ICP DAS USA IWSN-200E Bedienungsanleitung

iWSN-200E Quick Start

v1.2, February 2022

Packing List

In addition to this guide, the package includes the following items:

iWSN-200E

(included antenna)

Screw Driver

Technical Support

service@icpdas.com

www.icpdas.com

Resources

How to search for drivers, manuals and spec

information on ICP DAS website.

For Mobile Web

For Desktop Web

1. Appearance

Model Name

1. Appearance

Number

Instructions

LED indicators

Antenna connector

(type RP-SMA)

Rotary switch of

Communication

parameter setting

Terminal and

Ethernet port

DIP switch of

operation mode

2. Pin Assignments

Number

Name

Instructions

RJ-45

interface

Ethernet port

and supply

PoE power

+Vs

+10V~+30VDC

GND

Ground

F.G.

Shield ground

Switch

Instructions

Init

Initial mode

Run

Run mode

3. Communication Parameter

Rotary

switch

Instructions

Channel

0 ~ F = ch 0 ~ ch F

Group

0 ~ 7 = GID 0 ~ GID 7

8 ~ F = Reserved, fix GID 0

4. LED Indicators

The module provides three LED indicators, including power, wireless

transmission and wireless reception status. The table below will show

the LED status indicator.

Indicator

Color

Status

Instructions

Power

status

PWR

Red

Power on

OFF

Power off

Wireless

transmission

status

RF_Tx

Green

Flashing

Wireless data has

been transmitted

OFF

No data be

transmitted

Wireless

reception

status

RF_Rx

Yellow

Flashing

Wireless data has

been received

OFF

No data be received

In addition, the LED indicators of RJ-45 interface in Ethernet as

below table:

Indicator

Color

Status

Instructions

Link/Act

Green

Flashing

Communicating.

10/100M

Yellow

100 Mbps.

OFF

10 Mbps or Ethernet disconnected.

5. Connecting power and computer to module

A. Confirm the Ethernet setting of your computer is correct and be

worked. Confirm both firewalls of Windows and antivirus software

has closed or correct setting in your computer to avoid “Search

Server”function in chapter 6 can’t search to iWSN-200E. (Please

conform to your administrator)

B. Connecting iWSN-200E and computer to same Hub/Switch or

same sub network, and confirm the Init/Run switch of module to

Run position, and then adjust rotary switch to let RF channel and

Group ID same with iWSN sensors.

C. Supplying power (+10~+30VDC) or powered by PoE to iWSN-

200E.

Power supply

(+10~+30VDC)

iWSN-200E

Ethernet

Hub/Switch

Computer

Ethernet

iWSN-200E

Ethernet

PoE

Hub/Switch

Computer

Ethernet

None PoE

Have PoE

6. Configuring the correct network parameter

There are two methods to configure network parameter, the user

can use eSearch Utility or browser to configure as below.

一、Using eSearch Utility software：

A. Installing eSearch Utility, the user can download from ICP DAS

website as below link:

http://www.icpdas.com/en/download/index.php?nation=US&kind1

=&model=&kw=esearch

B. Double click the eSearch Utility shortcut icon in desktop.

C. Click “Search Server” button to search your iWSN-200E.

D. Double click your iWSN-200E to open “Configure Server (UDP)”

configuration dialog.

The factory default values of iWSN-200E as below table:

IP Address

192.168.255.1

Sub-net Mask

255.255.0.0

Gateway

192.168.0.1

E. Key in the network configuration (IP/Mask/Gateway), and then

click “OK” button.

Note: iWSN-200E will use new setting after 2 seconds.

F. After 2 seconds, click “Search Server”to search iWSN-200E, and

confirm the network configuration of previous step whether be

correct set.

二、Using browser

Note: If your using browser is Internet Explorer, in order to

ensure the web server of iWSN-200E can display properly,

please be sure to close the IE cache first, the step as below:

(If your using browser isn’t Internet Explorer, please skip these

steps.)

Step1：In the IE browser menu, click ”Tools (T)” “Internet

Options (O)”.

Step2：After entry the option box, click “General” tab, and then

click ”Settings (S)” button in the browsing history record to

entry network data setting box.

Step3：In the “Temporary Internet Files” label, click “Every

visit to the page (E)”, and then click “OK” button to finish

setting.

A. After key in password in Login password field, click “Submit”

button.

B. After click “Network” item, the web will display IP Address

Selection page. Key in network configurations (IP/Mask/Gateway),

and click “Update Setting” button.

C. After click “Port1” item, the web will display Setting page. Key in

Port number, and click “Submit” button.

Default password：

admin

7. Self-Test

A. The eSearch Utility in chapter 6 have supply a test software, the

user can click “Tools” ”Modbus TCP Master” to open Modbus

TCP Master Utility.

B. Key in the IP address of iWSN-200E in Modbus TCP Master, and

then click ”Connect” button to connect iWSN-200E.

C. Key in Modbus command such as: 1 2 0 0 0 6 1 4 0 1 0 1 in

command field, and then click “Send command” button.

D. If the response messages such as 01 04 02 00 03 is correct, and

the 00 03 (0x0003, Hex) is the module code of iWSN-200E that

mean test successfully.

Inhaltsverzeichnis

Andere ICP DAS USA Netzwerk-Hardware Handbücher

ICP DAS USA

ICP DAS USA I-7532 Bedienungsanleitung

ICP DAS USA

ICP DAS USA ZT-2005-C8 Bedienungsanleitung

ICP DAS USA

ICP DAS USA I-7000 Series Bedienungsanleitung

ICP DAS USA

ICP DAS USA I-7532M-FD Bedienungsanleitung

ICP DAS USA

ICP DAS USA I-7532RM-FD Bedienungsanleitung

ICP DAS USA

ICP DAS USA PDS-734D Bedienungsanleitung

ICP DAS USA

ICP DAS USA ZT-2510 Series Bedienungsanleitung

ICP DAS USA

ICP DAS USA PMC-5151 Bedienungsanleitung

ICP DAS USA

ICP DAS USA I-7532RM-FD Betriebsanleitung

ICP DAS USA

ICP DAS USA UA-2200 Series Bedienungsanleitung

ICP DAS USA

ICP DAS USA I-2533 Bedienungsanleitung

ICP DAS USA

ICP DAS USA ET-2200 Series Bedienungsanleitung

ICP DAS USA

ICP DAS USA DB-16R Bedienungsanleitung

ICP DAS USA

ICP DAS USA I-7532M-FD Bedienungsanleitung

ICP DAS USA

ICP DAS USA DB-24PR/24 Bedienungsanleitung

ICP DAS USA

ICP DAS USA GRP-2841M Bedienungsanleitung

ICP DAS USA

ICP DAS USA PDS-734 Bedienungsanleitung

ICP DAS USA

ICP DAS USA PMC-5231 Bedienungsanleitung

ICP DAS USA

ICP DAS USA ZT-20 IOG Series Bedienungsanleitung

ICP DAS USA

ICP DAS USA I-2533CS-FD Bedienungsanleitung

ICP DAS USA

ICP DAS USA Compact PAC i-8000 Series Bedienungsanleitung

ICP DAS USA

ICP DAS USA PMC-5141 Bedienungsanleitung

ICP DAS USA

ICP DAS USA ET-2255 Bedienungsanleitung

ICP DAS USA

ICP DAS USA Network Device I-7011 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung

ICP DAS USA iWSN-200E Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken