Ifi NEO iDSD Bedienungsanleitung

User Manual

Thank you for purchasing the iDSD from Neo series. The NEO iDSD is a balanced USB and Bluetooth

DAC/amplier.

FEATURES:

1. First DAC to support all Hi-Res: DSD512, PCM768, MQA384kHz and Bluetooth 96kHz.

2. Completely purist design without any DSP.

3. Bluetooth 5.0 (aptx, aptX HD, aptX Adaptive, aptX LL, LDAC, HWA/LHDC, AAC and SBC) up to

24/96kHz.

4. Fully-balanced diﬀerential DAC/amplier with >1,040mW output.

5. Ultra-fast USB interface with 16 logic cores and up to 2000MIPS 512KB SRAM.

6. Audiophile-grade components designed to reproduce music without any distortion or

colouration.

7. Native DSD/PCM Burr-Brown® 4-channel DAC chipset.

8. Perfectly natural sound pleasing even the most demanding audio connoisseurs with the built-in

MQA le decoding.

9. Extremely low THD: <0.0015 % and ultra-high SNR: >120 dB.

10. Digital inputs: USB3.0 B (USB2.0 compatible)/S-PDIF (coaxial/optical)/Bluetooth 5.0 .

Single-ended 6.3mm analogue output

Balanced 4.4mm analogue output

OLED display

Multi-function knob

Input channel selector/Bluetooth pairing button

P.4

P.4-5

P.5-6

P.6

2 3 4 5 6

4. Power On/Oﬀ

Techn ology l icens ed from A MR-Au dio, U K

Ass emble d in Chin a

DC 5V/2.5A

COAXIAL

Outputs Digital Inputs

OPTIC AL

Ne o

DS D

XLR balanced analogue output

RCA single-ended analogue output

P.7

Optical digital input

USB audio input

10.

11.

810 11 12

Coaxial digital input

P.7P.6

DC 5V power input

12.

Antenna

13.

P.7

1. OLED display

The OLED display shows the audio format, sampling rate, volume and input mode.

2. Multi-function knob

This knob controls:

- Variable/Fixed mode (use with power button)

- Analogue volume control (turn)

- Mute (short press)

- Brightness (long press)

I) Variable/Fixed mode selection

This mode will determine whether or not the NEO iDSD analogue volume control is used.

The NEO iDSD must rst be switched oﬀ to allow mode selection when powering on.

Hold down the knob rst, and then press the power button to enter the Variable/Fixed mode selection.

Turn the knob to cycle between the two modes. Release to accept.

If no mode is selected the NEO iDSD will automatically select the previously used mode.Tip:

ii) Analogue volume control

The analogue volume control in the NEO iDSD is superior to any digital volume control. When set to

'Variable', it can be used to control the headphone or the pre-amplier volume. If the mode is set to

'Fixed', the volume control is bypassed.

The NEO iDSD uses ONLY a pure analogue volume control.Note:

iii) Mute

Press the rotary knob to mute. To unmute, press it again or turn the rotary knob.

iv) Brightness

Press and hold the knob (3 seconds) to enter brightness selection. Rotate the knob to cycle through

the three brightness modes and press to accept.

With the 'high' and 'low' brightness modes, the OLED will remain on. With the brightness mode 'oﬀ ', if no operation is performed, the Note:

OLED will go to sleep after three seconds.

3. Input channel selector/Bluetooth pairing

This button cycles through 4 inputs:

The NEO iDSD receives Bluetooth signals via aptX, aptX HD, aptX Adaptive, aptX LL, LDAC, LHDC/HWA, AAC and SBC.

Coaxial Optical USB Bluetooth

Bluetooth pairing

From selecting the Bluetooth input, the NEO iDSD's OLED will ash searching for the previously paired device.

If it cannot nd the stored device, it will automatically enter pairing mode and ash.

To enter pairing mode, press and hold the button (for three seconds) until the Bluetooth icon ashes. To pair, nd

the iFi Hi-Res Audio Bluetooth device from the nearby devices list on your phone.

The NEO iDSD can store up to 8 paired Bluetooth devices.

4. Power On/Oﬀ

Press the power switch to power on/oﬀ the NEO iDSD.

5. Balanced 4.4mm analogue output

Connect balanced 4.4mm headphones.

As the NEO iDSD is a balanced design, we recommend the 4.4mm balanced output.Tip:

6. Single-ended 6.3mm analogue output

Connect single-ended 6.3mm headphones. With single-ended 3.5mm headphones, connect using a 3.5mm to

6.3mm adapter.

7. XLR balanced analogue output

Balanced analogue signal output to an amplier.

8. RCA unbalanced analogue output

Single-ended signal output to an amplier.

9. Coaxial Digital input

Connect an S/PDIF source such as Apple TV, Google Chromecast, PS4, Xbox, a high-end CD transport, etc.

Optical Digital input

Connect an S/PDIF source such as Apple TV, Google Chromecast, PS4, Xbox, a high-end CD transport, etc.

USB audio input

This is a USB 3.0 B input (USB2.0 compatible). For a superior connection to a computer, use the enclosed USB3.0

cable. It connects the NEO iDSD to the computer audio source.

DC 5V power input

Please connect the NEO iDSD to the enclosed power supply, the super-silent iPower. The NEO iDSD must ONLY be

For best performance upgrade iPower to an ultra-low noise iPower X 5V power supply.Tip:

Antenna

Please attach the enclosed antenna for maximum reception quality.

11.

10.

12.

13.

MQA

The NEO iDSD includes MQA(*) technology, which enables you to play back MQA(*) audio les and streams,

delivering the sound of the original master recording.

* MQA

1) Listen to MQA (Master Quality Authenticated) les straight out of the box.

2) For MQA tracks, simply connect to Tidal and check the options to stream MQA.

3) Visit mqa.co.uk for more information.

The NEO iDSD includes MQA technology, which enables you to play back MQA audio les and streams. ‘MQA’ or ‘MQA.’ indicates that the product

is decoding and playing an MQA stream or le, and denotes provenance to ensure that the sound is identical to that of the source material.

‘MQA.’ indicates it is playing an MQA Studio le, which has either been approved in the studio by the artist/producer or has been veried by the

Inhaltsverzeichnis

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung

ifi NEO iDSD Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken