IEK ARMA2L 3 Series Bedienungsanleitung
Êðàòêîå ðóêîâîäñòâî ïî ýêñïëóàòàöèè
Ïàññàòèæè îáúåäèíÿþò â ñåáå ôóíêöèè:
Ïàññàòèæè ñåðèè K1 òîâàðíîãî çíàêà IEK (äàëåå — ïàññàòèæè) —
ìíîãîôóíêöèîíàëüíûé ðó÷íîé èíñòðóìåíò, ïðåäíàçíà÷åííûé
äëÿ ïðîâåäåíèÿ ñëåñàðíûõ è ýëåêòðîìîíòàæíûõ ðàáîò.
Äîïóñêàåòñÿ ýêñïëóàòàöèÿ ïðè òåìïåðàòóðå 70 °Ñ ïðè ìàêñèìàëüíîì
çíà÷åíèè îòíîñèòåëüíîé âëàæíîñòè âîçäóõà 20 %.
— òåìïåðàòóðà îêðóæàþùåé ñðåäû îò ìèíóñ 20 °Ñ äî ïëþñ 50 °Ñ;
Íîðìàëüíûìè óñëîâèÿìè ýêñïëóàòàöèè èíñòðóìåíòà ÿâëÿþòñÿ:
Îñíîâíûå ñâåäåíèÿ îá èçäåëèè
Ðó÷íîé ñëåñàðíî-ìîíòàæíûé èíñòðóìåíò (äàëåå — èíñòðóìåíò) ñåðèè
ARMA2L 3 Ê1 òîâàðíîãî çíàêà IEK èñïîëüçóåòñÿ ïðè ïðîèçâîäñòâå
ìîíòàæíî-ñáîðî÷íûõ, ýëåêòðîìîíòàæíûõ è ñòðîèòåëüíûõ ðàáîò.
— ìàêñèìàëüíàÿ îòíîñèòåëüíàÿ âëàæíîñòü âîçäóõà 80 % ïðè 25 °Ñ.
 ñîñòàâ ðó÷íîãî ñëåñàðíî-ìîíòàæíîãî èíñòðóìåíòà âõîäÿò øàðíèðíî-
ãóáöåâûå èíñòðóìåíòû è îòâåðòêè.
Êàáåëåðåç ñåðèè K1 òîâàðíîãî çíàêà IEK (äàëåå — êàáåëåðåç)
ïðåäíàçíà÷åí äëÿ îòðåçàíèÿ ìåäíîãî èëè àëþìèíèåâîãî êàáåëÿ òîëùèíîé
äî 12 ìì.
Òîíêîãóáöû ñåðèè K1 òîâàðíîãî çíàêà IEK (äàëåå — òîíêîãóáöû)
ïðåäíàçíà÷åíû äëÿ ôèãóðíîãî ñãèáàíèÿ ïðîâîëîêè ïðè ïðîâåäåíèè
ýëåêòðîìîíòàæíûõ ðàáîò. Êîíóñíàÿ ôîðìà ãóáîê äà¸ò âîçìîæíîñòü äåëàòü
èçãèá ñ ðàçíûì ðàäèóñîì. Êðóòÿùèé ìîìåíò íå áîëåå 5 Í·ì.
Îòâ¸ðòêè óíèâåðñàëüíûå ñåðèè K1 òîâàðíîãî çíàêà IEK (äàëåå
îòâ¸ðòêè) ïðåäíàçíà÷åíû äëÿ çàêðó÷èâàíèÿ è îòêðó÷èâàíèÿ âèíòîâ
— ïëîñêîãóáöåâ;
— áîêîâûõ êóñà÷åê äëÿ ðåçêè ïðîâîëîêè è ïðîâîäîâ;
— ïðèñïîñîáëåíèÿ äëÿ çàõâàòà è çàæèìà ðàçíîîáðàçíûõ ïî ôîðìå
äåòàëåé, â òîì ÷èñëå è öèëèíäðè÷åñêèõ.
