IEP 30917 Bedienungsanleitung

Operating Instructions

Balancer for Multifunction Plug (30917)

Imprint:

method whatsoever is prohibited without the prior permission of Industrieelektronik Pölz

GmbH.

These operating instructions do not represent a contractual relationship.

We reserve the right to make changes errors and omissions excepted.

OPERATING INSTRUCTIONS

Balancer

TABLE OF CONTENTS

1Introduction ................................................................................................. 4

1.1 Liability and Warranty ..............................................................................................4

1.2 Customer Service.....................................................................................................4

1.3 About these Operating Instructions..........................................................................4

1.4 Explanation of Symbols and Instructions...................................................................5

2Safety Information ........................................................................................ 5

2.1 Intended Use ...........................................................................................................5

3Description of the Device .............................................................................. 6

3.1 Device Types............................................................................................................6

3.2 Type Plate................................................................................................................6

3.3 Device Overview ......................................................................................................6

4Installation ................................................................................................... 7

4.1 Unpacking the Balancer ...........................................................................................7

4.2 Installing the Balancer..............................................................................................7

4.2.1 Installing the Balancer in a Fixed Position..................................................................7

4.2.2 Installing the Balancer in a Movable Position ............................................................8

4.3 Suspending a Load ..................................................................................................8

4.4 Setting the Balancer.................................................................................................8

4.4.1 Increasing the Load-bearing Capacity.......................................................................9

4.4.2 Reducing the Load-bearing Capacity ........................................................................9

4.4.3 Setting the Rope Length ..........................................................................................9

5Operation................................................................................................... 10

6Dismantling ................................................................................................ 10

6.1 Setting Down the Load ..........................................................................................10

7Service ....................................................................................................... 10

7.1 Maintenance .........................................................................................................10

7.2 Cleaning................................................................................................................10

7.3 Repairs ..................................................................................................................10

8Appendix.................................................................................................... 11

8.1 Technical Data.......................................................................................................11

8.2 Disposal.................................................................................................................11

8.3 Declaration of Conformity (DoC)............................................................................11

OPERATING INSTRUCTIONS

Balancer

1Introduction

•The balancer pulls the multifunction

plug including the cable above head

height and keeps your workplace

clean and tidy.

•Over the entire rope range, the bal-

ancer has a uniform load-bearing ca-

pacity that you can set between 2 and

3 kg with a rope length of 1.6 m.

•You can set the retractable rope

length so that it is possible to keep the

multifunction plug within reach in dif-

ferent installation situations.

•The balancer consists of a sturdy die-

cast aluminium housing, flexible and

resilient stainless steel wire rope and is

characterized by its precise rope guid-

ance and the spring that is designed

for a long service life.

•Can be mounted on ceilings and walls.

1.1 Liability and Warranty

Use the balancer only in accordance with

its intended use (see also Chapter 2.1

INTENDED USE).

The manufacturer warranties the balancer

within the scope of the conditions of sale

and delivery that apply in each case.

The manufacturer accepts no liability for

damage due to ignoring the information

in these operating instructions as well as

to incorrectly assembling, operating or

servicing the balancer.

1.2 Customer Service

If you need technical information or have

any queries or need to order spare parts,

please contact your local dealer or e-mail

our customer service: office@poelz.at

To ensure that your inquiry is processed

quickly, please state the following infor-

mation:

•Device type

•Item number

You can find the device type on the type

plate (see also Chapter 3.2 TYPE PLATE). For

information on the item number, see also

Chapter 8.1 TECHNICAL DATA.

1.3 About these Operating Instruc-

tions

These operating instructions are a compo-

nent of the scope of supply; you must

always keep them at the location of the

balancer.

The guide includes all the information you

need for assembling the balancer, for

operating, servicing, dismantling and

disposing of it.

Read the operating instructions carefully

before using the system and observe the

safety and warning instructions to ensure

perfect operation of your balancer.

OPERATING INSTRUCTIONS

Balancer

1.4 Explanation of Symbols and

Instructions

This symbol warns you of a

hazard. This signal word de-

scribes the severity of the im-

minent danger.

Danger!

Personal injury can occur in the

case of incorrect handling.

Caution!

Damage to equipment or

property can occur in the case

of incorrect handling.

Danger electrical hazard!

This symbol warns you of an

electrical hazard.

Touching live parts can lead to

injury or even be fatal.

Fire hazard!

This symbol warns you of a fire

hazard.

Note!

This symbol indi-

cates tips and

useful infor-

mation on han-

dling the balancer

in the best possi-

ble way.

2Safety Information

The balancer has been manufactured and

inspected in accordance with valid stand-

ards and guidelines and recognized tech-

nical regulations. However, incorrect use

can lead to physical harm to users or

damage to the balancer or other material

assets.

Always comply to the letter with the safe-

ty information and warnings given in

these operating instructions.

2.1 Intended Use

The balancer is intended exclusively for

pulling a multifunction plug including the

cable up above head height as well as for

use indoors; it has a load-bearing capacity

of 2 to 3 kg.

OPERATING INSTRUCTIONS

Balancer

3Description of the

Device

3.1 Device Types

In these operating instructions, we will

describe the following device types.

•Balancer for multifunction plug

Item number: 30917

3.2 Type Plate

3.3 Device Overview

① Fastening holes

②Housing

③Rotary knob for setting the

load-bearing capacity

④Type plate

⑤Rope clamp

⑥Rope

⑦Snap hook

OPERATING INSTRUCTIONS

Balancer

4Installation

Danger!

Mount the balancer such that

it does not endanger anybody.

4.1 Unpacking the Balancer

Remove the packaging material.

ABalancer

BRetaining rope

CRing

DClamp

ESnap hook

Operating Instructions

Check that the contents of the package

are complete and inspect for possible

damage. If any components are missing or

are

damaged, contact our customer service

immediately (see also Chapter

1.2 CUSTOMER SERVICE).

4.2 Installing the Balancer

You can install the balancer on the wall or

on the ceiling by attaching it to a suitable

bracket. The bracket must be attached

securely to the ceiling of the hall and have

adequate load-bearing capacity.

Note!

Install the balancer such that

the rope can be moved freely.

Choose an installation height at which the

central part of the rope is loaded and

where you can easily reach the balancer

when the rope is retracted.

4.2.1 Installing the Balancer in a

Fixed Position

Screw the balancer in a fixed horizontal or

vertical position in at least two fastening

holes (①).

Use M8 nuts and bolts with a locking

device to prevent loosening (e.g. self-

locking hexagon nuts as per EN

10511/DIN 985).

OPERATING INSTRUCTIONS

Balancer

4.2.2 Installing the Balancer in a

Movable Position

Note!

We recommend installing the

balancer in a movable position

to ensure that the rope is not

subjected to friction.

Use the supplied snap hook (B) to fasten

the balancer and secure it with the retain-

ing rope (C) on the bracket, which you

should attach separately if possible.

Make sure that adequate lengths of the

retaining rope (C) are routed above one

another and that the clamp (D) blocks

both sections of the ropes that are on top

of one another.

4.3 Suspending a Load

Danger!

When suspending a load, hold

the rope tight, e.g. on the rope

cla

mp (⑤); otherwise, it could

fly back and cause injuries.

Use suitable, safe fastenings to suspend

the multifunction plug including the cable.

Note!

If you choose to install the

balancer in a fixed position,

you can use the supplied

securing components

like the

rope, clamp and ring, for

example, to suspend the mul-

tifunction plug.

4.4 Setting the Balancer

Caution!

Make sure that the rope is not

pulled out completely. There

should be at least 5

cm left.

If necessary, move the rope

clamp (

⑤) and lock it to limit

the lift upwards.

Estimate the weight of the multifunction

plug including the cable. You can find

details of the weight of the multifunction

plug in the combined plug and socket

operating instructions.

Set the necessary load-bearing capacity on

the rotary knob (③). The setting range

for the load-bearing capacity is between 2

and 3 kg.

OPERATING INSTRUCTIONS

Balancer

The arrows on the housing (②) show the

direction of rotation to increase or reduce

the load-bearing capacity.

4.4.1 Increasing the Load-bearing

Capacity

Turn the rotary knob (③)to the left (anti-

clockwise) to increase the load-bearing

capacity.

4.4.2 Reducing the Load-bearing

Capacity

Turn the rotary knob (③)to the right

(clockwise) to reduce the load-bearing

capacity.

4.4.3 Setting the Rope Length

If you want to set a rope length of less

than 1.6 m, proceed as follows:

1. Loosen the screws on the rope clamp

(⑤) until you can move it.

2. Position the rope clamp (⑤)at the

desired position.

3. Tighten up the screws.

OPERATING INSTRUCTIONS

Balancer

5Operation

Check the condition of the rope (⑥) at

regular intervals.

On a regular basis, check that the parts

under load are secure and have not been

weakened by wear.

Make sure that the load-bearing capacity

is always set correctly.

6Dismantling

6.1 Setting Down the Load

Danger!

When setting down a load,

hold the rope tight, e.g. on the

rope clamp (

⑤); otherwise, it

could fly back and cause inju-

ries.

7Service

Danger!

Servicing work must only be

carried out by qualified people

who have been tasked with this

work.

7.1 Maintenance

Note!

The balancer is

maintenance-

free.

If particularly heavy loading makes it nec-

essary to carry out repairs, contact cus-

tomer service (see Chapter 1.2 CUSTOMER

SERVICE).

7.2 Cleaning

Always keep the rope and the area round

the rope draw-in device clean.

7.3 Repairs

Danger!

Only the manufacturer or a

qualified service engineer are

allowed to replace springs.

Under no circumstances try to carry out

repairs yourself.

Inhaltsverzeichnis

Andere IEP Werkzeuge Handbücher

IEP

IEP Spidy ROLLER 230 V Bedienungsanleitung

Beliebte Werkzeuge Handbücher anderer Marken

Martor

Martor SECUNORM 175 Bedienungsanleitung

ERKCO

ERKCO 1000 Bedienungsanleitung

jbc

jbc N4473 Bedienungsanleitung

FEINMETALL

FEINMETALL FZWZ-SET-001 Bedienungsanleitung

Worx Professional

Worx Professional Sonicrafter WU676 Bedienungsanleitung

Gage Bilt

Gage Bilt GB713SH Bedienungsanleitung

Hilti

Hilti DX 9-ENP Bedienungsanleitung

norbar

norbar NORTRONIC 34399 Bedienungsanleitung

BGS technic

BGS technic 8578 Bedienungsanleitung

Makita

Makita DHR241 Bedienungsanleitung

Motor Guard

Motor Guard JMB-1250 Bedienungsanleitung

Power Adhesives

Power Adhesives 805-12 Bedienungsanleitung

Clemco

Clemco 24189 Bedienungsanleitung

VVG

VVG VNG 903 Series Bedienungsanleitung

Hilti

Hilti FX 3-A Bedienungsanleitung

Grizzly

Grizzly H6472 Bedienungsanleitung

axing

axing BWZ 5-02 Bedienungsanleitung

Dh-Robotics

Dh-Robotics RGI-100 Anleitung zur Verwendung