idatastart HC3 Bedienungsanleitung
OWNER’S MANUAL
®
2016/06
hc3
2IDATASTART OWNER’S GUIDE
CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM
WELCOME TO IDATASTART
Congratulations on the purchase of your iDataStart HC3 remote start system. Please take a moment to
review the following table of contents to help you quickly access the information you need.
Remote overview 3
Remote functions & confirmations 4-6
Programming a new remote 6
Upgrading your FLEX remote configuration 7
Replacing remote batteries 7
Remote starting from your factory key fob 7
Adjusting engine runtime settings 8
Key takeover following remote start 8
When servicing your vehicle (Valet Mode) 9
Remote start troubleshooting 10
Vehicle shutdown troubleshooting 11
Limited lifetime warranty 12
FCC statement 13
SAR information statement 14-15
IC statement 15
Headquartered in Montreal, Canada, Automotive Data Solutions Inc. (ADS) is a privately held company specialized in the development and
marketing of remote start and audio integration solutions destined for the automotive aftermarket. ADS’ award-winning products (marketed
under the iDatalink®, iDatalink Maestro® and iDataStart® brands) are sold and installed through a network of Authorized Dealers across
North America, South America, Europe and Russia. For more information about ADS’ products and services, visit www.adsdata.ca.
IDATASTART OWNER’S GUIDE 3
CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM
Remote model TR3450AF
Buttons 5
FLEX configuration FLEX 1W FLEX 2W FLEX 2WX
Communication / Range 1-Way / Half-Mile* 2-Way / Half-Mile* 2-Way / 1-Mile*
Range upgrade options FLEX 2W or 2WX FLEX 2WX --
Transmit confirmation (TX) Red Top LED Orange Top LED Amber Top LED
Receive confirmation (RX) -- Amber Button LED
+ Chime
Amber Button LED
+ Chime
Batteries required 1 x CR2450
Avg. battery Life 15-20 months 10-15 months 8-15 months
Warranty 1 year
REMOTE OVERVIEW
Your iDataStart HC3 remotes can be programmed in one of three configurations listed below. Please take a
moment to familiarize yourself with their general features.
TOP LED (TX)
BUTTON LED (RX)
BUTTON
CASING
RELEASE
*Maximum range listed. May vary by location.
4IDATASTART OWNER’S GUIDE
CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM
REMOTE FUNCTIONS & CONFIRMATIONS
Thanks to their multiplexing technology, iDataStart HC3 remotes offer over 30 functions using only 5
buttons. In order to get the most out of your remotes, please take a moment to get acquainted with
the following functions:
NOTES:
1. Available functions must be enabled by an Authorized Dealer during installation to be functional on remote
2. Non-highlighted icons = Press & release button
3. Highlighted (grey) icons = Press & hold button for 2.5 seconds
4. Coma (,) between icons = Press buttons one after the other
5. Plus (+) between icons = Press buttons simultaneously
6. Timeout between each button press = 3 seconds
7. Function* = Available in 2nd Car Mode
8. Confirmations are only available with FLEX 2W and FLEX 2WX remote configurations.
BUTTONS FUNCTION CONFIRMATION 2WAY ONLY FUNCTION DESCRIPTION
Lock & Arm* 1 chime + 1 flash Secure your vehicle by locking the doors
and arming the alarm.
Unlock &
Disarm* 2 chimes + 2 flashes Access your vehicle by unlocking the doors
and disarming the alarm.
--
Query*
Panic* 1 chime + 1 flash Trigger the panic siren.
AUX 5* To be completed by Authorized Dealer if applicable
Trunk Release Release the trunk or hatch.
IDATASTART OWNER’S GUIDE 5
CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM
BUTTONS FUNCTION CONFIRMATION 2WAY ONLY FUNCTION DESCRIPTION
Engine Start/
Stop*
4 chimes + 4 flashes
(Button LEDs will also flash
intermittently while engine is
running)
Start and stops the engine.
,AUX 1 To be completed by Authorized Dealer if applicable
,AUX 2 To be completed by Authorized Dealer if applicable
,AUX 3 To be completed by Authorized Dealer if applicable
,AUX 4 To be completed by Authorized Dealer if applicable
, , *2nd Car Mode
Control two iDataStart-equipped vehicles
using one remote. Works with all functions
marked with an asterisk (*).
,Silent Lock* Disable the vehicle’s horn and alarm siren
when pressing the ‘Lock’ button.
,Silent Unlock* Disable the vehicle’s horn and alarm siren
when pressing the ‘Unlock’ button.
, + Valet Mode
ON/OFF
1 chime ON
2 chimes OFF
Turn off remote start and security
features when servicing your vehicle or
valet parking. Keyless entry features
remains functional.
, Runtime Extend Seamlessly extends your engine runtime
without restarting your vehicle.
, + Mute
ON/OFF
1 chime ON
2 chimes OFF
Disable the vehicle’s horn and alarm siren
even when alarm is triggered. Remote will
still receive alarm notification.
, + Shock Sensor
ON/OFF
1 chime ON
2 chimes OFF Disable shock sensors if installed.
6IDATASTART OWNER’S GUIDE
CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM
BUTTONS FUNCTION CONFIRMATION 2WAY ONLY FUNCTION DESCRIPTION
, + Ignition Lock
ON/OFF
1 chime ON
2 chimes OFF
Automatically locks doors when engine is
running.
, + Passive Lock &
Arm ON/OFF
1 chime ON
2 chimes OFF
Automatically locks & arms your vehicle 60
seconds after you unlock it.
, + Turbo
ON/OFF
1 chime ON
2 chimes OFF
Cool down your turbo before turning the
engine off. Programmable runtime from 1
to 4 minutes.
, + Weather Start
ON/OFF
1 chime ON
2 chimes OFF
Set your vehicle to automatically remote
start every 2, 3 or 4 hours (programmable)
or from a temp. sensor sold separately.
,,, Lock Remote 1 chime + 1 flash
Disable all functions on your remote.
Pressing a button will generate 6 chimes +
6 flashes. Available with 2-way remote only.
,,, Unlock Remote 2 chimes + 2 flashes Enable all functions on your remote.
Available with 2-way remote only.
,,, Mute Remote
ON/OFF
1 chime ON
2 chimes OFF
Disable the chime when pressing any but-
ton on your remote. Available with 2-way
remote only.
PROGRAMMING A NEW REMOTE
Are you replacing a lost or damaged remote or simply adding an extra remote to your iDataStart system?
Please take note of the following:
1. A functional
iDataStart HC3
system must already be installed in your vehicle.
2. All new remotes must be installed by an
iDataStart HC3
Authorized Dealer.
3. A maximum of 4 remotes can be programmed to your iDataStart system. Ask your
iDataStart HC3
Authorized Dealer for compatible remotes.
IDATASTART OWNER’S GUIDE 7
CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM
UPGRADING YOUR FLEX REMOTE CONFIGURATION
Want to upgrade the confguration of your iDataStart HC3 remotes? Please take note of the following:
1. A functional iDataStart HC3 system with FLEX 1W or FLEX 2W remote configuration must already be
installed in your vehicle.
2. All upgrades must be programmed by an iDataStart Authorized Dealer. Upgrade fees will apply.
REMOTE STARTING FROM FACTORY KEY FOB
Available on most vehicles, your iDataStart HC3 system can enable remote start functionality from your
factory key fob as follows:
BUTTON PRESS FUNCTION
3x rapidly Start engine
3x rapidly Stop engine
Remote start range will vary by key fob. Ask your
iDataStart HC3
Authorized Dealer for details.
Follow the steps below to replace the batteries in your iDataStart HC3 remotes OR scan the QR code
below to view a video tutorial.
1. Insert a 25 cent coin into the hollow (bottom left) corner of your iDataStart remote.
2. Gently twist the coin and move it along the seam until the casing pops open.
3. Use your coin to pry open the rest of the case perimeter.
4. Slide the old battery out of its enclosure and replace with the new battery.
5. Snap top and bottom casings back together using your hands.
REPLACING REMOTE BATTERIES
http://q-r.to/1h9x
8IDATASTART OWNER’S GUIDE
CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM
ADJUSTING ENGINE RUNTIME SETTINGS
Once remote started from your factory key fob or long-range remote, your vehicle will run for the
programmed ‘runtime’ setting. The default runtime is 15 minutes but it can also be programmed for
3, 5, 10, 25, 30 or 35 minutes. If you wish to change your remote start runtime setting, contact your
iDataStart Authorized Dealer.
KEY TAKEOVER FOLLOWING REMOTE START
Available on some vehicles, the ‘key takeover’ procedure ensures that your engine does not turn off
when entering the car during the remote start runtime, following a remote start command. Follow the
instructions below or scan the QR code to view a video tutorial.
For Standard Key Vehicles
1. Unlock and enter vehicle
2. Close doors
3. Insert key into ignition and turn ignition to ON position
4. Press foot brake
For Push-To-Start Vehicles
1. Unlock and enter vehicle with valid smartkey
2. Close doors
3. Press foot brake
NOTE: To prevent your vehicle from shutting down, complete the steps above within the programmed
delay time (45 seconds, 90 seconds, 3 minutes or 4 minutes). Key takeover procedure may vary by
vehicle, ask your
iDataStart HC3
Authorized Dealer for deatails.
http://q-r.to/2ixD
http://q-r.to/2iwz
IDATASTART OWNER’S GUIDE 9
CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM
WHEN SERVICING YOUR VEHICLE
To ensure safety during vehicle servicing, the remote starter must be placed in ‘Valet Mode’. The ‘Valet
Mode’ will disable remote start functionality. To activate or deactivate the ‘Valet Mode’, follow the
instructions below or scan the QR codes to view a video tutorial.
With Vehicle Key
FUNCTION ACTION # OF PARKING LIGHT FLASHES
Valet Mode ON
Cycle ignition OFF/ON 2x rapidly,
then press brake 3x.
1
Valet Mode OFF 2
With iDataStart Remote
FUNCTION ACTION # OF PARKING LIGHT FLASHES
Valet Mode ON Turn ignition ON, then press
,+
1
Valet Mode OFF 2
With iDataStart Antenna
FUNCTION ACTION # OF LED & PARKING LIGHT
FLASHES
Valet Mode ON
Turn ignition ON, then press
& hold button for 5 seconds
1
Valet Mode OFF 2
http://q-r.to/2aDQ
http://q-r.to/244h
http://q-r.to/1pmn
10 IDATASTART OWNER’S GUIDE
CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM
REMOTE START TROUBLESHOOTING
If your
iDataStart HC3
remote fails to start the vehicle, the parking lights* will flash three times
immediately, then flash a number of times according to the errors below:
# OF PARKING LIGHT
FLASHES DIAGNOSTIC SOLUTION
3 + 1 Engine is already running Turn engine OFF
3 + 2 Key in ignition at ON position Remove key from ignition
3 + 4 Trunk is open Close trunk
3 + 5 Foot brake is ON Release foot brake
3 + 6 Hood is open Close hood
3 + 8 Tach failure Contact Authorized Dealer
3 + 10 System is in Valet Mode Exit Valet Mode
3 + 11 CAN communication failure Contact Authorized Dealer
NOTE: Parking lights must be connected at installation to enable troubleshooting flashes. Ask your
Authorized Dealer for details.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere idatastart Fernstartsystem Handbücher
idatastart
idatastart TR1150A Bedienungsanleitung
idatastart
idatastart VWX000A Bedienungsanleitung
idatastart
idatastart TR2550A Bedienungsanleitung
idatastart
idatastart HC2352AC Bedienungsanleitung
idatastart
idatastart HC Bedienungsanleitung
idatastart
idatastart VW2410A Bedienungsanleitung
![idatastart OEM-IDS(RS)-BM1-[ADS-BM1]-EN Bedienungsanleitung](/data/manuals/21/6/2163b/sources/idatastart-oem-ids-rs-bm1-ads-bm1-en-manual.jpg "idatastart OEM-IDS(RS)-BM1-[ADS-BM1]-EN Bedienungsanleitung")
idatastart
idatastart OEM-IDS(RS)-BM1-[ADS-BM1]-EN Bedienungsanleitung
idatastart
idatastart HC2352AC Bedienungsanleitung
idatastart
idatastart BM1 Bedienungsanleitung
idatastart
idatastart CMVWXA0 Bedienungsanleitung
idatastart
idatastart CMHCXA0 Bedienungsanleitung
idatastart
idatastart BM1 Bedienungsanleitung
idatastart
idatastart HC1151A Bedienungsanleitung
idatastart
idatastart CMBMXA0 Bedienungsanleitung
idatastart
idatastart TR2650A Bedienungsanleitung
idatastart
idatastart ADS-BZ1 Bedienungsanleitung
idatastart
idatastart VW2410A Bedienungsanleitung
idatastart
idatastart TR3420BF Bedienungsanleitung
![idatastart COM-IDS(RS)-BZ3-[CMBMXA0]-EN Bedienungsanleitung](/data/manuals/tz/p/tzpu/sources/idatastart-com-ids-rs-bz3-cmbmxa0-en-manual.jpg "idatastart COM-IDS(RS)-BZ3-[CMBMXA0]-EN Bedienungsanleitung")
idatastart
idatastart COM-IDS(RS)-BZ3-[CMBMXA0]-EN Bedienungsanleitung
idatastart
idatastart HC2352AC Bedienungsanleitung
