ICON ITSTC56 Series Montageanleitung
SAFETY
Page 1
TOOL STORAGE SAFETY
For technical questions, please call 1-888-866-5797. (2022 version)
IMPORTANT SAFETY
INSTRUCTIONS
When using your garage equipment,
basic safety precautions should always be
followed, including the following:
1. To prevent serious injury and DEATH from tipping,
Do not have more than one drawer open at a time.
2. DO NOT SIT, STAND OR CLIMB ON THIS ITEM.
DO NOT STEP IN OR ON DRAWERS.
3. Unplug roll cab before drilling mounting
holes to mount workcenter hutch.
4. Do not allow children to play with or near this
item. This item is NOT children’s furniture.
5. Do not exceed weight capacity. Do not exceed
drawer weight capacity, based on connected pair
of slides. Evenly distribute load from bottom up.
Uneven loading causes tipping. Be aware of
dynamic loading! Sudden load movement may
briefly create excess load causing tipping.
6. Close and lock drawer(s) before moving.
Do not pull, push to move.
7. Center an overhead or chest securely
within lip on top of chest or cabinet.
8. Place an overhead or chest on top of
matching chest or cabinet only.
Page 2
TOOL STORAGE SAFETY
For technical questions, please call 1-888-866-5797. (2022 version)
9. Do not place objects on top of an
overhead or hang objects off side.
10. Have assistant help place an overhead or
chest on top of chest or cabinet.
11. Use only on a flat, level, hard and smooth surface
capable of safely supporting a fully loaded Chest.
Use care when rolling unit over concrete seams.
12. Do not lift while loaded.
13. Do not use as a stand-alone unit.
14. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
15. Read instruction manual before assembly and/or use.
16. Assemble only according to these instructions.
Improper assembly can create hazards.
17. Do not operate equipment with a damaged cord or if
the equipment has been dropped or damaged – until
it has been examined by a qualified service person.
18. Do not let a cord hang over the edge of the
table, bench, or counter or come in contact
with hot manifolds or moving fan blades.
19. If an extension cord is necessary, a cord with a current
rating equal to or more than that of the equipment should
be used. Cords rated for less current than the equipment
may overheat. Care should be taken to arrange the
cord so that it will not be tripped over or pulled.
Page 3
TOOL STORAGE SAFETY
For technical questions, please call 1-888-866-5797. (2022 version)
20. Always unplug equipment from electrical outlet when
not in use. Never use the cord to pull the plug from
the outlet. Grasp plug and pull to disconnect.
21. Loop cord loosely around equipment when storing.
22. To reduce the risk of electric shock or fire,
never overload receptacles. Refer to markings
for the proper load on receptacles.
23. To reduce the risk of electric shock, do not
use on wet surfaces or expose to rain.
24. To reduce the risk of fire, do not operate equipment in the
vicinity of open containers of flammable liquids (gasoline).
25. Adequate ventilation should be provided when
working on operating internal combustion engines.
26. Keep hair, loose clothing, fingers, and all
parts of body away from moving parts.
27. Weight capacity and other product capabilities apply
to properly and completely assembled product only.
28. Use only as described in this manual. Use only
manufacturer’s recommended attachments.
29. Keep assembly area clean and well lit.
30. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.
31. Keep bystanders out of the area during assembly.
Page 4
TOOL STORAGE SAFETY
For technical questions, please call 1-888-866-5797. (2022 version)
32. To reduce the risk of injury, close supervision is necessary
when this product will be used around children.
33. Use as intended only.
34. Inspect before every use;
do not use if parts are loose or damaged.
35. Maintain product labels and nameplates. These carry
important safety information. If unreadable or missing,
contact Harbor Freight Tools for a replacement.
SAVE THESE
INSTRUCTIONS.
Visit our website at: http://www.harborfreight.com
TM
56" TOP CHEST
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 22i
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright©2022 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using
this product.
Failure to do so can result in
serious injury.
SAVE THIS MANUAL.
Page 1
56" TOP CHEST
For technical questions, please call 1-888-866-5797.
Specifications
Drawer Weight Capacity
(Evenly distributed
from bottom up.)
265 lb per connected
pair of slides
Model Color Item
ITSTC56R Red 56135
ITSTC56BLU Blue 56280
ITSTC56BLK Black 56281
ITSTC56GN Green 56282
Page 2
56" TOP CHEST
For technical questions, please call 1-888-866-5797.
Dieses Handbuch passt für folgende Modelle
8
Inhaltsverzeichnis
Andere ICON Werkzeugaufbewahrung Handbücher
Beliebte Werkzeugaufbewahrung Handbücher anderer Marken
Ryobi
Ryobi RWB03 Bedienungsanleitung
Husky
Husky H27CH5TR4BGK Bedienungsanleitung
Scheppach
Scheppach ts 2100 Bedienungsanleitung
Cornwell Tools
Cornwell Tools CTB360AKBK Bedienungsanleitung
DIVERSIFIED WOODCRAFTS
DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Bedienungsanleitung
Cassese
Cassese CS200 CART Bedienungsanleitung
