UK
3
2.1.1 Mounting using the wall xture E2D401
►Mount the wall fixture on a free, flat sur-
face using four screws.
Make sure that the fixture is safely screwed
and the wall can carry the weight of the
Touch Panel PC.
The mounting holes of the wall fixture meet
the VESA 100 standard.
►Screw the four supplied M4 screws in
the external threaded holes of the Touch
Panel PC and tighten them.
►Insert the screw heads in the mounting
holes of the wall fixture and pull the Touch
Panel PC downwards carefully.
Check that all four screws are safely located
in the mounting holes.
2.2 Control panel mounting
The mounting set E2D402 is suitable for control panel mounting:
www.ifm.com
→
Data sheet search → E2D402
Panel mounting using this mounting set is described in the following section.
►Screw the screws (1) of the mounting set
into the six brackets (2).
►Position and securely fasten the plastic
caps (3).