Êóñà÷êè áîêîâûå ñåðèè K1 òîâàðíîãî çíàêà IEK (äàëåå — êóñà÷êè)
ïðåäíàçíà÷åíû äëÿ ïåðåêóñûâàíèÿ ïðîâîëîêè, ïðîâîäîâ ïðè âûïîëíåíèè
ñëåñàðíûõ, ýëåêòðîìîíòàæíûõ è ñòðîèòåëüíûõ ðàáîò. Íàãðóçêà äëÿ
ïåðåêóñûâàíèÿ ïðîâîëîêè íå áîëåå 570 Í.
1
ÈÍÑÒÐÓÌÅÍÒ ÑËÅÑÀÐÍÎ-ÌÎÍÒÀÆÍÛÉ
ÑÅÐÈÈ ARMA2L 3
RU
2
Êëåùè ïåðåñòàâíûå ñåðèè Ê1 òîâàðíîãî çíàêà IEK (äàëåå êëåùè)
ïðåäíàçíà÷åíû äëÿ çàõâàòà ïëîñêèõ, êðóãëûõ è ìíîãîãðàííûõ äåòàëåé.
Êðóãëîãóáöû ñåðèè Ê1 òîâàðíîãî çíàêà IEK (äàëåå — êðóãëîãóáöû)
ïðåäíàçíà÷åíû äëÿ òî÷å÷íîãî çàõâàòà ïðîâîëîêè, ìåòàëëè÷åñêîé æèëû,
ïðóòêà, è âûïîëíåíèÿ ðàâíîìåðíîãî èçãèáà. Îñíîâíîå ïðåäíàçíà÷åíèå
êðóãëîãóáöåâ — ñãèáàíèå ïðîâîëîêè è óçêèõ òîíêèõ ïëàñòèí.
è øóðóïîâ ñ ïðÿìûì èëè êðåñòîîáðàçíûì øëèöåì â ñîîòâåòñòâèè ñ òèïîì
è íîìåðîì øëèöåâ.
Ñîñòàâ íàáîðîâ èíñòðóìåíòà ïðèâåäåíû â òàáëèöå 4.
Êîìïëåêòíîñòü
ÇÀÏÐÅÙÀÅÒÑß
Ìåðû áåçîïàñíîñòè
Òåõíè÷åñêèå äàííûå
ÐÀÁÎÒÀÒÜ Ñ ËÅÑÀÐÍÎ-ÌÎÍÒÀÆÍÛÌ È ÍÑÒÐÓÌÅÍÒÎÌ Ñ ÅÐÈÈ Ê 1
 ÝËÅÊÒÐÎÓÑÒÀÍÎÂÊÀÕ, Í ÀÕÎÄßÙÈÕÑß Ï ÎÄ ÍÀÏÐßÆÅÍÈÅÌ.
Îñíîâíûå ïàðàìåòðû èíñòðóìåíòà â ñîîòâåòñòâèè ñ ðàçìåðàìè
ïðèâåäåíû â òàáëèöàõ 1 è 2.
Ïåðåä íà÷àëîì ðàáîòû âíèìàòåëüíî èçó÷èòå ðóêîâîäñòâî
ïî ýêñïëóàòàöèè è óêàçàíèÿ ïî òåõíèêå áåçîïàñíîñòè.
ÂÍÈÌÀÍÈÅ
ÇÀÏÐÅÙÀÅÒÑß
Êîìïëåêò ïîñòàâêè èçäåëèé ïðèâåäåí â òàáëèöå 3.
ÏÐÈÊÀÑÀÒÜÑß ÎÒ¨ÐÒÊÎÉ ÈËÈ ÄÐÓÃÈÌ ÈÍÑÒÐÓÌÅÍÒÎÌ ÑÅÐÈÈ Ê1
Ê ×ÀÑÒßÌ ÝËÅÊÒÐÎÓÑÒÀÍÎÂÎÊ,
ÍÀÕÎÄßÙÈÕÑß ÏÎÄ ÍÀÏÐßÆÅÍÈÅÌ,
ËÈÁÎ Â ÍÅÏÎÑÐÅÄÑÒÂÅÍÍÎÉ ÁËÈÇÎÑÒÈ ÎÒ ÒÀÊÈÕ ×ÀÑÒÅÉ.
Øàðíèðíî-ãóáöåâûé èíñòðóìåíò è îòâåðòêè ñåðèè Ê1 îáîðóäîâàíû
äåêîðàòèâíûìè íàêëàäêàìè íà ðóêîÿòêè, êîòîðûå íå ÿâëÿþòñÿ
èçîëèðóþùèìè îò ýëåêòðè÷åñêîãî íàïðÿæåíèÿ.
ÂÍÈÌÀÍÈÅ
Êëàññ çàùèòû îò ïîðàæåíèÿ ýëåêòðè÷åñêèì òîêîì:
0 ïî ÃÎÑÒ 12.2.007.0.
3
Íå óäàðÿéòå ìîëîòêîì ïî âåðõíåé ãóáêå èíñòðóìåíòà ïðè
ïåðåêóñûâàíèè ïðîâîëîêè, òàê êàê ýòî ïðèâåä¸ò ê ïîëîìêå èíñòðóìåíòà.
ÂÍÈÌÀÍÈÅ
ÂÍÈÌÀÍÈÅ
Ïðè ðàáîòå êàáåëåðåçîì íå ïðåâûøàéòå óêàçàííîå
ìàêñèìàëüíîå ñå÷åíèå êàáåëÿ.
ÂÍÈÌÀÍÈÅ
Íåâûïîëíåíèå ïðàâèë òåõíèêè áåçîïàñíîñòè ïðè âûïîëíåíèè
ýëåêòðîìîíòàæíûõ ðàáîò ìîæåò ñòàòü ïðè÷èíîé òÿæ¸ëîé òðàâìû
è âûõîäà èíñòðóìåíòà èç ñòðîÿ.
.
Îçíàêîìüòåñü ñ íàçíà÷åíèåì èíñòðóìåíòà, åãî êîíñòðóêöèåé
è ðóêîâîäñòâîì ïî ýêñïëóàòàöèè.
Ðàáîòàéòå òîëüêî èñïðàâíûì èíñòðóìåíòîì. Ïåðåä êàæäûì
ïðèìåíåíèåì èíñòðóìåíò äîëæåí áûòü îñìîòðåí. Èçîëèðóþùèå ïîêðûòèÿ
ðóêîÿòîê íå äîëæíû èìåòü äåôåêòîâ, êîòîðûå ïðèâîäÿò ê ñíèæåíèþ
ìåõàíè÷åñêîé ïðî÷íîñòè. Íå äîëæíî áûòü òðåùèí, ñëîìàííûõ ãóáîê,
ðóêîÿòîê.
Èñïîëüçóéòå îòâ¸ðòêè è øàðíèðíî-ãóáöåâûé èíñòðóìåíò
òîëüêî ïî íàçíà÷åíèþ. Íå ïðèìåíÿéòå èíñòðóìåíò â êà÷åñòâå ðû÷àãà,
çóáèëà, óäàðíîãî èíñòðóìåíòà, êëèíà.
Ïðàâèëà ýêñïëóàòàöèè
Óäåðæèâàéòå èíñòðóìåíò òàê, ÷òîáû êèñòü ðóêè âî âðåìÿ ðàáîòû
ðàñïîëàãàëàñü äî ïðåäîõðàíèòåëüíîãî óïîðà ðóêîÿòîê. Íåïðàâèëüíûé
çàõâàò ðóêîÿòîê ìîæåò ïðèâåñòè ê òðàâìå.
Óäåðæèâàéòå èíñòðóìåíò ïîä óãëîì 90° ê ýëåìåíòàì, êîòîðûå
òðåáóåòñÿ ïåðåêóñèòü.
Ïðè ïåðåêóñûâàíèè ïðîâîëîêè èñïîëüçóéòå çàùèòíûå ýêðàíû (øèðìû)
è ñðåäñòâà èíäèâèäóàëüíîé çàùèòû: î÷êè, çàùèòíûå ëèöåâûå ìàñêè,
ïåð÷àòêè, îäåæäó, îáóâü è ãîëîâíûå óáîðû.
Âûáèðàéòå èíñòðóìåíò, ñîîòâåòñòâóþùèé âèäó ðàáîò.
Âûáèðàéòå îòâ¸ðòêó, ñîîòâåòñòâóþùóþ òèïó êðåï¸æíîãî ýëåìåíòà.
Òèïû øëèöåâ îòâ¸ðòîê PH è PZ ïîõîæè, íî íå ÿâëÿþòñÿ
âçàèìîçàìåíÿåìûìè. Íå ïðèìåíÿéòå îòâ¸ðòêè òèïà PH äëÿ âèíòîâ ñ òèïîì
øëèöåâ êîíòàêòíîé ÷àñòè PZ è íàîáîðîò.
Èñïîëüçóéòå ïîäõîäÿùèé òåìï ðàáîòû. Ðàáîòàéòå èíñòðóìåíòîì
íå òîðîïÿñü, áåç ñïåøêè.
4
Îòâ¸ðòêà ðåìîíòó íå ïîäëåæèò.  ñëó÷àå ïîâðåæäåíèÿ èçîëÿöèè
èíñòðóìåíòà, îáðàçîâàíèÿ òðåùèí, ãëóáîêîé êîððîçèè ëîïàòêè, ïîëîìêè
øëèöåâ — îòâ¸ðòêó çàìåíèòü.
Øàðíèðíî-ãóáöåâûé èíñòðóìåíò ðåìîíòó íå ïîäëåæèò.  ñëó÷àå
ïîëîìêè ãóáîê, ðóêîÿòîê, ïîâðåæäåíèÿ èçîëÿöèè èíñòðóìåíòà, îáðàçîâàíèÿ
òðåùèí, ãëóáîêîé êîððîçèè — èíñòðóìåíò çàìåíèòü.
Ïðè íîðìàëüíîì ôóíêöèîíèðîâàíèè ïî èñòå÷åíèè ñðîêà ñëóæáû
ñëåñàðíî-ìîíòàæíûé èíñòðóìåíò íå ïðåäñòàâëÿåò îïàñíîñòè â äàëüíåéøåé
ýêñïëóàòàöèè.
Îáñëóæèâàíèå
Ïî îêîí÷àíèè ðàáîòû î÷èñòèòå èíñòðóìåíò âåòîøüþ. Íå èñïîëüçóéòå
äëÿ î÷èñòêè ïëàñòèêîâîé ðóêîÿòêè ðàñòâîðèòåëè è íåôòåïðîäóêòû.
Õðàíèòå èíñòðóìåíò â ïîìåùåíèè, íå ñîäåðæàùåì àãðåññèâíîé ñðåäû,
ïîâûøåííîé âëàæíîñòè, òåìïåðàòóðû è ïðÿìûõ ñîëíå÷íûõ ëó÷åé.
Õðàíèòå èíñòðóìåíò â òðóäíîäîñòóïíîì äëÿ äåòåé ìåñòå.
Òðàíñïîðòèðîâàíèå, õðàíåíèå è óòèëèçàöèÿ
Òðàíñïîðòèðîâàíèå èíñòðóìåíòà îñóùåñòâëÿåòñÿ â óïàêîâêå
èçãîòîâèòåëÿ ëþáûì âèäîì êðûòîãî òðàíñïîðòà, îáåñïå÷èâàþùèì
ïðåäîõðàíåíèå óïàêîâàííûõ èçäåëèé îò ìåõàíè÷åñêèõ ïîâðåæäåíèé,
çàãðÿçíåíèÿ è ïîïàäàíèÿ âëàãè, ïðè òåìïåðàòóðå îêðóæàþùåãî âîçäóõà
îò ìèíóñ 40 °Ñ äî ïëþñ 50 °Ñ.
Õðàíåíèå èíñòðóìåíòà íåîáõîäèìî îñóùåñòâëÿòü â óïàêîâêå
èçãîòîâèòåëÿ â ïîìåùåíèÿõ ñ åñòåñòâåííîé âåíòèëÿöèåé ïðè òåìïåðàòóðå
îêðóæàþùåãî âîçäóõà îò ìèíóñ 40 °Ñ äî ïëþñ 50 °Ñ è ìàêñèìàëüíîé
îòíîñèòåëüíîé âëàæíîñòè 98 % ïðè 25 °Ñ.
Óòèëèçàöèÿ èíñòðóìåíòà ïðîèçâîäèòñÿ ïî òðåáîâàíèÿì
çàêîíîäàòåëüñòâà íà òåððèòîðèè ðåàëèçàöèè.
Ñðîê ñëóæáû è ãàðàíòèè èçãîòîâèòåëÿ
Ãàðàíòèéíûé ñðîê ýêñïëóàòàöèè èíñòðóìåíòà — 1 ãîä ñî äíÿ ïðîäàæè
ïðè ñîáëþäåíèè ïîòðåáèòåëåì ïðàâèë ýêñïëóàòàöèè, òðàíñïîðòèðîâàíèÿ
è õðàíåíèÿ.
Ñðîê ñëóæáû èíñòðóìåíòà — íå ìåíåå 5 ëåò.
5
Basic product data
Hand-held fitting and assembly tools (hereinafter — the tool) ARMA2L 3 K1
series of IEK trademark are used during performance of fitting and assembly,
electrical installation and construction works.
Ñombination pliers of K1 series of IEK trademark (hereinafter — pliers) —
multifunctional hand tool, designed for carrying out fitting and assembly works.
Operation at temperature of 70 °C at a maximum relative humidity of 20% is
allowed.
The round nose pliers of K1 series of the IEK trademark (hereinafter — the
round nose pliers) are designed for gripping wire, metal core, rod, and
Needle-nose pliers of K1 series of the IEK trademark (hereinafter — needle-
nose pliers) are designed for shaped bending wire during performance of
electrical installation works. Tapered shape of the jaws makes it possible to make
bends with different radii. The torque is max 5 N·m.
Hand-held fitting and assembly tools include hinged pliers and screwdrivers.
Cable cutter of K1 series of IEK trademark (hereinafter — cable cutter)
is designed for cutting of copper or aluminum cables up to 12 mm thick.
— gripping and clamping devices for various shapes of parts, including
cylindrical ones.
Side cutters of K1 series of the IEK trademark (hereinafter — cutters) are
designed for cutting wires, cables during carrying out fitting, electrical installation
and construction works. The load for wire-cutting does not exceed 570 N.
— side cutting pliers for wire cutting;
— ambient temperature from minus 20 °C to plus 50 °Ñ;
Pliers combine the functions of:
Normal operating conditions for the tool are as follows:
— flat nose pliers;
Allen screwdrivers of K1 series of IEK trademark (hereinafter referred to as
screwdrivers) are designed for screwing and unscrewing of screws and wood
screws with straight or Phillips slots according to the type and number of slots.
— maximum relative humidity of 80 % at 25 °Ñ.
EN
Passport
A2L3.K1.001.1
FITTING AND ASSEMBLY TOOL OF ARMA2L 3 SERIES
6
Before starting work, carefully read the operating manual
and safety instructions.
performing a uniform bend. The main purpose of round nose pliers is to bend
wire and narrow thin plates.
ATTENTION
Adjustable pliers of K1 series of IEK trademark (hereinafter referred to as
pliers) are designed for gripping flat, round and multi-sided parts.
Technical data
The delivery set of the products is shown in table 3.
The main parameters of the tool according to the dimensions are given
in tables 1 and 2.
Electric shock protection class: 0.
The contents of the tool kits are shown in table 4.
Safety precautions
Completeness of set
IT IS FORBIDDEN
IT IS FORBIDDEN
TO USE A SCREWDRIVER OR ANY OTHER K1 SERIES TOOL
TO TOUCH LIVE PARTS OF ELECTRICAL INSTALLATIONS OR IN THE DIRECT
VICINITY OF SUCH PARTS.
ATTENTION
TO OPERATE FITTING AND ASSEMBLY TOOLS OF K1 SERIES
IN LIVE ELECTRICAL INSTALLATIONS.
Pliers and screwdrivers of the K1 series are equipped with decorative
handle covers that are not insulating against electrical voltages.
ATTENTION
ATTENTION
Disregard for the safety regulations for electrical installation works may
cause severe electrical injuries and failure of the tool.
When working with the cable cutter, do not exceed the specified
maximum cable cross-section.
7
Operating rules
ATTENTION
Hold the tool so that the hand reaches the safety stop of the handles during
operation. Improper grip of the handles could cause injury.
Do not hit the upper jaw of the tool with a hammer when you cut the wire, as
this will cause tool breakage.
Choose the right tool for the type of work.
Use an appropriate pace of work. Handle with the tool slowly, without
rushing.
The screwdriver cannot be repaired. In case of damage to the tool insulation,
formation of cracks, deep corrosion of the blade, breakage of slots - replace the
screwdriver.
Pliers cannot be repaired. In case of breakage of jaws, handles, damage of
tool insulation, formation of cracks, deep corrosion - replace the tool.
The fitting and assembly tool does not pose a danger in further use if it
functions normally at the end of its service life.
Familiarize yourself with the purpose of the tool, its design and operating
manual.
Choose the right screwdriver for the type of fastener. PH and PZ screwdrivers
have similar but not interchangeable slots. Do not use PH screwdrivers for screws
with PZ contact slot and vice versa.
Work only with tools that are in good condition. The tool should be inspected
before each use. The insulating coatings of the handles should be free of defects
that lead to a reduction in mechanical strength. There should be no cracks,
broken jaws or handles.
Use screwdrivers and pliers only for their intended purpose.
Do not use the tool as a lever, chisel, impact tool, and wedge.
Hold the tool at a 90° angle to the part you want to cut.
When cutting wire, use protective shields (screens) and personal protective
equipment: goggles, face masks, gloves, clothing, shoes, and hats.
Maintenance
Clean the tool with a rag at the end of work. Do not use solvents or petroleum
products to clean the plastic handles.
Store the tool in a room free of corrosive environments, high humidity,
temperature, and direct sunlight.
Keep the tool out of the reach of children.
8
The tool is disposed of in accordance with the legislation in the sales
territory.
The warranty period is 1 year from the date of sale, provided the user
observes the rules of operation, transportation and storage.
The tool should be stored in the manufacturer's package in rooms with
natural ventilation at ambient air temperature from minus 40 °Ñ to plus 50 °Ñ
and maximum relative humidity of 98 % at 25 °Ñ.
Transportation, storage and disposal
Service life and manufacturer's warranty
Tool service life — at least 5 years.
The tool is transported in the manufacturer's package by any type of covered
transport that protects the packed products from mechanical damage,
contamination and moisture, at ambient air temperature from minus 40 °Ñ
to plus 50 °Ñ.
Òèï èçäåëèÿ / Product type
Àðòèêóë / Order code
Äëèíà, ìì /
Length, mm
Ïàññàòèæè ñåðèè Ê1 / Pliers of Ê1 series
A2L3-PL10-K1-160
160
A2L3-PL10-K1-180
180
A2L3-PL10-K1-200
200
Êóñà÷êè áîêîâûå ñåðèè Ê1 / Side cutting pliers of Ê1 series
A2L3-PC10-K1-160
160
A2L3-PC10-K1-180
180
Êóñà÷êè áîêîâûå óñèëåííûå ñåðèè Ê1 /
Reinforced side-cutting pliers of Ê1 series
A2L3-HC10-K1-180
180
Òîíêîãóáöû ñåðèè Ê1 / Needle-nose pliers of Ê1 series
A2L3-LN10-K1-160
160
Òîíêîãóáöû èçîãíóòûå ñåðèè Ê1 /
Ñurved needle-nose pliers of Ê1 series
A2L3-BN10-K1-160
160
Êàáåëåðåç ñåðèè Ê1 / Cable cutter of Ê1 series
A2L3-CC10-K1-160
160
Êðóãëîãóáöû / Round-nose pliers
A2L3-RN10-K1-160
160
Êëåùè ïåðåñòàâíûå / Adjustable pliers
A2L3-SP20-K3-160
250
Òàáëèöà / Table 1 – Òåõíè÷åñêèå äàííûå øàðíèðíî-ãóáöåâîãî èíñòðóìåíòà /
Technical data of pliers
Òàáëèöà / Table 2 – Òåõíè÷åñêèå äàííûå îòâåðòîê /
Technical data of screwdrivers
9
Òèï èçäåëèÿ / Product type
Àðòèêóë / Order code
Òèï íàêîíå÷íèêà /
Type of screwdriver tip
Ðàçìåð øëèöà õ äëèíà
îòâ¸ðòêè, ìì / Screwdriver
slot size ґ length, mm
Îòâ¸ðòêà óíèâåðñàëüíàÿ
êðåñòîâàÿ ñåðèè Ê1 /
Allen Phillips-head screwdriver
of Ê1 series
A2L3-SC10-K1-PH-00-075
PH
0ґ75
A2L3-SC10-K1-PH-10-100
1ґ100
A2L3-SC10-K1-PH-20-100
2ґ100
A2L3-SC10-K1-PH-20-150
2ґ150
A2L3-SC10-K1-PH-20-038
2ґ38
A2L3-SC10-K1-PH-30-150
3ґ150
A2L3-SC10-K1-PZ-00-075
PZ
0ґ75
A2L3-SC10-K1-PZ-10-100
1ґ100
A2L3-SC10-K1-PZ-20-100
2ґ100
A2L3-SC10-K1-PZ-30-150
3ґ150
Îòâ¸ðòêà óíèâåðñàëüíàÿ
øëèöåâàÿ ñåðèè Ê1 /
Allen flathead screwdriver
of Ê1 series
A2L3-SC10-K1-SL-30-075
SL
3ґ75
A2L3-SC10-K1-SL-40-100
4ґ100
A2L3-SC10-K1-SL-50-125
5ґ125
A2L3-SC10-K1-SL-60-150
6ґ150
A2L3-SC10-K1-SL-60-038
6ґ38
A2L3-SC10-K1-SL-80-150
8ґ150
Îòâ¸ðòêà óíèâåðñàëüíàÿ
êîìáèíèðîâàííàÿ ñåðèè Ê1 /
Allen replacement screwdriver
of Ê1 series
A2L3-SC10-K1-HS-10-080
PH/SL
1ґ80
A2L3-SC10-K1-HS-20-100
2ґ100
A2L3-SC10-K1-ZS-10-080
PZ/SL
1ґ80
A2L3-SC10-K1-ZS-20-100
2ґ100
Òàáëèöà / Table 3
Íàèìåíîâàíèå / Denomination
Êîëè÷åñòâî, øò. (ýêç.) / Quantity, pcs (copies)
Èçäåëèå / Product
1
Ïëàñòèêîâûé ïîäâåñ / Plastic hanger
1
10
Òàáëèöà / Table 4 – Êîìïëåêòàöèÿ íàáîðîâ èíñòðóìåíòà / Toolkits contents
Àðòèêóë / Order code
Íàèìåíîâàíèå / Denomination
