Register this device to my account” or if you see

any other message, please contact our after-sales service team



2. Log in to your personal account page for existing user or

Existing user: Please log into your personal user page by inputing your

user name and password.



New user: Please click “Sign Up” and ll in all the information.



3. Download all useful materials

All your registered devices under your account will show on the page. Each

product will be listed along with all its available les such as drivers, rmware,

user manual in different languages and bundled software etc. for download.

Please make sure you have download the necessary les such as driver before

you begin device installation.

Features

●24-Bit 192KHz 2 mic-In/2 inst-In, 2-Out USB Recording Interface

●Hi-end studio grade DAC/ADC provides super high dynamic range

DAC: Dynamic Range: 127dB

●Supporting Mac/PC connectivity simultaneously with SmartDevice

●Live session possible with audio signal processing via ProDriver4 virtual plug-in rack

●4x4 analog I/O full duplex simultaneous recording and playback

●Compatible with iOS and Android Digital I/O jack (Type C) & Analog I/O jack (3.5mm

stereo TRRS) for direct connection with SmartPhone, tablet or other device

●Mic/Instrument preamps with individual gain control and phantom power switch

●2 analog outputs on 1/4” TRS jacks

●Monitor volume control knob on the top panel

●Direct monitor button control on the top panel

●1 headphone output with assignable source and individual volume control

●Flexible channel routing via the ProDriver4 software software control panel

●ICON ProAudio developed ultra low latency ProDriver4™driver is provided

●ICON ProAudio innovative and user friendly plug-in hosting rack software is built-in

with ProDriver4™(Windows and Mac)

●ARM-M7/500MHz processing power and technology for super fast and stable signal

processing

●USB2.0 High Speed equipped and USB bus-powered

●2xType C “OTG” ports for direct connection with 2 mobile devices

●Supports DirectSound, WDM and ASIO2.0

The ICON ProAudio MobileU Dyna USB recording interface provides an audio input

and output module as well as analog & digital connectivity with any Smart mobile

device for live streaming applications. Main features include:

●LoopBack function is equipped with ProDriver 4™ for both Mac and Windows

platforms

●Compatible with Mac OS (M1/ Intel-Mac) 10.11 and later, iOS 9 or above, Andriod

and Windows 7, 8 & 10 (32-bit/64-bit)

●+5VDC power supply connector is equipped for external power supply when using

with iOS

●Rugged aluminum construction

●Bitwig 8Track included

●Dotec audio plugins included

Front Panel

1. “Mic/Inst” Inputs 1/2

Unbalanced instrument and mic level inputs. These hybrid connectors will accept

a standard 3-pin XLR plug or a 1/4” TS connector.

2. 48V phantom power switch

Press to supply +48V phantom power to the associated XLR input. This phantom

power circuit is suitable for most condenser microphones.

3. Input gain level controls 1/2

These potentiometers control the input level of their associated analog Mic/Inst

input.

4. Master level control

This potentiometer controls the master output level of the analog outputs.

5. Headphone level control

This potentiometer controls the output level of the headphone output.

6. Headphone output

This output jack accepts a standard 1/4″ stereo TRS headphone connector.

7. Hardware / PC Monitoring Control (Direct Monitor)

Hardware direct monitoring ( Clockwise - "Direct Out" ) eliminates the latency or

delay inherent in even the best internal circuitry while listening to your input and

existing tracks. You can also listen to your input complete with effects (Counter-

Clockwise - "PC") while recording by using extremely the low-latency ASIO

monitoring.

1 2

4 5 7

Rear Panel

1. USB 2.0 connector (Type C)

Connect it with the provided USB cable Type C to your Mac/PC/iOS device

camera kit’s USB connector. Your Mac/PC must have a USB2.0 connector in

order to run the full speed of MobileU Dyna.

2. Line outputs 1/2

These are unbalanced analog outputs on standard 1/4″ TS connectors at +6dBU

line level.

3. Smart Device I/O (Digital - Type C & Analog - 3.5mm TRRS)

These ports allow you to connect your smart device and your Mac/PC

simultaneously so you may process the audio signal with your Mac/PC before

delivering signal to the smart device for live streaming application.

Digital - Type C jack for connecting directly to the digital jack of the smart

device (OTG adapter raquired)

Analog - TRRS stereo jack for connecting directly to smart device’s audio I/O

4. MIDI I/O connectors

MIDI input and output on standard 5-pin DIN connectors.

5. Power supply connector (USB Type C)

MobileU Dyna is USB-bus powered. If your computer does not supply sufcient

power, connect an ICON 5VDC power supply adapter to this jack. Or you may

try to use your smart phone power adapter with the correct cable type (USB

Type C). Normally it should work and provide enough power to the device.

(Note: You can get the power adapter from ICON distributors/dealers near you)

(Note: External power adapter is needed if the MobileU Dyna is use as a

standalone unit without a Mac or PC)

Mac driver installation

MobileU Dyna is a class compliant device. Thus there is no driver installation

needed for Mac. Also, it fully supports iOS devices by connecting the unit to a

camera kit.

Install ProDriver 4 with LoopBack function

1. Download ProDriver 4 (Mac) from your "Personal User

Portal" page for your audio intetface.

(Please refer to P.5 "register your ICON ProAudio product to your personal

account" for creating your persoanl user portal)

2. Double click the le "ProDriver-OSX-xxx.dmg" that you just

downloaded from your Persoanl User Portal



3. Double click "ProDriver.pkg" to start the ProDriver installation



Diagram 1

Diagram 2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ICON Aufnahmegeräte Handbücher

ICON

ICON QCon Pro Xs Bedienungsanleitung

ICON

ICON CUBE 4 Nano Bedienungsanleitung

ICON

ICON PLATFORM-M Bedienungsanleitung

ICON

ICON iConPad Bedienungsanleitung

ICON

ICON SHIELD Bedienungsanleitung

ICON

ICON UMIX1010 RACK Bedienungsanleitung

ICON

ICON Upod Live Bedienungsanleitung

ICON

ICON MicU Bedienungsanleitung

ICON

ICON iControls Bedienungsanleitung

ICON

ICON PLATFORM NANO Bedienungsanleitung

ICON

ICON Umix 1008 Satellite Bedienungsanleitung

ICON

ICON QCon Pro G2 Bedienungsanleitung

ICON

ICON ProAudio PlatformNano Air Bedienungsanleitung

ICON

ICON U-Solo Bedienungsanleitung

ICON

ICON U-Solo Live Bedienungsanleitung

ICON

ICON PlatformNano Bedienungsanleitung

ICON

ICON Pro Audio UPorts2 Dyna Bedienungsanleitung

ICON

ICON i-Controls Pro Bedienungsanleitung

ICON

ICON iKeyboard 4X Bedienungsanleitung

ICON

ICON Platform M+ Bedienungsanleitung

ICON

ICON PLATFORM M Plus Bedienungsanleitung

ICON

ICON QconProX Kurzanleitung

ICON

ICON QConEX Bedienungsanleitung

ICON

ICON Satellite UMIX1008 Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch