iFLY GPS 520 Bedienungsanleitung
Thank you for purchasing this product.
This user manual is for your convenience and safety when using this product.
Before operating the product and to take full advantage of navigation system, please read the manual carefully and follow its instructions.
Depending on the navigation system model type, the contents of this owner’s manual may vary.
The navigation system and the owner’s manual are subject to changes in function or performance without prior notice for the convenience of users.
Adventure Pilot will not be responsible for any equipment damage resulting from improper installation or use.
BEFORE USE
Welcome!
2
-
-
-
-
-
-
Make sure that the unit is installed securely to prevent the stand from coming offor moving during operation. It might cause an accident.
The GPS receiver might not function normally in some panels with excess interference, limited view of the sky or recessed into the panel.
In these cases, please contact our sales representative to buy an external GPS antenna which is sold as an optional item.
GPS signals might be affected in some areas due to weak electrical waves or during high solar activity.
Use the navigation unit only for situational reference only. Map data must be updated to avoid erroneous data.
Do not use it where it is hot and humid. Store product out of direct sunlight to prevent it from damage due to prolonged UV exposure.
Make sure that water or other liquids do not get inside the product. This could cause re or electric shock.
To reduce the risk or electric shocks, do not open the cover (or back). There are no user-serviceable parts inside.
The GPS receiver operates optimally at 0℃to 50℃. If the temperature inside of the plane is too low or too high, the product might not function optimally.
Make sure that the optimal temperature is maintained.
If the windshield mount is attached to the glass of the windscreen for a long time, it might come offdue to reduced adhesiveness.
The memory card (SD or SDHC) could be damaged if used with any other devices.
Do not remove the memory card (SD or SDHC) while the product is in operation. All Data and Software is contained on the SD card.
Do not touch the product with wet hands. This might cause electric shock or damage.
Do not disassemble or drop the product. It might cause damage or a mechanical breakdown.
Use only the specied power adaptor or a 12 -28 volt source. Using a different type of adaptor might cause damage or a mechanical breakdown.
Touch the LCD with ngers or blunt devices only. Avoid sharp metal objects and they might cause screen damage.
Use only soft and dry cotton cloth when cleaning the product. Do not use strong solvents such as alcohol, benzene, or thinners, as these might
damage the surface of the product
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
BEFORE USE
Precautions while using
3
Basic Components
Optional Components
External Appearance
Installing Instructions
USB Pin
Turning Power On
Main Menu Screen
GETTING STARTED
------------ 6
------------ 7
------------ 8
------------ 11
------------ 13
------------ 14
------------ 15
Using Multimedia
Music
Video
Photo
Using Applications
Calculator
Memo
Using Settings
BASIC OPERATION
------------ 17
------------ 19
------------ 21
------------ 23
------------ 24
------------ 25
Cause of Error Occurrence in GPS
Cautions During Use Of GPS
COMMON KNOWLEDGE ON GPS
------------ 30
------------ 31
CONTENTS
4
Self Check List
Specication
SUPPORT GUIDE
------------- 33
------------- 34
Table of Contents
GETTING STARTED
5
※Due to improvement in better quality and performance, the real enclosed SD card reader is subject to change without notice.
MAIN UNIT SD CARD READER,
MICRO SD CARD
MOUNT HOLDER
CIGAR CHARGER
STICKY PAD DASH MOUNT
GETTING STARTED
Basic Components
6
EXTERNAL GPS ANTENNA
GETTING STARTED
Optional Components
7
RAM Mount Adapter
External Battery
RAM Yoke Mount Kit
USB – Serial Cable
External Appearance
LCD TOUCH SCREEN
Operate all functions by touching the screen.
Record any sounds and pictures that you see on the screen.
GETTING STARTED
8
Front View
LCD TOUCH SCREEN
External Appearance
GETTING STARTED
9
BRIGHTNESS
SPEAKER
POWER BUTTON
SD CARD SLOT
USB HOST
AUX
MOUNT HOLDER
MOUNT HOLDER MOUNT HOLDER
CHARGING LED
EXTERNAL GPS
CONNECTION TERMINAL
Rear View / Side View
DC 12V~24V
RESET
GETTING STARTED
External Appearance
10
! LED LAMP
Indicating battery charging status.
! MOUT HOLDER
To mount on the cradle.
! EXTERNAL GPS CONNECTION TERMINAL
External connection in order to improve reception
efficiency of GPS.
! BRIGHTNESS
To control brightness.
! POWER BUTTON
To switch power on and off.
! SPEAKER
Vocal guidance and audio output.
! RESET
Resetting your product battery.
! DC 12V~24V POWER SOCKET
Connect the dedicated cigar charger or Home AC-DC adaptor
only; do not use the standard cigar charger or AC-DC adaptor.
(AC-DC adaptor is an optional and sold separately.)
! AUX
Audio out and for connecting a external speaker
! SD CARD SLOT
Insert a micro SD card.
! USB HOST
To connect USB – Serial for external device integration.
Rear View / Side View
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere iFLY GPS GPS Handbücher
