iGenix IGFD2016W Bedienungsanleitung
Please read these instructions carefully before use and retain for future reference
Before switching on your appliance,
always check for any damage which may have been caused in transit
IGFD2016W
16 Inch Digital Pedestal Fan White
USER MANUAL
2
CONTENTS
Important Safety Instructions...............................................3-5
Product Overview ..................................................................5-6
Assembly Instructions............................................................7-9
Operating Instructions...................................................... 10-11
Cleaning and Maintenance ..................................................... 11
Anomalies and Repair ............................................................. 11
Trouble Shooting Guide.......................................................... 12
Fuse Replacement.................................................................... 13
Disposal Information............................................................... 13
Igenix Warranty Terms and Conditions......................... 14-15
3
IMPORTANT SAFETY INSTRUCTIONS
Read and follow all of the instructions even if you feel you are
familiar with the product, and nd a place to keep this manual handy
for future reference.
Important: This appliance is intended for use in a domestic
environment only. Any other use is not recommended by the
manufacturer and may cause re, electrical shocks or other injury
to user or property.When using electrical appliances, basic safety
precautions should always be followed:
• Before plugging in the appliance, check that the voltage indicated
on the rating label corresponds with the main voltage in your
home.
• Do not operate the unit with a damaged cord or plug, after it
malfunctions or has been dropped or damaged in any way. Return
to an authorised service facility for examination and repair.
• Ensure that the fan head is not blocked or covered.
• Do not place the unit too close to curtains or other objects -
min 30cm.
• Make sure there are no objects near the unit which can prevent
it from oscillating.
• Never insert ngers, pencils or any other objects into the unit,
and especially not during the operation.Warn your children
against these dangers.
• Cleaning and user maintenance shall not be made by children.
• Keep the appliance and its cord out of reach of children.
• Children shall not play with the appliance.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
• Unplug the unit from the socket when not in use Do not force
4
the power cord. Never use the power cord to lift up, carry or
unplug the appliance.
• Do not use the unit near a bath, shower, swimming pool or
anywhere it could be splashed with water.
• Do not expose the unit to direct sunlight.
• Do not immerse the appliance or the electrical cord or plug in
any type of liquid.
• Do not use the appliance near a source of heat.
• Do not use the unit near ammable or explosive gases.
• Before cleaning the unit, switch it off and unplug the power cord.
• Do not leave the unit unattended during operation.Always
unplug the power cord when not in use.
• To repair the unit, take it to a qualied service engineer. Repairs
carried out by unqualied people may cause damage to the unit
or injury to persons or property and void the warranty.
• Ensure that the fan is switched off from the supply mains before
starting any installation or assembly operation.
• This appliance is for domestic use only, not for industrial use.
• Connect the appliance to a socket that can supply a minimum of
10 amperes.
• The appliance’s plug must t into the mains socket properly. Do
not alter the plug. Do not use plug adapters.
• The appliance must be used and placed on a at, stable surface.
• Do not use the appliance in association with a programmer, timer
or other device that automatically switches it on.
• Check the state of the power cord. Damaged or tangled cables
increase the risk of electric shock.
• The appliance is not suitable for outdoor use.
• Do not touch the plug with wet hands.
• Do not touch any of the appliance’s moving parts while it is
operating.
• Do not use the appliance to dry pets or animals.
• Do not use the appliance to dry textiles of any kind.
NOTE: Any misuse or failure to follow the instructions for use
5
renders the guarantee and the manufacturer’s liability null and void.
PRODUCT OVERVIEW
ABCDE
FG
IH
L
J
N
M
O
P
K
A. Front Grill
B. Blade Fastening Nut
C . Fan Blades
D. Grill Fastening Nut
E. Back Grill
F. Motor Shaft
G. Motor Cover
H. Fan Head
I. Control Panel
J. Fan Head Bolt
K. Power Cord
L. Adjustable Tube
M. Bottom Tube Bolt
N. Bottom Tube
O. Base
P. Plastic Nut
6
Display
* Note: Display will dim and not show LED after 30 seconds
1
3
4
5
6
7
2
A
B
C
D
E
1. LED Display
2. Function Lights
3. Oscillation Button
4. Timer Button
5. Modes Button
6. Speed Button
7. On/Off Button
A. Speed Button
B. Modes Button
C . Timer Button
D. Oscillation Button
E. On/Off Button
Remote Control
7
L
N
M
O
P
ASSEMBLY INSTRUCTIONS
Be sure to remove all packaging material from the
appliance.
IMPORTANT: Remove parts from each separate component before
performing installation
BASE INSTALLATION:
The appliance should be used with its base tted.
• Attach the bottom tube (N) to the base (O) and x it with the plastic nut
(P).
• Loosen the bottom tube bolt (M) and carefully pull up the adjustable tube
(L). Tighten the bolt (M) again so the adjustable tube is xed at its highest
position.
• Loosen the bolt (J) on the fan head. Fit the fan head (H) and the adjustable
tube (L) together and tighten the bolt (J) again.
FG
IH
J
8
Front and Rear Grill Installation
ABCDE
FG
• Remove the grill fastening nut (D) and blade fasten nut (B) from the motor
shaft (F).
• Attach the back grill (E) to the motor cover (G) and x it with the grill fasten
nut (D).
IMPORTANT NOTE: make sure to align the 3 holes on the back grill (E)
with the corresponding pins on the motor cover (G) before securing the grill
fastening nut (D)
• Attach the fan blades (C) to the motor shaft (F) and x it with the blade
fasten nut (B).
• Attach the front grill (A) to the back grill (E). Use the grill ring to carefully
hold them together and lock them using the screw provided on the grill
buckle.
ADJUSTING THE HEIGHT:
• The height of this fan can be adjusted
from approximately 110cm to 135cm.
• To adjust the height simply loosen
the bottom tube bolt (M). Move the
adjustable tube (L) to the desired
position and tighten the bolt (M) again.
L
M
9
Remote
Before use, pull out the plastic card from the bottom of the remote. Please make
sure the remote is directed towards the fan when operating.
NOTE: this remote does NOT come with a battery as standard - 1 x CR2032
button battery is required for operation
10
Extend the cable completely before plugging it in.
Connect the appliance to the mains.
Turn the appliance on, by using the on/off button (7/E).
Breeze - The fan alternates periods of more and less power, simulating the
feeling of a soft breeze.The amplitude of these shifts depends on the
speed selected.
Night - When the fan is at speed 3, it runs at speed 3 for 30 minutes, then at
speed 2 for 30 more minutes and nally at speed 1 until it is turned off
or timer runs out.When the fan is at speed 2, it runs at speed 2 for 30
minutes and then it keeps running at speed 1 until it is turned off or
timer runs out. When the fan is at speed 1, it simply keeps running at
speed 1 until it is turned off or timer runs out.
Normal - The fan operates constantly at the selected speed
To activate these function, press the modes button (5/B g 2/3). The illuminated
light will show which mode is selected
Oscillation Function:
The oscillation function makes it possible to direct the ow from the apparatus
so that it automatically alternates over a range of approximately 80º.
To activate this function, press the oscillation button (3/D).
The oscillation light will turn on.
To deactivate this function, press the oscillation button again.
Timer Function:
The appliance’s operating time can be controlled (1-15h).
To program the operating time simply select it using the timer button (4/C). For
every press the time will be increased 1 hour.
The time programmed will appear on the LED display (1), and the timer light will
turn on.
After the selected time the appliance will switch off automatically.
OPERATING INSTRUCTIONS
Inhaltsverzeichnis
Andere iGenix Lüfter Handbücher
iGenix
iGenix DF1670 Bedienungsanleitung
iGenix
iGenix DF9010 Bedienungsanleitung
iGenix
iGenix DF0004 Bedienungsanleitung
iGenix
iGenix IGFD4009W Bedienungsanleitung
iGenix
iGenix DF1655 Bedienungsanleitung
iGenix
iGenix IGFD6043W Bedienungsanleitung
iGenix
iGenix DF0021 Bedienungsanleitung
iGenix
iGenix DF0029BL Bedienungsanleitung
iGenix
iGenix DF9010 Bedienungsanleitung
iGenix
iGenix DF1660 Bedienungsanleitung
iGenix
iGenix DF0030 Bedienungsanleitung
iGenix
iGenix DF1250 Bedienungsanleitung
iGenix
iGenix DF0006 Bedienungsanleitung
iGenix
iGenix DF0050 Bedienungsanleitung
iGenix
iGenix DF0029 Bedienungsanleitung
iGenix
iGenix DF0022 Bedienungsanleitung
iGenix
iGenix IGFD6035W Bedienungsanleitung
iGenix
iGenix DF1656 Bedienungsanleitung
iGenix
iGenix DF0035T Bedienungsanleitung
iGenix
iGenix DF2900 Bedienungsanleitung
