IdAutomation SC7USB 2D Betriebsanleitung
1
CONTENTS
Introduction......................................................5
Installation and Setup...............................5
Compliance Notice....................................6
Limitation of Liability Notice.....................6
Verifying Barcodes with QA....................9
Default Settings ......................................10
Specifications..........................................12
Reading Characteristics...........................14
rogramming..........................................15
Interface Selection..................................16
RS-232.....................................................17
USB HID...................................................21
USB Virtual COM ...................................21
System Control................................................22
Scan.........................................................22
Auto-Sense Mode...................................23
Hands Free Time-Out..............................25
Indication ..............................................26
Thermal and Centering...........................34
Decode Search Mode..............................37
Output Sequence ...................................38
rint Contrast Weight.............................44
Working Orientation...............................45
Code Option....................................................46
Codabar...................................................47
2
Code 39...................................................49
Code 32 ..................................................53
Interleaved 2 of 5....................................54
Code 93...................................................55
Straight 2 of 5 Industrial ........................56
Straight 2 of 5 IATA .................................57
Matrix 2 of 5...........................................58
Code 11...................................................59
Code 128.................................................60
Telepen....................................................62
U C-A......................................................63
U C-E0....................................................66
EAN/JAN-13.............................................69
MSI..........................................................73
lessey Code...........................................74
GS1 DataBar Omnidirectional.................75
GS1 DataBar Limited...............................75
GS1 DataBar Expanded...........................76
osiCode.................................................77
Codablock F.............................................78
Code 16K.................................................79
Code 49...................................................80
DF417....................................................81
Micro DF417..........................................82
GS1 (EAN•UCC) Composite Codes..........83
ostal Codes............................................85
3
US S Intelligent Mail...............................85
US S ostnet...........................................85
QR Code..................................................89
Data Matrix.............................................90
MaxiCode................................................91
Chinese Sensible (Han Xin) Code............93
String Format..................................................94
refix/Suffix ............................................94
Function Code Transmit..........................97
Intercharacter, Interfunction, and
Intermessage Delays...............................97
Data Formatting....................................100
Data Format Editor Commands............103
OCR rogramming................................108
OCR Templates......................................112
OCR Template Codes.............................125
Utilities..................................................126
Test Chart of Common Barcodes .........128
roduct Code ID....................................130
ASCII Code Table ..................................132
OCR rogramming Chart.......................134
rogram Chart.......................................135
Reset Scanner to Default Settings.........136
Enable USB Keyboard Emulation ( C)...136
4
Introduction
This scanner will automatically scan a barcode at a distance of 3 to 8
inches from the symbol when the trigger is pulled. The scanner is
programmed by scanning barcodes from the manual when viewed on
the screen at 200% or more magnification from the PD . Successful
scanning shall be obtained by tilting the scanner with respect to the
barcode to avoid direct reflections that impair reading performance.
Installation and Setup
1.Connect the USB cable between scanner and PC.
2.To enable USB keyboard emulation, scan the appropriate barcode
below:
USB HID (PC)
USB HID (MAC)
3.If the scanner does not operate properly, remove the scanner from the
USB port and plug it into another port after scanning one of the USB
HID barcodes above.
4.If the scanner still does not operate properly, remove the cable from
the PC and pull the cable out of the scanner. Reinsert the cable in the
scanner.
5
Compliance Notice
These limits are designed to provide a reasonable protection
against harmful interface when the equipment is operated under
a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause
harmful interface to radio communications. Operation of this
equipment in a residential area may cause harmful interface, in
which case the user will be required to correct the interface at
his or her own expenses.
Limitation of Liability Notice
This limitation of hardware liability is necessary because
IDAutomation is a reseller of hardware and does not directly
manufacture any hardware devices. The entire limitation of
liability (including attorney’s fees, if any) under this policy
and/or the limited hardware warranty, if any, is 3 times the
original purchase price of the product (excluding any tax,
shipping and additional charges) at the time of purchase from
6
CC: This device complies with Part 15 of the CC Rules, (1) This
device may not cause harmful interface, and (2) This device
must accept any interface received, including interface that
may cause undesirable operation.
CE: This product conforms to the following standards
EMC:EN55022:2006+A1:2007, class B
EN55024:1998+A1:2001+A2:2003
BSMI:This device is compliant with requirement of BSMI and
granted ID No. R3A078
IDAutomation or the authorized affiliate or reseller. This
amount should be adequate to redirect any claims to the proper
manufacturer, however, it should be understood that all
intellectual property claims and all other claims relating to the
hardware itself are not directly the responsibility of
IDAutomation but rather only the manufacturer.
IDAUTOMATION, OUR RESELLERS AND A ILIATES
WILL NOT BE LIABLE OR ANY INDIRECT,
INCIDENTAL, SPECIAL, PUNITIVE OR
CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT
LIMITED TO ANY LOSS O PRO ITS OR POTENTIAL
PRO ITS, LOSS O SAVINGS OR ANTICIPATED
SAVINGS, LOSS O BUSINESS OR GOODWILL, LOSS O
DATA, LOSS O OPPORTUNITIES, OR LOSS O USE O
THE PRODUCT OR ANY EQUIPMENT, COST O
CAPITAL, COST O SUBSTITUTE OR REPLACEMENT
PRODUCT, EQUIPMENT, ACILITIES OR SERVICES,
DOWN TIME, YOUR TIME, REGARDLESS O THE
ORM O ACTION, ANY THIRD PARTY CLAIMS, AND
ANY INJURY TO PROPERTY OR BODILY INJURY
(INCLUDING DEATH) TO ANY PERSON, ARISING ROM
OR RELATING TO THE USE O OR THE INABILITY TO
USE THE PRODUCT OR ARISING ROM BREACH O
THE WARRANTY, BREACH O CONTRACT,
NEGLIGENCE, TORT, OR STRICT LIABILITY, WHETHER
OR NOT SUCH LOSS OR DAMAGE WAS ORESEEABLE,
7
EVEN I WE OR ANY O OUR A ILIATED COMPANIES
HAVE BEEN ADVISED O THE POSSIBILITY O SUCH
DAMAGES.
Other Notices:
All trademarks shall belong to their respective owners.
Specifications subject to change without notice.
Copyright 010 IDAutomation.com.
8
Verifying Barcodes with PQA
A unique feature of this scanner is the 2D QA ( rint Quality
Assessment) feature, which verifies and grades several attributes of a
barcode symbol. When enabled, QA works on all 2D symbols
including Data Matrix, DF417, MaxiCode, Aztec, QR-Code and US S
ostnet and Intelligent Mail. The QA report is transmitted as a second
beep after the barcode data. Enable this feature by scanning the
barcode below.
NOTE: When verifying symbols with PQA, be sure to carefully position
the scanner irectly over the barco e at an appropriate istance, such
as 5 or 6 inches. Different angles an istances may falsely lower the
gra e with respect to height, wi th an gaps.
9
efault Settings
For each barcode shown as below:
V = Enabled as default setting
- = Not supported
Empty space = Not enabled at default setting
Code Type Read
Enable
Checksum
Verification
Enable
Checksum
Transmission
Enable
Code
I
UPC-A V V V c
UPC-E0 V V V E
UPC-E1 E
EAN-13 V V V d
EAN-8 V V V D
Code-32 <
Code-39 V b
TCI Linked
Code 39
T
Code-49 I
Interleaved
2 of 5
V e
Industrial
2 of 5
- - e
Straight 2 of 5
IATA
f
Straight 2 of 5
Industrial
f
Matrix 2 of 5 m
Codabar V a
Code-128 V j
6
Inhaltsverzeichnis
Andere IdAutomation Barcode-Lesegerät Handbücher
Beliebte Barcode-Lesegerät Handbücher anderer Marken
POSMicro
POSMicro Datalogic PowerScan D7100 Bedienungsanleitung
Marson
Marson MT780 Kurzanleitung zur Einrichtung
NCR
NCR RealPOS Bedienungsanleitung
Motorola
Motorola SE3300 Kurzanleitung zur Einrichtung
Element
Element P130BT Bedienungsanleitung
Motorola
Motorola Symbol LS3008 Installations- und Betriebshandbuch