Ñîñòàâ íàáîðà / Kit contents
A2L3-NP10-K1-N01-03
ARMA2L 3 Íàáîð èíñòðóìåíòà
N-01 K1 3 øò IEK /
ARMA2L 3 Tool kit N-01 K1 3 pcs IEK
ARMA2L 3 Ïàññàòèæè 160 ìì K1 IEK /
ARMA2L 3 Ñombination pliers 160 mm K1 IEK
ARMA2L 3 Áîêîðåçû 160 ìì K1 IEK /
ARMA2L 3 Side-cutting pliers 160 mm K1 IEK
ARMA2L 3 Òîíêîãóáöû 160 ìì K1 IEK /
ARMA2L 3 Needle-nose pliers 160 mm K1 IEK
A2L3-NP10-K1-N02-03
ARMA2L 3 Íàáîð èíñòðóìåíòà
N-02 K1 3 øò IEK /
ARMA2L 3 Tool kit N-02 K1 3 pcs. IEK
ARMA2L 3 Ïàññàòèæè 160 ìì K1 IEK /
ARMA2L 3 Ñombination pliers 160 mm K1 IEK
ARMA2L 3 Êàáåëåðåçû 160 ìì K1 IEK /
ARMA2L 3 Cable cutters 160 mm K1 IEK
ARMA2L 3 Òîíêîãóáöû 160 ìì K1 IEK /
ARMA2L 3 Needle-nose pliers 160 mm K1 IEK
A2L3-NT10-K1-N03-06
ARMA2L 3 Íàáîð èíñòðóìåíòà
N-03 K1 6 øò IEK /
ARMA2L 3 Tool kit N-03 K1 6 pcs. IEK
ARMA2L 3 Ïàññàòèæè 160 ìì K1 IEK /
ARMA2L 3 Ñombination pliers 160 mm K1 IEK
ARMA2L 3 Áîêîðåçû 160 ìì K1 IEK /
ARMA2L 3 Side-cutting pliers 160 mm K1 IEK
ARMA2L 3 Òîíêîãóáöû 160 ìì K1 IEK /
ARMA2L 3 Needle-nose pliers 160 mm K1 IEK
ARMA2L 3 Ïàññàòèæè 160 ìì K1 IEK /
ARMA2L 3 Ñombination pliers 160 mm K1 IEK
ARMA2L 3 Êàáåëåðåçû 160 ìì K1 IEK /
ARMA2L 3 Cable cutters 160 mm K1 IEK
ARMA2L 3 Òîíêîãóáöû 160 ìì K1 IEK /
ARMA2L 3 Needle-nose pliers 160 mm K1 IEK
A2L3-NS10-K1-05
ARMA2L 3 Íàáîð îòâåðòîê K1 5 øò IEK /
ARMA2L 3 Screwdriver kit K1 5 pcs. IEK
ARMA2L 3 Îòâåðòêà PH1ґ100 K1 IEK /
ARMA2L 3 Screwdriver PH1ґ100 K1 IEK
ARMA2L 3 Îòâåðòêà PH2ґ100 K1 IEK /
ARMA2L 3 Screwdriver PH2ґ100 K1 IEK
ARMA2L 3 Îòâåðòêà SL3,0ґ75 K1 IEK /
ARMA2L 3 Screwdriver SL3,0ґ75 K1 IEK
ARMA2L 3 Îòâåðòêà SL4,0ґ100 K1 IEK /
ARMA2L 3 Screwdriver SL4,0ґ100 K1 IEK
ARMA2L 3 Îòâåðòêà SL5,0ґ125 K1 IEK /
ARMA2L 3 Screwdriver SL5,0ґ125 K1 IEK
A2L3-NS10-K1-08
ARMA2L 3 Íàáîð îòâåðòîê K1 8 øò IEK /
ARMA2L 3 Screwdriver kit K1 8 pcs. IEK
ARMA2L 3 Îòâåðòêà PH1ґ100 K1 IEK /
ARMA2L 3 Screwdriver PH1ґ100 K1 IEK
ARMA2L 3 Îòâåðòêà PH2ґ100 K1 IEK /
ARMA2L 3 Screwdriver PH2ґ100 K1 IEK
ARMA2L 3 Îòâåðòêà PZ1ґ100 K1 IEK /
ARMA2L 3 Screwdriver PZ1ґ100 K1 IEK
ARMA2L 3 Îòâåðòêà PZ2ґ100 K1 IEK /
ARMA2L 3 Screwdriver PZ2ґ100 K1 IEK
Andere Handbücher für ARMA2L 3 Series
1
Dieses Handbuch passt für folgende Modelle
1
Andere IEK Werkzeuge Handbücher
