IDS X Series Bedienungsanleitung
EASYLAB SOLUTIONS
Communicator to:
IDS X Series Alarm Panel
CONTACT ID Programming
See EasyLab Solutions Communicator connection diagram
to IDs X Series Alarm Panel Diagram
Keypad Programming:
Press: # 9999 * ( To access the IDS Programming )
Location 40:
Press: 40……( Serial Communicator Format )
➢Select 5, if is not on( Default it is already on for
Contact ID )
Location 46:
Press: 46……( Reporting Communications options )
➢Select 1, if it is not on( Default it is already on for
Tone Dialing )
Location 51:
Press: 51……( Telephone Number 01 )
Press: 1234
Press: * ( Enter )
Location 61:
Press: 61……( Reporting of partition 1 )
Press: 1234
Press: * ( Enter )
If NOT using more than 1 partition, SKIP to Programming of
location 211 ( Partition 1 arming options )
If using more partitions, follow below instructions for
partition 2 - 5 MAX
Press: 62……( Reporting of Partition 2 )
Press: 1234
Press: * ( Enter )
Press: 63……( Reporting of Partition 3 )
Press: 1234
Press: * ( Enter )
Press: 64……( Reporting of Partition 4 )
Press: 1234
Press: * ( Enter )
Press: 65……( Reporting of Partition 5 )
Press: 1234
Press: * ( Enter )
Location 211:
Press: 211……( Partition 1 Arm Options )
➢Select 16 ( Default it is not selected for Opening/
Closing user Reporting )
If NOT using more than 1 partition, SKIP to Programming of
location 581 (Split reporting Partitions, ONLY when using
the keyswitch function !!! )
If using more partitions, follow below instructions for
partition 2 - 5 MAX
Location 212:
Press: 212……( Partition 2 Arm Options )
➢Select 16 ( Default it is not selected for Opening/
Closing user Reporting )
Location 213:
Press: 213……( Partition 3 Arm Options )
➢Select 16 ( Default it is not selected for Opening/
Closing user Reporting )
Location 214:
Press: 214……( Partition 4 Arm Options )
➢Select 16 ( Default it is not selected for Opening/
Closing user Reporting )
Location 215:
Press: 215……( Partition 5 Arm Options )
➢Select 16 ( Default it is not selected for Opening/
Closing user Reporting )
Location 581:
Press: 581……( Split reporting Partition 1 )
➢Select 7 ( Default it is not selected for Armed
without user code reporting )
If using more partitions, follow below instructions for
partition 2 - 5 MAX
Location 582:
Press: 582……( Split reporting Partition 2 )
➢Select 7 ( Default it is not selected for Armed
without user code reporting )
Location 583:
Press: 583……( Split reporting Partition 3 )
➢Select 7 ( Default it is not selected for Armed
without user code reporting )
Location 584:
Press: 584……( Split reporting Partition 4 )
➢Select 7 ( Default it is not selected for Armed
without user code reporting )
Location 585:
Press: 585……( Split reporting Partition 5 )
➢Select 7 ( Default it is not selected for Armed
without user code reporting )
Press: # ,#, # ( To save and go out of programming
completely )
Keyswitch Away Arming Programming:
Press: # 9999 * ( To access the IDS Programming )
Location 1:
Press: 1
Press * ( Enter )
Enter the zone number to program as a keyswitch: for
example, Zone 1
Press: 1……( To Program Zone 1 )
Press: * ( Enter )
Press: 5……( To program Zone 5 as a keyswitch for Away
Arming/ Disarming )
Press: * ( Enter )
Press: # ,#, # ( To save and go out of programming
completely )
EASYLAB SOLUTIONS
Communicator to:
IDS X Series Alarm Panel
CONTACT ID Programming
Andere Handbücher für X Series
7
Inhaltsverzeichnis
Andere IDS Touchscreen Handbücher
Beliebte Touchscreen Handbücher anderer Marken
IBASE Technology
IBASE Technology ASTUT-152-RE1S Bedienungsanleitung
YASKAWA
YASKAWA TP 610C Bedienungsanleitung
B&R
B&R Power Panel C Series Bedienungsanleitung
Beijer Electronics
Beijer Electronics X2 control Bedienungsanleitung
AXIOMTEK
AXIOMTEK GOT321W-521 Bedienungsanleitung
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Bedienungsanleitung
