IFM PN7191 Bedienungsanleitung

Operating instructions
Electronic pressure sensor
PN7191 UKUK
11420494 / 00 10 / 2021

2
Contents
1 Preliminary note���������������������������������������������������������������������������������������������������3
1�1 Symbols used ������������������������������������������������������������������������������������������������3
2 Safety instructions �����������������������������������������������������������������������������������������������4
3 Functions and features ����������������������������������������������������������������������������������������5
3�1 Applications ���������������������������������������������������������������������������������������������������5
4 Function���������������������������������������������������������������������������������������������������������������5
4�1 Operating modes �������������������������������������������������������������������������������������������6
4�2 Communication, parameter setting, evaluation ���������������������������������������������7
4�3 Switching function������������������������������������������������������������������������������������������7
4�4 IO-Link �����������������������������������������������������������������������������������������������������������8
4�4�1 General information ������������������������������������������������������������������������������8
4�4�2 Functions only available via IO-Link communication����������������������������8
5 Installation������������������������������������������������������������������������������������������������������������9
6 Electrical connection��������������������������������������������������������������������������������������������9
7 Operating and display elements ������������������������������������������������������������������������10
8 Menu������������������������������������������������������������������������������������������������������������������ 11
8�1 Menu structure: main menu������������������������������������������������������������������������� 11
8�2 Explanation of the menu������������������������������������������������������������������������������12
8�2�1 Explanation of menu level 1 ���������������������������������������������������������������12
8�2�2 Explanation of menu level 2 ���������������������������������������������������������������12
9 Parameter setting ����������������������������������������������������������������������������������������������13
9�1 Parameter setting in general �����������������������������������������������������������������������13
9�2 Define the operating mode (optional)) ���������������������������������������������������������16
9�3 Configure display (optional)�������������������������������������������������������������������������16
9�4 Set output signals ����������������������������������������������������������������������������������������17
9�4�1 Set output functions����������������������������������������������������������������������������17
9�4�2 Set switching limits for the hysteresis function �����������������������������������17
9�4�3 Set switching limits for the window function ���������������������������������������17
9�5 User settings (optional)��������������������������������������������������������������������������������18
9�5�1 Set delay time for the switching outputs ���������������������������������������������18
9�5�2 Set output logic for the switching outputs �������������������������������������������19
9�5�3 Set damping for the switching signal ��������������������������������������������������19

3
UK
9�5�4 Reset all parameters to factory setting �����������������������������������������������19
9�5�5 Set colour change of the display �������������������������������������������������������20
9�5�6 Graphical depiction of the colour change of the display ���������������������21
9�6 Diagnostic functions ������������������������������������������������������������������������������������24
9�6�1 Read min/max values for the system pressure ����������������������������������24
9�6�2 Read overload processes ������������������������������������������������������������������24
10 Operation���������������������������������������������������������������������������������������������������������24
10�1 Read the set parameters ���������������������������������������������������������������������������24
10�2 Self-diagnostics / fault indications ������������������������������������������������������������25
11 Technical data ��������������������������������������������������������������������������������������������������26
11�1 Setting ranges��������������������������������������������������������������������������������������������26
11�1�1 Setting ranges in operating mode 2��������������������������������������������������26
11�1�2 Setting ranges in operating mode 3��������������������������������������������������26
11�2 Further technical data ��������������������������������������������������������������������������������27
12 Factory setting �������������������������������������������������������������������������������������������������27
1 Preliminary note
1.1 Symbols used
►Instruction
> Reaction, result
[…] Designation of keys, buttons or indications
→Cross-reference
Important note
Non-compliance may result in malfunction or interference
Information
Supplementary note

4
2 Safety instructions
• The device described is a subcomponent for integration into a system�
- The manufacturer is responsible for the safety of the system�
- The system manufacturer undertakes to perform a risk assessment and to
create documentation in accordance with legal and normative requirements
to be provided to the operator and user of the system� This documentation
must contain all necessary information and safety instructions for the operator,
the user and, if applicable, for any service personnel authorised by the
manufacturer of the system�
• Read this document before setting up the product and keep it during the entire
service life�
• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions�
• Only use the product for its intended purpose (→ Functions and features).
• Only use the product for permissible media (→ Technical data).
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur�
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator�
• Installation, electrical connection, set-up, programming, configuration, operation
and maintenance of the product must be carried out by personnel qualified and
authorised for the respective activity�
• Protect units and cables against damage�

5
UK
3 Functions and features
The device monitors the system pressure of machines and installations�
3.1 Applications
Type of pressure: relative pressure
Information on pressure rating and bursting pressure → data sheet.
Avoid static and dynamic overpressure exceeding the specified overload
pressure by taking appropriate measures� The indicated bursting pressure
must not be exceeded�
Even if the bursting pressure is exceeded only for a short time, the unit
may be destroyed� NOTE: Risk of injury!
The units are vacuum resistant�
Pressure Equipment Directive (PED):
The units comply with the Pressure Equipment Directive and are designed
and manufactured for group 2 fluids in accordance with the sound
engineering practice� Use of group 1 fluids on request!
4 Function
• The unit displays the current system pressure�
• It generates output signals according to the operating mode and the parameter
setting�
• It moreover provides the process data via IO-Link�
• The unit is designed for fully bidirectional communication�
So the following options are possible:
- Remote display: reading and displaying the current system pressure�
- Remote parameter setting: reading and changing the current parameter
setting�
- IO-Link parameter setting (→ 4.4)

6
4.1 Operating modes
Operating mode 2
Description Operating mode on delivery�
Application Standard applications�
IODD designation E�g� PN7191 Factory setting / (CMPT = 2):
At www�ifm�com in the download area of the corresponding article�
Operating mode 3
Description High IO-Link process value and parameter resolution
(device-specific: see IODD suitable for the operating mode)�
The menu items [ou1] and [ou2] are extended by the setting
option [OFF] (→ 9.4.1)�
IO-Link standard command "Flash on" is available (→ 4.4.2)�
The following IO-Link markings are available: Application Specific
Tag, Function Tag and Location Tag (→ 4.4.2)�
Application Improved controllability via IO-Link�
Highly granular setting of switch-on and switch-off points�
IODD designation E�g� PN7191 Status_B High Resolution / (CMPT = 3):
At www�ifm�com in the download area of the corresponding
article�
Manual selection of the operating mode see (→ 9.2), selection of the
operating mode via IO-Link interface see → additional document on the
selection of the operating mode at www�ifm�com

7
UK
4.2 Communication, parameter setting, evaluation
OUT1 (pin 4) • Switching signal for system pressure limit
• Communication via IO-Link
OUT2 (pin 2) • Switching signal for system pressure limit
4.3 Switching function
OUTx changes its switching status if it is above or below the set switching limits
(SPx, rPx)� The following switching functions can be selected:
• Hysteresis function / normally open: [OUx] = [Hno] (→ fig. 1).
• Hysteresis function / normally closed: [OUx] = [Hnc] (→ fig. 1).
First the set point (SPx) is set, then the reset point (rPx)�
The hysteresis defined remains even if SPx is changed again�
• Window function / normally open: [OUx] = [Fno] (→ fig. 2).
• Window function / normally closed: [OUx] = [Fnc] (→ fig. 2).
The width of the window can be set by means of the difference between FHx
and FLx� FHx = upper value, FLx = lower value�
FH
FL
1 2
P = system pressure; HY = hysteresis; FE = window
When set to the window function the set and reset points have a fixed
hysteresis of 0�25 % of the measuring span�

8
4.4 IO-Link
4.4.1 General information
This device has an IO-Link communication interface which requires an IO-Link
capable module (IO-Link master) for operation�
The IO-Link interface enables direct access to the process and diagnostic data
and provides the possibility to set the parameters of the unit during operation�
In addition communication is possible via a point-to-point connection with a USB
adapter cable�
The IODDs necessary for the configuration of the unit, detailed information about
process data structure, diagnostic information, parameter addresses and the
necessary information about the required IO-Link hardware and software can be
found at www�ifm�com�
4.4.2 Functions only available via IO-Link communication
• HIPC: number of overload processes (→ 9.6.2)�
• HIPS: threshold for the overload counter (→ 9.6.2)�
• Flash on: via this standard command, the sensor can be localised in the plant�
When the command is used, the switching status LEDs flash and "IO-L" is
displayed�(Function only available in operating mode [3])�
• Application Specific Tag: freely definable text assigned to the unit�
• Function Tag: freely definable text describing the device function in the plant�
(Function only available in operating mode [3])�
• Location Tag: freely definable text describing the installation location in the
plant� (Function only available in operating mode [3])�
For more detailed information refer to the device-specific IO Device Description
PDF at www�ifm�com�

9
UK
5 Installation
Before installing and removing the unit: Make sure that no pressure is
applied to the system�
►Insert the unit in a G¼ process connection�
►Tighten firmly� Recommended tightening torque: 25���35 Nm�
Depends on the sealing type, the pressure load and the lubrication!
The sensor housing can be rotated by 345° with regard to the process connection�
Do not rotate past the end stop!
6 Electrical connection
The device must be connected by a qualified electrician�
The national and international regulations for the installation of electrical
equipment must be adhered to�
Voltage supply according to EN 50178, SELV, PELV�
►Disconnect power�
►Connect the device as follows:
Core colours
43
2 1
BN
WH
BK
BU
4
1
3
2OUT2
L+
L
OUT1
BK black
BN brown
BU blue
WH white
OUT1: switching output or IO-Link
OUT2: switching output
Colours to DIN EN 60947-5-2
Example circuits
2 x positive switching 2 x negative switching
L
L+
3
4
2
1
BU
BK
WH
BN
2: OUT2
4: OUT1 L
L+
3
4
2
1
BU
BK
WH
BN
2: OUT2
4: OUT1

10
7 Operating and display elements
321
9 10 11
4 5 6 7 8
12
1 to 8: Indicator LEDs
LED 1 Switching status OUT1 (on if output 1 is switched)�
LED 8 Switching status OUT2 (on if output 2 is switched)�
LEDs
2 - 7
System pressure in the indicated unit of measurement�
9: Enter button [●]
- Selection of the parameters and acknowledgement of the parameter values�
10 to 11: Arrow keys up [▲] and down [▼]
- Setting of the parameter values (scrolling by holding pressed, incrementally by pressing
once)�
12: Alphanumeric display, 4 digits
- Display of the current system pressure�
- Display of the parameters and parameter values�
Inhaltsverzeichnis
Andere IFM Sicherheitssensor Handbücher

IFM
IFM GG854S Bedienungsanleitung

IFM
IFM PI299 Series Bedienungsanleitung

IFM
IFM PN701 Series Bedienungsanleitung

IFM
IFM UGT515 Bedienungsanleitung

IFM
IFM OJ50 laser Series Bedienungsanleitung

IFM
IFM LK81 Series Bedienungsanleitung

IFM
IFM efector 160 LK7 Bedienungsanleitung

IFM
IFM SBZ224 Bedienungsanleitung

IFM
IFM O5P5 Series Bedienungsanleitung

IFM
IFM PN2090 Bedienungsanleitung

IFM
IFM LI213 Series Bedienungsanleitung

IFM
IFM PI1689 Bedienungsanleitung

IFM
IFM UGT592 Bedienungsanleitung

IFM
IFM OPD101 Bedienungsanleitung

IFM
IFM OJ51 Series Bedienungsanleitung

IFM
IFM OY95 S Series Bedienungsanleitung

IFM
IFM R1D Series Bedienungsanleitung

IFM
IFM UGR502 Bedienungsanleitung

IFM
IFM O1D110 Bedienungsanleitung

















