Icron EL5100 Bedienungsanleitung

KVM - DVI, USB 2.0,

Cat 5 Extender

330 feet (100 meters)

EL5100 User Guide

Thank you for purchasing the KVM - DVI, USB 2.0, Cat 5 Extender

330 feet (100 meters)

Please read this guide thoroughly.

FCC Radio Frequency Interference Statement Warning

This device complies with FCC Part 15 Subpart B.

CE Statement

The product meets European Standard EMC EN 55022 Class A, EN 61000, and EN 55024.

IC Statement

This Class A digital apparatus complies with Canadian ICES-003

Information contained herein is subject to change without notice. Document #90-00900-A02

Contents

Introduction...................................................................................................................... 4

Product Contents...........................................................................................................................................................................4

Requirements..................................................................................................................................................................................4

About KVM Extender....................................................................................................................................................................4

Compatibility and Recommended Setup ............................................................................................................................5

Local Extender Description and Markings ...........................................................................................................................6

Remote Extender Description and Markings......................................................................................................................7

Installation Guide ............................................................................................................. 8

Installing the Local Extender Unit............................................................................................................................................8

Installing the Remote Extender Unit......................................................................................................................................8

Connecting the Local Extender to the Remote Extender...............................................................................................9

Checking Installation ...................................................................................................................................................................9

Connecting a USB device .........................................................................................................................................................10

Troubleshooting ............................................................................................................. 10

Speciﬁcations.................................................................................................................. 13

Contacting Technical Support ....................................................................................... 14

Warranty Information .................................................................................................... 14

Technical Glossary .........................................................................................................15

Introduction

The instructions in this guide assume a general knowledge of computer installation procedures, familiarity

with cabling requirements, and some understanding of USB devices.

NOTE provide additional information that could be useful.

CAUTIONS provide important information about an operational requirement.

Product Contents

Packaged with:

• Local Extender

• Remote Extender

• 5V DC power adapter (2)

• USB Cable (6 ft)

• DVI Cable (5 ft)

• Quick Start Guide and Warranty Information

The product is a unique extender product and requires two power adapters, one for the local extender and one for

the remote extender.

Requirements

To complete the installation, you will also require the following items that are not included with the product:

• A computer with a DVI-D/DVI-I output

• USB 1.1 or 2.0 compatible computer (host computer) with a USB compliant Operating System

• USB 1.1 or 2.0 compatible device(s)

• Cat 5 Unshielded Twisted Pair (UTP) cable with two RJ45 connectors (if using surface cabling), OR,

Cat 5 cabling with two information outlets and two Cat 5 patch cords with RJ45 connectors (if using

premise cabling)

All references to Cat 5 cable in this document refer to solid core and represent the minimum

requirements. Solid core category 6 STP cable is recommended for best performance.

About the EL5100 | KVM - DVI, USB 2.0, Cat 5 Extender

The product incorporates ExtremeLinkTM technology, enabling users to extend their video and USB up to 330

feet or 100 meters.The product is designed as a remote desktop or KVM (keyboard, video, mouse) extender.

note

Compatibility and Recommended Setup

The product is compatible with many graphics cards, Operating Systems, and monitors supporting up to a

1920 x 1200 resolution. However, there is no guarantee that all devices are compatible with the product as

there are a number of different factors that may impact the operation of the KVM Extender.

The product complies with USB 1.1 and USB 2.0 speciﬁcations governing the design of USB devices. However,

the product supports USB 1.1 and low bandwidth USB 2.0 devices.These devices include: keyboards, mice,

ﬂash drives, microphones, speakers, printers, and USB 1.1 web cameras. Please contact Technical Support to

determine if your USB 2.0 device(s) can be supported.

DVI Cables

Ensure DVI cables used with the extender have connection between each connector’s shield. If not, it is

possible the extender can be damaged.

Cabling

Solid core category 6 STP cable is recommended for best performance and extension distance may be

reduced if not using category 6 STP cable. Cables must be terminated with category 6 connectors to

qualify as category 6.

Cable Type Installation Type Maximum Distance

Solid Core Cat 5e Uncoiled 330 ft (100m)

Solid Core Cat 5e UTP Coiled 229 ft (70m)

Solid Core Cat 5e STP Uncoiled 330 ft (100m)

Solid Core Cat 5e STP Coiled 262 ft (80m)

Solid Core Cat 6 UTP Uncoiled 330 ft (100m)

Solid Core Cat 6 UTP Coiled 330 ft (100m)

Solid Core Cat 6 STP Uncoiled 330 ft (100m)

Solid Core Cat 6 STP Coiled 330 ft (100m)

Host Operating Systems

• Windows7(32bit&64bit) • WindowsXP(32bit&64bit)

• WindowsVista(32bit&64bit) • Linux

• MacOSX

Peripherals

• Keyboard • Mice

• MassStorageDevices • Speakers

• USB1.1WebCameras • Microphones

note

Local Extender Description and Markings

The Local Extender connects to the computer using the supplied DVI and USB cable.

ITEM TYPE DESCRIPTION

1 Power LED (Green) LED green indicates the system is ready. O indicates there is no power

applied to the unit.

2 Link LED (Green) LED green indicates a valid link is established between the Local and

Remote Extender. O indicates there is no link.

3 USB LED (Green)

LED green indicates the system is properly enumerated on the host

computer. Blinking green indicates the host is in suspend mode. No green

light (off) indicates the system is not enumerated.

4 Video LED (Green)

Blinking LED green indicates normal video activity. Solid Green light

indicates HDCP video activity. No green light (O) indicates no

video activity.

5 Config Reserved for company use only.

6 Link Port (RJ45) Accepts RJ45 connector for Cat 5 cabling (or better).

7 DVI-D In Accepts DVI-D connector for video input from the host computer.

8 Device Port (USB Type B) Used to connect the Local Extender unit to the host computer.

9 Power Port Connects to the 5V, 3A power adapter.

Power

Link

USB

Video

1234

EXTREME

Front View

6789

DVI-D In 5V DCLink

Config

Rear View

Remote Extender Description and Markings

The Remote Extender provides DVI output to a monitor and three USB Type A ports for standard USB

devices. Additional devices may be connected by attaching USB hubs.

ITEM TYPE DESCRIPTION

1 Power LED (Green) LED green indicates the system is ready. Off when no power is applied to

the unit.

2 Link LED (Green) LED green indicates a valid link is established between the Local and

Remote Extender. Off indicates there is no link.

3 USB LED (Green) LED green indicates the system is properly enumerated on the host

computer. Blinking Green indicates the host is in suspend mode. No green

light (O) indicates the system is not enumerated.

4 Video LED (Green) Blinking LED green indicates normal video activity. Solid green light

indicates HDCP video activity. No green light (O) indicates no video

activity.

5 Conﬁg Reserved for company use only.

6 Link Port (RJ45) Accepts RJ45 connector for Cat 5 cabling (or better).

7 DVI-D Out Accepts DVI-D connector to the remote monitor.

8 Device Port (USB Type A) Accepts USB device(s).

9 Power Port Connects to the 5V, 3A power adapter.

Rear View

8 8 8

DVI-D Out 5V DCLink

Config

Power

Link

USB

Video

1234

EXTREME

Front View

Installation Guide

Before you can install the product, you need to prepare your site:

1. Determine where the computer is to be located and set up the computer.

2. Determine where you want to locate the remote desktop including the monitor, keyboard, mouse

and any other USB device(s).

3. If you are using surface cabling, the product supports a maximum distance of 100m.

If you are using premise cabling, ensure Cat 5 cabling is installed between the two locations,with

Cat 5 information outlets located near both the computer and the USB device(s), and the total length,

including patch cords is no more than 100m.

Installing the Local Extender Unit

1. Place the Local Extender unit near the computer.

2. Install the supplied USB cable to Local Extender (Type B Port), and an available USB 2.0/1.1 Type A Port

on the computer.

3. Install the supplied DVI cable to the Local Extender (DVI-D In), and an available DVI Port on the

computer.

Installing the Remote Extender Unit

1. Place the Remote Extender unit near the monitor and USB device(s) in the desired remote location.

2. Connect the Remote Extender DVI-D Out to the monitor with a DVI cable.

3. Plug in your USB Device(s).

Up to 330ft

(100m) over Cat 5

Connecting the Local Extender to the Remote Extender

To ensure proper operation, it is recommended that solid core Cat 6 STP cabling be used to connect the Local Extender

unit to the Remote Extender unit.The cabling must have a straight-through conductor conﬁguration with no crossovers

and must be terminated with Cat 6 connectors to qualify as Cat 6.

With Surface Cabling

1. Plug one end of the Cat 5 cabling (not included) into the Link port (RJ45) on the Local Extender unit.

2. Plug the other end of the Cat 5 cabling into the Link port (RJ45) on the Remote Extender unit.

With Premise Cabling

1. Plug one end of a Cat 5 patch cord (not included) into the Link port (RJ45) on the Local Extender unit.

2. Plug the other end of the patch cord into the Cat 5 information outlet near the host computer.

3. Plug one end of the second Cat 5 patch cord (not included) into the Link port (RJ45) on the Remote

Extender unit.

4. Plug the other end of the second patch cord into the Cat 5 information outlet near the USB device.

Connecting Power to the Local Extender and Remote Extender

1. Plug the 5V, 3A power adapter into a suitable AC outlet near the Local Extender.

2. Connect the power adapter to the Local Extender.

3. Plug the 5V, 3A power adapter into a suitable AC outlet near the Remote Extender.

4. Connect the power adapter to the Remote Extender.

Use only the power adapters supplied with the product. Use of substitute adapters may cause permanent damage to

the system and will void the warranty.

Checking the Installation

1. On the Local Extender and Remote Extender units, check that the Power, Link, USB, and Video LEDs

are on. If the Link LED is off, then the cabling between the Local Extender and Remote Extender unit is

not installed properly or is defective.

2. Check to see if the USB LED is on and the Video LED is blinking or on, if they are not this indicates there

is no USB data or Video data. Check the DVI and USB connections to the host computer, and the DVI

connection to the monitor. Check to see if any USB devices are connected to the Remote Extender.

note

3. If the product is not displaying video or your USB device fails to be detected by your Operating

System, please consult the Troubleshooting Guide.

ToopenSystemProlerinOSX:OpenFinder,selectApplications,thenopentheUtilitiesfolderanddouble

click on the System Proﬁler icon.

 ToopenDeviceManagerinWindows2000orXP:

Right click “My Computer” then select: Properties >> Hardware tab >> Device Manager

To open Device Manager in Windows Vista or Windows 7:

Open the Start menu, right click on“Computer”then select: Manage >> Device Manager

Connecting a USB Device

1. Install any software required to operate the USB device(s). Refer to the documentation for the USB

device(s), as required.

2. Connect the USB device to the device port on the Remote Extender unit.

3. Check that the device is detected and installed properly in the Operating System.

Troubleshooting

The following table provides troubleshooting tips.The topics are arranged in the order in which they should

be executed, in most situations. If you are unable to resolve the problem after following these instructions,

please contact Technical Support for further assistance.

PROBLEM CAUSE SOLUTION

All LEDs on

Local Extender

unit are off.

• The Local Extender unit is not

receiving power from the Local

Extender DC adapter.

1. Ensure that the DC power adapter is properly

connected to the Local Extender unit.

2. Check that the DC adapter is connected to a live

source of electrical power.

note

Andere Handbücher für EL5100

Inhaltsverzeichnis

Andere Icron Extender Handbücher

Icron

Icron USB 2.0 Ranger 2312 Bedienungsanleitung

Icron

Icron USB 2.0 Ranger 2304GE-LAN Bedienungsanleitung

Icron

Icron USB 2.0 RG2304 Bedienungs- und Wartungsanleitung

Icron

Icron Spectra 3022 Bedienungsanleitung

Icron

Icron USB 2.0 Ranger 2101 Bedienungsanleitung

Icron

Icron USB Rover 1300 Bedienungsanleitung

Icron

Icron USB 2.0 Ranger 2304 Bedienungsanleitung

Icron

Icron USB Rover 2850 Bedienungsanleitung

Icron

Icron Starling 3251C-10 Bedienungsanleitung

Icron

Icron USB 2.0 Ranger 2324 Bedienungsanleitung

Icron

Icron USB 3.0 Spectra 3022 Bedienungsanleitung

Icron

Icron USB Rover 200 Bedienungsanleitung

Icron

Icron USB 2.0 Ranger 2311 Bedienungsanleitung

Icron

Icron USB 3-2-1 Starling 3251C Bedienungsanleitung

Icron

Icron USB Ranger 110 Bedienungsanleitung

Icron

Icron EL3500 Bedienungsanleitung

Icron

Icron EL5363 Bedienungsanleitung

Icron

Icron EL5200 HDMI + USB 2.0 Extender Bedienungsanleitung

Icron

Icron USB 2.0 RG2304GE-LAN Bedienungsanleitung

Icron

Icron USB Ranger 2244 Bedienungsanleitung

Icron

Icron USB 2.0 RG2301 Bedienungsanleitung

Icron

Icron 422 Bedienungsanleitung

Icron

Icron USB Ranger 2201 Bedienungsanleitung

Icron

Icron Raven 3124 LEX Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung