ICP DAS USA iCAM-771 Bedienungsanleitung
P.1
Packing List
iCAM-771 package includes the following items:
iCAM-771
L Style Bracket
Screw Pack
Alignment Sticker
Waterproof Head x 2
(1 is on I/O Port)
Software CD
x 1
Quick Start
(This Document)
Technical Resources
How to search for drivers, manuals and spec information on ICP DAS website.
For Mobile Web
For Desktop Web
iCAM-771 Quick Start
v1.1, 05/2020
P.2
1 Physical Connection
1) Be sure that your PC or laptop has connected to your local
Ethernet network.
2) Be sure that IP Camera has connected to your local networking
via the LAN port (RJ45) on the cable. For this PoE model, user can
use PoE Switch as power supply.
3) Use CAM FINDER software utility in CD to set up the camera (see
the next page), or directly set up the camera via the Micro IE
browser using the following default IP information:
IP: 192.168.255.2
Submask: 255.255.0.0
Gateway address: 192.168.0.1
DNS Server address: 8.8.8.8
Default
Username: admin
Password: admin
iCAM-771
PC/Notebook
①
②
PoE Switch
RJ45
P.3
2 CAM FINDER Installation
CAM FINDER software utility installation is required for finding out
your camera on local network that you can launch camera web
pages via Internet Browser or do some basically setting directly
without camera web pages.
CAM FINDER utility programs are located in the Software iCAM CD
provided together with the device. Please insert the CD into the PC
CD-ROM Drive, open the folder “Software_Utility” and then “CAM
FINDER”. Launch the CAM FINDER setup file “setup.exe”and
complete the installation step by step.
iCAM CD Path: \Software_Utility\Cam Finder\
The latest version of the CAM FINDER software program is available
on the iCAM product website, please see the page 1 of this Quick
Start.
Once CAM FINDER has been successfully installed
on the PC, double click the icon on the Desktop of
PC to run the software.
P.4
3 Network Configuration
Using CAM FINDER to Assign an IP Address
1) Click the [Device Search] on the top of Window to search the
camera on the network.
2) From the list, select the device with the MAC Address that
corresponds to the Camera that is to be configured.
3) Double click the
item or click right
key of mouse to the
selected item and
select the [Single
Device Setting].
1
3
2
P.5
4) Modify the relative network settings of Static IP Address. Click [Set]
button to save and enable the configuration modifications.
Open the Web-based UI of the selected camera
1) To access the Web-based UI of the selected unit,
run the [Open Web] on the select item.
4.1
4.2
P.6
2) For first time user, there will be a prompt to install the NETCAM
VIEWER PLUG-IN. Click the hyper-link directly to download. Before
completing the installation, you should close the browser first for
PLUG-IN component installation. After installation completed,
re-launch the
browser.
3) If the device has been configured correctly, the default Web
browser will open to the home page of the selected device.
* Username and password is required. (Default is admin / admin)
P.7
4 Camera and its Bracket Installation
1) Extract the round mounting plate from the camera enclosure by
pressing then
turning it
counterclockwise.
2) Attach the provided alignment sticker to the ceiling / wall where
the camera is going to be
installed.
3) Drill the screw holes
by either A or B to screw the mounting plate on the wall.
A.round mounting plate or
B.the Z-brackets
P.8
4) Drill a hole as indicate on the sticker. Gently
get the cable to go through the hole
before installing the
camera.
5) Attach the camera by matching the
alignment marks to the unlock points
and edge line on the sticker.
Twist the camera clockwise,
then 2 alignment marks
should be shifted to
the lock points.
After that, the
camera will be
securely fastened.
6) Installation completed.
Andere Handbücher für iCAM-771
1
Inhaltsverzeichnis
Andere ICP DAS USA Sicherheitskamera Handbücher
ICP DAS USA
ICP DAS USA iCAM-721F Bedienungsanleitung
ICP DAS USA
ICP DAS USA iCAM-771 Bedienungsanleitung
ICP DAS USA
ICP DAS USA iCAM-ZMR8422X Bedienungsanleitung
ICP DAS USA
ICP DAS USA iCAM-MR6322 Bedienungsanleitung
ICP DAS USA
ICP DAS USA iCAM-MR Bedienungsanleitung
ICP DAS USA
ICP DAS USA iCAM-721F Bedienungsanleitung
ICP DAS USA
ICP DAS USA iCAM-760D Bedienungsanleitung
