IEI Technology WS-843A Bedienungsanleitung
WS-843A
User Manual
Version 1.2
12.1” TFT Display
Workstation
February 3, 2004
1
Copyright Notice
© Copyright 2004 by ICP Electronics Inc. All rights reserved.
The information in this document is subject to change without prior notice in
order to improve reliability, design and function and does not represent a
commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental,
or consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights
are reserved. No part of this manual may be reproduced by any mechanical,
electronic, or other means in any form without prior written permission of the
manufacturer.
Trademarks
WS-843A is a registered trademark of ICP Electronics Inc. IBM PC is a registered
trademark of International Business Machines Corporation. Intel is a registered
trademark of Intel Corporation. Other product names mentioned herein are used
for identification purposes only and may be trademarks and/or registered
trademarks of their respective companies. If you have any questions or need
other information, please visit to our web site.
http://www.ieiworld.com
2
Table of Contents
CHAPTER 1 PRODUCT INFORMATION ..................................................3
1.1 GENERAL INFORMATION ......................................................................3
1.2 PRODUCT SPECIFICATIONS ...................................................................4
1.3 DIMENSIONS...................................................................................5
1.4 FRONT ACCESSIBLE CD-ROM AND 3.5" FDD............................................6
1.5 SEALED-MEMBRANE ACCESSIBLE KEYPAD..................................................8
CHAPTER 2 SYSTEM SETUP ................................................................9
2.1 CARDS AND CARD CLAMPS INSTALLATION..................................................9
2.2 DISK DRIVES INSTALLATION ............................................................... 10
2.3 POWER SUPPLY INSTALLATION ............................................................. 11
2.4 COOLING FAN INSTALLATION AND FILTER REPLACING................................... 12
2.5 RACK MOUNTING ............................................................................ 13
2.6 PANEL MOUNTING ........................................................................... 14
CHAPTER 3 MAINTENANCE............................................................... 15
3.1 POWER SUPPLY .............................................................................. 15
3.2 COOLING FAN................................................................................ 15
3.3 DISK DRIVES ................................................................................ 15
APPENDIX A EXPLODED DIAGRAM ......................................................16
APPENDIX B KEYPAD...........................................................................17
A. BLOCK DIAGRAM .................................................................................. 17
B. JUMPER SETTING .................................................................................. 17
APPENDIX C TOUCH PANEL CONTROLLER............................................19
APPENDIX D TOUCH PAD .....................................................................20
APPENDIX E USER MODE OSD ITEM DESCRIPTION .............................21
3
Chapter 1 Product Information
1.1 General Information
The WS-843A series workstations take advantage of modern flat-panel display
technology. This system unit consists of a CPU board, a power supply, a passive
backplane and a touch-pad for minimum size.
LCD Display
The WS-843A series workstations are equipped with a color 800 x 600
resolution 12.1” TFT LCD display.
Versatile Passive Backplane
WS-843A workstation is compatible with BP-10S, BP-10SD, IP-10S, PX-10S
or PCI-10S, PCI-10S2 and IP-10S2 backplane.
Optional Power Supply
The standard industrial power supply for WS-843A is ACE-832A; and other
optional compatible power supplies are listed below:
ACE-916V, ACE-925C, ACE-925T/932T or ACE-920A/932A/935A series.
Sealed-membrane Accessible Keypad
The sealed-membrane keypad has 59 data keys, including 10 function keys
to allow users enter data directly.
Power Switch and USB Port
The lockable drive door protects the power switch and USB port.
4
1.2 Product Specifications
7U height workstation for rack-mounting and panel-mounting
Disk Drive Bay: Supports one 5.25" CD-ROM, one 3.5" FDD and one 3.5" HDD
Fan Module: 12-cm cooling fan and removable fan filter
Touch Pad Module: TP-101 (including 2 buttons)
59 data entry keys, including 10 function keys
Front LCD on/off switch and OSD button
Lockable drive door design
Anti-vibration card clamp
Optional Backplanes: BP-10S, BP-10SD, IP-10S, IP-10S2,PX-10S or PCI-10S
PCI-10S2
Power Supply: standard equipped with ACE-832A industrial power supply
Optional Power Supplies: ACE-916V (12VDC input), ACE-925C (24VDC input),
or ACE-925T/ 932T (-48VDC input), or ACE-920A/
932A/ 935A (AC input)
Optional Touch Screen: Dynapro® resistive type with RS-232 controller.
Operating Temperature: 0 ~ 50℃
Relative Humidity: 10 -95%, @40°C non-condensing
Dimensions: 483 x 310 x 271.7 mm
Color: white (Pantone 413C) and black
LCD Display
Model WS-843A
Display Type 12.1" TFT color
Resolution 800 X 600
LCD Display Colors 262k,18bits
Brightness 250cd/m2
Temperature 0-500C
LCD MTBF 50,000 hrs
Backlight MTBF 30,000 hrs
5
1.3 Dimensions
The following diagram indicates the dimensions of WS-843A:
Front Panel: 483 mm (W) x 310mm (H) x 12mm (D)
Cabinet: 433 mm (W) x 291mm (H) x 259.7mm (D)
F3
F6
!
F9
F1
F4
~
F7 F8
F5
F2
D
C
L
JK
)
GH
P
"
`
O
'
X
.
W
ST
>
A
I
(
E
M
U
,
Q
<
V
N
R
B
F
89
23
.
56
Y
7
1
0
4
Z
271.70
3.00
310.00
4.00
303.00
433.00
259.70
42.70
417.80
234.85
57.15
O465.00
483.00
D6.5x8.5
6
1.4 Front Accessible CD-ROM and 3.5" FDD
WS-843A workstation is equipped with one 5.25” CD-ROM, one 3.5" FDD and one
3.5” HDD. The CD-ROM and FDD are accessible by loosening the two captive
fasteners of lockable door as shown in the following diagram. A power switch and
a USB port are also reachable through opening this front lockable door.
F3
F6
!
F9
F1
F4
~
F7 F8
F5
F2
D
C
L
JK
)
GH
P
"
`
O
'
X
.
W
ST
>
A
I
(
E
M
U
,
Q
<
V
N
R
B
F
89
23
.
56
Y
7
1
0
4
Z
7
Display Module:
`
'
8
1.5 Sealed-Membrane Accessible Keypad
The sealed-membrane keypad has 59 data keys, including 10 function keys to
allow users to enter data directly. A built-in controller will merge the signals from
the membrane keypad into one signal that acts as a standard IBM PC/AT
keyboard.
'
`
9
Chapter 2 System Setup
The following sections of this chapter show how to install the components and do
the maintenance.
2.1 Cards and Card Clamps Installation
Before installing the cards, the back cover should be removed first by releasing
screws as shown in the diagram below. Then, users can slowly slide the card in
and carefully press it into the appropriate slot of backplane. The card clamp is
designed to hold the add-on cards so as to let it be affixed securely into the slots
moreover to prevent them from vibrating. You may install the Card Clamp after
inserting all the add-on cards by following the steps below:
STEP 1: Place the Card Clamp into the chassis. Insert one side of the Card Clamp
to the fixed hole of the chassis.
STEP 2: If the add-on card is too short, use the holding clamp to hold the card
and fix the holding clamp using screws.
STEP 3: Put one screw on the other side of the Card Clamp then fasten it.
STEP 3
STEP 2
STEP 1
Inhaltsverzeichnis
Andere IEI Technology Desktop Handbücher
IEI Technology
IEI Technology AFLLX Series Bedienungsanleitung
IEI Technology
IEI Technology IDS-310-AL Bedienungsanleitung
IEI Technology
IEI Technology PCIE-Q370 Bedienungsanleitung
IEI Technology
IEI Technology AFL-26A-9652 Bedienungsanleitung
IEI Technology
IEI Technology AFL-xxA-N26 Bedienungsanleitung
IEI Technology
IEI Technology tKINO-ULT3 Bedienungsanleitung
IEI Technology
IEI Technology ECK-1000 Series Bedienungsanleitung
IEI Technology
IEI Technology AFL-W19A Bedienungsanleitung
IEI Technology
IEI Technology DRPC-120-BTi Bedienungsanleitung
IEI Technology
IEI Technology AFL2-12A-HM65 Series Bedienungsanleitung
IEI Technology
IEI Technology IOVU-07F-AD Bedienungsanleitung
IEI Technology
IEI Technology TANK-800 Bedienungsanleitung
IEI Technology
IEI Technology AFL-F08A-N270 Bedienungsanleitung
IEI Technology
IEI Technology TANK-760 Bedienungsanleitung
IEI Technology
IEI Technology DRPC-240-TGL Bedienungsanleitung
IEI Technology
IEI Technology NANO-8522 Bedienungsanleitung
IEI Technology
IEI Technology ECN-581A-QM57 Bedienungsanleitung
IEI Technology
IEI Technology AFOLUX AFL-315AW/B Bedienungsanleitung
IEI Technology
IEI Technology IVS-300 Bedienungsanleitung
IEI Technology
IEI Technology AFL2-W15A-N270/L325 Bedienungsanleitung
