ID-AL ChronoPlayer Bedienungsanleitung

ID-AL ChronoPlayer

Quick Start Guide V1.0

1 Introduction

1 Clickable knob controlling the user interface

2 LCD display for the user interface

SD memory card slot

4 Infrared sensor for remote control

5 Activity LED

6 Power supply input

7 USB host receptacle for USB flash drive

8 RS-2 2 serial link

9 Dry-contact inputs

10 Line-level stereo audio output

The ChronoPlayer makes it possible to play WAV or MP audio files stored locally (SD card or USB flash drive),

through programming (with the file organization or a Scheduler timetable), or interactively (with the input contacts or

the RS-2 2 serial link). The player is provided with a mains adapter and an infrared remote control.

This guide explains how to quickly start the player up for the first use. See the user guide, the software, the

examples, etc. on the support page of the ChronoPlayer on www.id-al.com.

2 Preparation of the Storage Device

Choose a quality SD / SDHC card or USB flash drive, and format it as

FAT 2. Store on it the configuration files and the audio contents

according to the organization demanded by the player, an example of

which is given opposite. Do not use special or accented characters.

•Files at the root of the storage device:

◦config.txt (optional): configuration file of the player. See

the chapter Configuration File.

◦serial.txt (optional): file defining the serial frames to

send. See the chapter RS-2 2 Serial Link.

◦.tm2 file (optional): timestamped programming file to

generate with our Scheduler software.

•Organization of the folders at the root:

◦No subfolders allowed.

◦Naming: xxx [TAG1][TAG2] Name

▪xxx: folder no. from 000 to 999 used by the commands.

The AutoPlay feature uses the 000 folder.

▪[TAGx] (optional): tags controlling the playback. See

the chapter Folder and File Tags.

▪Name (optional): folder name (free).

•Organization of the audio files in the folders:

◦Format: WAV or MP .

◦Naming: xxx [TAG1][TAG2] Name.ext

▪xxx: file no. from 001 to 999 defining the playback

order in sequential mode. Optional and unused in

random mode.

▪[TAGx] (optional): tags controlling the playback. See

the chapter Folder and File Tags.

▪Name (optional): filename (free).

▪ext: wav or mp3 extension.

ID-AL ChronoPlayer - Quick Start Guide V1.0

3 Connection of the Inputs

The 8 inputs are used to generate events. Triggering devices can be

connected to these inputs (e.g.: push-button, presence sensor, relay, PLC,

SensoPad). These devices must behave like open or closed contacts

between an input and the ground of the player, the activation being triggered

by a closed contact. The activation states (0 for open or 1 for closed) of all the

inputs are combined to form a binary code identifying the generated event:

xxx combination=Input1+Input2×2+Input3×4+Input4×8

+Input5×16+Input6×32+Input7×64+Input8×128

A command is assigned to each event. By default, the INPUTxxx event resulting from the xxx combination value

of the inputs is associated with the launch of the playback of the xxx folder. The config.txt file allows to change

the commands assigned to the 15 first combinations.

Up to 8 combinations (001, 002, 004, 008, 016, 0 2, 064, 128), the triggering devices can be directly connected to

the inputs. Beyond, a circuit based on diodes can be used:

Button Event

BP1 INPUT001

BP2 INPUT002

BP INPUT00

BP4 INPUT004

BP5 INPUT005

BP6 INPUT006

BP7 INPUT007

BP8 INPUT008

BP9 INPUT009

BP10 INPUT010

BP11 INPUT011

BP12 INPUT012

BP1 INPUT01

BP14 INPUT014

BP15 INPUT015

D1 to D28: 1N4148 diodes

15 push-buttons mapped to 4 inputs

4 irst Startup

1. Make sure that the player is off (mains adapter unplugged).

2. Connect the audio output (line level).

. Connect the inputs according to the needs. See the chapter Connection of the Inputs.

4. Connect the RS-2 2 serial link if needed.

5. Insert the prepared storage device. See the chapter Preparation of the Storage Device.

6. Turn the player on by plugging the mains adapter.

7. Follow the instructions of the user interface on the front panel in order to configure the time zone, the date, and

the time for the Scheduler feature. See the chapter User Interface.

8. The player is operational.

ID-AL ChronoPlayer - Quick Start Guide V1.0

5 User Interface

The user can interact with the player thanks to the LCD display and the olume/-Menu- clickable knob on the

front panel:

Player status:

•Rotation: volume control.

•Click: toggle PLAY/STOP.

•Long push (> s): setup menu.

Volume control:

•Rotation: volume control.

•Click: back to the status

display.

Setup menu: time zone, date,

and time:

•Rotation: selection.

•Click: validation.

6 Reference

6.1 older and ile Tags

Tag Folder File Parameter Description

Min Max Default

[Jxxx] ● ● 000 999 Jump to the xxx folder at the end of the playback.

[RET] ● Return to the previous folder at the end of the playback.

[RND]

[SEQ]

● [RND] Random or sequential folder playback mode.

[V+xx]

[V-xx]

● ● 00 64 00 Relative volume of the folder or of the file.

[NT] ● ● Block all the commands from the inputs, and the folder change commands from the RS-2 2

link and the Scheduler.

[RSxxx] ● ● 001 999 Send the #xxx RS-2 2 frame from the serial.txt file.

[WHL] ● Play the folder while the assigned input combination remains activated.

[NXTxxx] ● 001 999 Play the next xxx audio files each time the folder is played.

6.2 Configuration ile

The config.txt configuration file is a raw text file placed at the root of the storage device. Each line can define a

parameter of the player according to the following table:

Parameter Definition Valid Values Default Value Description

#ID:xxx 001 to 127 001 RS-2 2 ID of the player.

#VOLUME:xx 00 to 64 Last used value Volume of the player on startup.

#RS_MONITORING:x 0: no monitoring

1: “Daisy Chain” mode

2: “Monitoring” mode

: “Advanced Monitoring” mode

0 Monitoring mode of the RS-2 2 serial link.

#BOOT:xxx 000 to 999 000 Folder to play on startup.

#INPUTxx:cmd xx: 01 to 15

cmd: see the commands table

FOLDER0xx Commands assigned to the input contact

combinations.

#BUTTONx:cmd x: 1 or 2

cmd: see the commands table

BUTTON1:VOLUME_MINUS

BUTTON2:VOLUME_PLUS

Commands assigned to the special buttons of the

infrared remote control.

#BAUDRATE:xxxxx 9600, 19200, 8400 19200 Baud rate of the RS-2 2 serial port.

ID-AL ChronoPlayer - Quick Start Guide V1.0

Command Parameter Description

Min Max

PLAY Play the last played file.

STOP Stop the playback.

NEXT_TRACK Play the next file of the current folder.

PREV_TRACK Play the previous file of the current folder.

FOLDERxxx 000 999 Jump to the xxx folder.

VOLUME_PLUS Increase the volume by one step.

VOLUME_MINUS Decrease the volume by one step.

RSxxx 001 999 Send the #xxx RS-2 2 frame from the serial.txt file.

6.3 RS-232 Serial Link

This link allows the player to receive commands, to send arbitrary frames, and to send status information. By

default, it is configured as follows (can be changed with config.txt):

Baud Rate (bauds) Start Bit(s) Data Bit(s) Parity Bit(s) Stop Bit(s) Handshake

19200 1 8 0 1 None

The reception protocol is based on a -byte frame: “Status”, “Command”, and “Data”:

Status Description Command Description Data Description

80h All the players.

01h, 11h, 21h,

1h, 41h, 51h,

61h, and 71h

Jump to a folder in a bank of

128 folders.

command = bank × 10h + 1

00h to 7Fh Number of the folder in the bank.

81h to FFh

Only the player

with the ID from

001 to 127.

02h Playback control.

01h Play the last played file.

02h Stop the playback.

0 h Play the next file of the current folder.

04h Play the previous file of the current folder.

0 h Volume control. 00h to 40h Volume value.

Arbitrary frames can be sent with the [RSxxx] tag and the inputs. These frames must be defined in the

serial.txt file at the root of the storage device, as #xxx:tt tt tt…, with one definition per line, e.g.:

#002:98 75 21 35 45 B2

The monitoring protocol is structured like the reception protocol. The status byte has the same meaning. This

protocol sends the following command and data bytes, according to the mode selected by the config.txt file:

Mode Description Command Data Description

0No

monitoring The player only sends the frames from the serial.txt file.

1 Daisy Chain The player forwards everything it receives.

2 Monitoring 00h

00h Player ready. Sent at power-on.

Sent upon event.

0 h Start of playback.

04h End of playback.

Advanced

Monitoring 00h

00h Player ready. Sent at power-on.

0 h Start of playback.

04h End of playback.

01h Stopped. Sent every 250 ms, except if the player is unavailable

because of some issue.

02h Playing.

6.4 irmware Update

Start the player with a CHRONO.bin firmware file placed at the root of the storage device.

Andere Handbücher für ChronoPlayer

Andere ID-AL Drehscheibe Handbücher

ID-AL

ID-AL ChronoPlayer Bedienungsanleitung

Beliebte Drehscheibe Handbücher anderer Marken

Gemini

Gemini CDT-05 MKII Bedienungsanleitung

Rotel

Rotel RP-820 Bedienungsanleitung

Shuman

Shuman MC-250BT Bedienungsanleitung

Stanton

Stanton STR8-150 Bedienungsanleitung

Audio Technica

Audio Technica AT-LPW40WN Bedienungsanleitung

Crosley

Crosley McQueen CR7011-GY Bedienungsanleitung

Reloop

Reloop SMP-1 Bedienungsanleitung

auna

auna TT-Classic Plus Bedienungsanleitung

COMO AUDIO

COMO AUDIO Turntable Analog Bedienungsanleitung

Dual

Dual 1009 F Bedienungsanleitung

REED

REED Muse3C Bedienungsanleitung

AXIOMTEK

AXIOMTEK OPS883-H Series Bedienungsanleitung

Pioneer

Pioneer PL-71 Bedienungsanleitung

Vestax

Vestax PDX-a1 Bedienungsanleitung

Denon

Denon DP-400 Bedienungsanleitung

Dual

Dual 504 Bedienungsanleitung

Audio-Techica

Audio-Techica AT-LP60XBT Bedienungsanleitung

Goldring

Goldring G99 Bedienungsanleitung