IDTECH ValueScan III Bedienungsanleitung

ValueScan III

IDBB-4244MRB

Barcode Scanner

User Manual

Version: 1.4

Date: 25 August 2019

Revision History

Version

Date

Description

Page #

1.0

2019/10/18

Initial release

1.2

2019/11/20

Updated scanner specifications

1.3

2019/12/17

Added Presentation Mode

1.4 2020/08/25

Modified the description of Disable

code39 transmit and Enable code39

transmit.

Updated manual style.

40-41

Regulatory Compliance

FEDERAL COMMUNICATIONS COMMISSION

INTERFERENCE STATEMENT

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio

or television reception, which can be determined by

turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the

following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and

receiver.

•Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

•Consult the dealer or an experienced radio/ TV

technician for help.

CAUTION:

Any changes or modifications not expressly approved by

the grantee of this device could void the user's authority

to operate the equipment.

Note: All brands and trademarks are the property of their

respective owners.

Note: The specifications contained herein are subject to

change without notice.

警告使用者:

這是甲類的資訊產品，在居住的環境中使用時，可

能會造成射頻干擾，在這種情況下，使用者會被要

求採取某些適當的對策。

Contents

1. INTRODUCTION ............................................................................ 6

2. UNPACKING .................................................................................. 8

3. GET STARTED ............................................................................... 9

3.1. INSTALLATION......................................................................................9

3.1.1. Set Up Your Scanner ...............................................................................9

3.2. HOW TO SCAN ..................................................................................10

4. CONTROLS AND SETTINGS.......................................................11

4.1. VERSION INFORMATION SETTING CODE .........................................11

4.2. INTERFACE MODE SETTING CODES................................................12

4.3. SCAN MODE SETTING CODES.........................................................13

4.4. SOUND SETTING CODES..................................................................14

4.5. CHARACTER DELETE,INSERT,AND REPLACEMENT SETTINGS....15

4.6. SERIAL PORT SETTINGS ..................................................................18

4.7. NORMAL FUNCTION SETTING CODES ............................................20

4.8. PREFIX /SUFFIX SETTING ................................................................22

4.9. MULTI-LANGUAGE SETTING CODES ..............................................24

4.10. CHARACTER TABLE........................................................................27

4.11. ENABLE AND DISABLE BARCODES...............................................40

5. PREFIX / SUFFIX CODE SETTING INSTRUCTIONS .................53

5.1. COMMON PRE/SUFFIX CODE .........................................................53

5.2. ADDING AN EXCLUSIVE SUFFIX CODE..............................................54

5.3. SLEEP TIME SETTING /BUTTON TIMEOUT SETTING ......................55

5.4. HIDING CHARACTERS.......................................................................56

6. BARCODE TYPES CODE TABLE.................................................57

7. ASCII TABLE 1 .............................................................................58

7.1. TIP 1..................................................................................................59

7.2. TIP 2..................................................................................................59

8. ASCII TABLE 2 .............................................................................60

9. SPECIFICATIONS ........................................................................65

1. Introduction

Your VALUESCAN III is a 1D CCD scanner that has been

configured at the factory with default settings.

Because many host systems have unique formats and

protocol requirements, ID TECH provides a wide range of

configurable features that may be selected using this

bar-code-based configuration tool. After the

configuration is completed, the scanner stores the

settings in nonvolatile memory. The embedded memory

saves the settings when the power is turned off.

Turn off the computer’s power before connecting the

scanner, and then power up the computer after the

scanner is fully connected.

To change a parameter value, scan the appropriate bar

codes in this guide. These new values replace the default

values in memory.

NOTE: Most computer monitors allow uses to scan bar

codes directly from the screen. When scanning from a

screen, be sure to set the document magnification to a

level where you can see the bar code clearly and bars

and/or spaces are not merging.

Application Field:

•Jewelry Tag

•Manufacturing

•Transportation & Logistics

•Healthcare

Features:

•Makes daily work simple and easy

•2500-pixel CCD image sensor

•Scan Speed ≧270 times/sec

•Maximum reading resolution: 3mil (0.762mm)

•Depth of Field: 15~330mm

(EAN, 13mil/0.33mm, PCS 90%)

•Drop resistance: 1.5 meters onto concrete

•Auto-sensing (presentation) mode available

Presentation Mode

※

Just scan the Presentation

Mode barcode on the stand to

easily switch to presentation

mode for the VALUESCAN III

scanner.

2. Unpacking

Make sure the following items were included in your

package:

•Scanner x1

•Stand x1

•Quick Start Guide x1

•USB Cable x1

When you receive your scanner, open the package

immediately and inspect for shipping damage. If you

discover any damage, contact the shipping company and

file a claim. ID TECH is not responsible for any damage

incurred during shipping. Save all packing materials for

the shipping company to inspect.

Note: If any item is missing, contact your local dealer.

3. Get started

This chapter provides information about installing,

connecting, and using your scanner.

3.1. Installation

Install your scanner with the steps below.

3.1.1. Set Up Your Scanner

1. Plug the RJ45 connector into the scanner’s RJ45 port,

until it clicks.

2. Insert the USB connector to your computer.

3. Turn on your computer. It will autodetect your

scanner.

4. To test your scanner, start a text editing program like

Notepad or Microsoft Word. Scan a bar code to see if

the scanner can send data to your computer. If it’s

successful, you’ll hear a beep and see the bar code

data in the text editing program.

3.2. How to scan

VALUESCAN III emits a light bar when it is scanning. To

scan a barcode, make sure the aiming beam crosses every

bar and space of the barcode. This bar needs to cross the

bar code horizontally to decode it.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IDTECH Barcode-Lesegerät Handbücher

IDTECH

IDTECH 2DScan Bedienungsanleitung

IDTECH

IDTECH MiniMag RS232 Bedienungsanleitung

IDTECH

IDTECH VersaScan II Gebrauchsanweisung

IDTECH

IDTECH VersaScan II Bedienungsanleitung

IDTECH

IDTECH 2DScan FX100 Gebrauchsanweisung

IDTECH

IDTECH EconoScan II Gebrauchsanweisung

IDTECH

IDTECH Econoscan Bedienungsanleitung

IDTECH

IDTECH Ez One Shot Bedienungsanleitung

IDTECH

IDTECH ValueScan II Gebrauchsanweisung

IDTECH

IDTECH BluScan Bedienungsanleitung

IDTECH

IDTECH ValueScan II Bedienungsanleitung

IDTECH

IDTECH Ez One Shot Bedienungsanleitung

IDTECH

IDTECH BluScan Gebrauchsanweisung

IDTECH

IDTECH BTScan Bedienungsanleitung

IDTECH

IDTECH Econoscan Bedienungsanleitung

IDTECH

IDTECH ValueScan II Bedienungsanleitung

IDTECH

IDTECH ValueScan III IDBB-4244MRB Bedienungsanleitung

IDTECH

IDTECH 2DScan FX200 Gebrauchsanweisung

IDTECH

IDTECH 2DScan FX100 Bedienungsanleitung

IDTECH

IDTECH Econoscan Bedienungsanleitung

IDTECH

IDTECH ValueScan II Gebrauchsanweisung

IDTECH

IDTECH Econoscan II Betriebsanleitung

IDTECH

IDTECH 30 Bedienungsanleitung

IDTECH

IDTECH EconoScan II Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung